Study on Effects of Temperature and Pressure on Density of Oil Based Drilling Fluids and the Mathematical Model Thereof

YANG Lanping; LI Zhiqiang; NIE Qiangyong; LIANG Yi; JIANG Guancheng

doi:10.12358/j.issn.1001-5620.2022.02.004

Volume 39 Issue 2

Jun. 2022

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > DRILLING FLUID & COMPLETION FLUID > 2022 > 39(2): 151-157

YANG Lanping, LI Zhiqiang, NIE Qiangyong, et al.Study on effects of temperature and pressure on density of oil based drilling fluids and the mathematical model thereof[J]. Drilling Fluid & Completion Fluid，2022, 39（2）：151-157 doi: 10.12358/j.issn.1001-5620.2022.02.004

Citation:

YANG Lanping, LI Zhiqiang, NIE Qiangyong, et al.Study on effects of temperature and pressure on density of oil based drilling fluids and the mathematical model thereof[J]. Drilling Fluid & Completion Fluid，2022, 39（2）：151-157 doi: 10.12358/j.issn.1001-5620.2022.02.004

Citation:

PDF( 2922 KB)

Study on Effects of Temperature and Pressure on Density of Oil Based Drilling Fluids and the Mathematical Model Thereof

doi: 10.12358/j.issn.1001-5620.2022.02.004

1.
CCDC Drilling Fluid Technology Services Company, Chengdu, Sichuan 610051
2.
State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum (Beijing), Beijing 102249
3.
MOE Key Laboratory of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249

Received Date: 2021-10-10
Accepted Date: 2022-01-15
Rev Recd Date: 2021-12-18
Publish Date: 2022-06-23

Abstract

Abstract

The density of oil based drilling fluids is significantly affected by temperature and pressure. Understanding the change of the density of oil based drilling fluids is of importance to the safety of the drilling operation. Oil based drilling fluids of 4 different densities with the same composition copied from the composition of a field drilling fluid were formulated in laboratory and were tested for the change of density with an HTHP density balance made by Anton Paar Company in temperature range of 60 – 220 ℃ and pressure range of 20 – 120 MPa. Using the teste results, the effects of temperature and pressure on the density of the oil based drilling fluids were investigated, and a temperature-pressure binary mathematical model about the density of oil based drilling fluid was established. The accuracy of the model was verified with field oil based drilling fluids of different densities, and it was found that the values predicted with the model and the values measured agreed closely with each other, the average prediction accuracy of the model is up to 97.93%, meaning that the model is able to satisfy the needs of field application. Verification of the model on another two oil based drilling fluids with similar composition showed an average error of 9.24%, indicating a high prediction accuracy.
- Oil based drilling fluid,
- Temperature,
- Pressure,
- Density,
- Prediction

FullText(HTML)

References(17)

References

[1]	罗绪武,赵雄虎,余加水,等. 生物柴油包水钻井液体系[J]. 钻井液与完井液,2020,37(6):721-725. doi: 10.3969/j.issn.1001-5620.2020.06.007 LUO Xuwu, ZHAO Xionghu, YU Jiashui, et al. Laboratory study on water in oil drilling fluid formulated with biodiesel oil[J]. Drilling Fluid & Completion Fluid, 2020, 37(6):721-725. doi: 10.3969/j.issn.1001-5620.2020.06.007
[2]	潘谊党,于培志. 密度对油基钻井液性能的影响[J]. 钻井液与完井液,2019,36(3):273-279. doi: 10.3969/j.issn.1001-5620.2019.03.002 PAN Yidang, YU Peizhi. Effect of density on the performance of oil base drilling fluids[J]. Drilling Fluid & Completion Fluid, 2019, 36(3):273-279. doi: 10.3969/j.issn.1001-5620.2019.03.002
[3]	邱正松,赵冲,张现斌,等. 超高温高密度油基钻井液研究与性能评价[J]. 钻井液与完井液,2021,38(6):663-670. QIU Zhengsong, ZHAO Chong, ZHANG Xianbin, et al. Study and performance evaluation of ultra-high temperature high density oil based drilling fluids[J]. Drilling Fluid & Completion Fluid, 2021, 38(6):663-670.
[4]	王骁男. 塔河油田二叠系井壁失稳机理及防塌强抑制钻井液体系研究[D]. 中国地质大学(北京), 2019. WANG Xiaonan. Study on the instability mechanism of permian borehole in Tahe oilfield and drilling fluid system with strong suppression for collapse[D]. China University of Geosciences (Beijing) , 2019.
[5]	谢春林,杨丽丽,蒋官澄,等. 高温高压耦合条件下油基钻井液的流变特性规律及其数学模型[J]. 钻井液与完井液,2021,38(5):568-575. XIE Chunlin, YANG Lili, JIANG Guancheng, et al. Rheological characteristics of oil base drilling fluids and its mathematical model under coupled hthp conditions[J]. Drilling Fluid & Completion Fluid, 2021, 38(5):568-575.
[6]	王敏生,易灿,徐加放. 高温高压对超深井钻井液密度的影响[J]. 石油钻采工艺,2007,29(5):85-87. doi: 10.3969/j.issn.1000-7393.2007.05.024 WANG Minsheng, YI Can, XU Jiafang. Effects on high temperature and pressure density[J]. Oil Drilling & Production Technology, 2007, 29(5):85-87. doi: 10.3969/j.issn.1000-7393.2007.05.024
[7]	李旭,任胜利,刘文成,等. 钻井流体液相组分密度的温度压力修正模型[J]. 钻井液与完井液,2020,37(2):168-173. doi: 10.3969/j.issn.1001-5620.2020.02.006 LI Xu, REN Shengli, LIU Wencheng, et al. Study on temperature and pressure correction model for predicting liquid phase density of drilling fluids[J]. Drilling Fluid & Completion Fluid, 2020, 37(2):168-173. doi: 10.3969/j.issn.1001-5620.2020.02.006
[8]	汪海阁,刘岩生,杨立平. 高温高压井中温度和压力对钻井液密度的影响[J]. 钻采工艺,2000,23(1):56-60. doi: 10.3969/j.issn.1006-768X.2000.01.016 WANG Haige, LIU Yansheng, YANG Liping. Effect of temperature and pressure on drilling fluid density in HTHP wells[J]. Drilling & Production Technology, 2000, 23(1):56-60. doi: 10.3969/j.issn.1006-768X.2000.01.016
[9]	BARKLM, CUNHA J C. Olefin-based synthetic-drilling-fluid volumetric behavior under downhole condition[R]. SPE 108159, 2009.
[10]	宋晓雪. 密度等因素对油基钻井液性能的影响情况研究[J]. 西部探矿工程,2021,33(4):59-61. doi: 10.3969/j.issn.1004-5716.2021.04.019 SONG Xiaoxue. Study on influence of density and other factors on the performance of oil-based drilling fluids[J]. West-China Exploration Engineering, 2021, 33(4):59-61. doi: 10.3969/j.issn.1004-5716.2021.04.019
[11]	MCMORDIE Jr W C, BLAND R G, HAUDER J M. Effort of temperature and pressure on the density of drilling fluid[R]. SPE 11114, 1982.
[12]	赵胜英,鄢捷年,舒勇,等. 油基钻井液高温高压流变参数预测模型[J]. 石油学报,2009,30(4):603-606. doi: 10.3321/j.issn:0253-2697.2009.04.023 ZHAO Shengying, YAN Jienian, SHU Yong, et al. Prediction model for rheological parameters of oil-based drilling fluids at high temperature and high pressure[J]. Acta Petrolei Sinica, 2009, 30(4):603-606. doi: 10.3321/j.issn:0253-2697.2009.04.023
[13]	管志川. 温度和压力对深水钻井油基钻井液液柱压力的影响[J]. 石油大学学报(自然科学版),2003,27(4):48-52,57. GUAN Zhichuan. Effect of temperature and pressure on fluid column pressure of wellbore drilling fluid in deep-water drilling with oil-based drilling fluid[J]. Journal of China University of Petroleum(Edition of Natural Science), 2003, 27(4):48-52,57.
[14]	唐明月. 油基钻井液在高温高压下的密度预测——基于自适应极限学习机模型[J]. 新疆石油天然气,2019,15(2):40-43. doi: 10.3969/j.issn.1673-2677.2019.02.009 TANG Mingyue. Prediction of oil-based drilling fluid density under high temperature and pressure——based on adaptive limit learning machine model[J]. Xinjiang Oil & Gas, 2019, 15(2):40-43. doi: 10.3969/j.issn.1673-2677.2019.02.009
[15]	王富华, 王瑞和, 王力, 等. 深井水基钻井液流变性影响因素的实验研究[J]. 钻井液与完井液, 2010, 27（1）: 17-20. WANG Fuhua, WANG Ruihe, WANG Li, et al. Experimental research on the influencing factors of rheology of deep well water-based drilling fluid[J]. Drilling Fluid & Completion Fluid, 2010, 27(1):17-20.
[16]	鄢捷年, 李志勇, 张金波. 深井油基钻井液在高温高压下表观粘度和密度的快速预测方法[J]. 石油钻探技术, 2005, 33（5）: 38-42. YAN Jienian, LI Zhiyong, ZHANG Jinbo. Methods for quickly predicting apparent viscosity and density of oilbased drilling fluids under HTHP conditions[J]. Petroleum Drilling Techniques, 2005, 33（5）: 38-42.
[17]	罗宇维, 朱江林, 李东, 等. 温度和压力对井内流体密度的影响[J]. 石油钻探技术, 2012, 40（2）: 30-34. LUO Yuwei, ZHU Jianglin, LI Dong, et al. The impact of temperature and pressure on borehole fluids density[J]. Petroleum Drilling Techniques, 2012, 40（2）: 30-34.

Relative Articles

[1]	SHI He, SHI Haimin, NI Xiaoxiao, CHENG Rongchao, ZHANG Jiaqi, WANG Jianhua, YAN Lili. Study on Rheological Modifier of High Temperature High Density Clay-free Oil-based Drilling Fluid[J]. DRILLING FLUID & COMPLETION FLUID, 2022, 39(1): 8-14. doi: 10.12358/j.issn.1001-5620.2022.01.002
[2]	YOU Fuchang, WEN Hua, WU Jiao, ZHANG Ya. High Density Clay-free Oil Based Drilling Fluid[J]. DRILLING FLUID & COMPLETION FLUID, 2022, 39(2): 146-150. doi: 10.12358/j.issn.1001-5620.2022.02.003
[3]	LIU Yongfeng, ZHANG Weiguo, DI Mingli, CHEN Bin, ZUO Kun, WANG Shunwen, KE Dian. An Environmentally Friendly Oil Base Mud[J]. DRILLING FLUID & COMPLETION FLUID, 2021, 38(4): 449-455. doi: 10.3969/j.issn.1001-5620.2021.04.008
[4]	QIU Zhengsong, ZHAO Chong, ZHANG Xianbin, ZHANG Jian, ZHAO Ying, CHEN Anliang, YANG Zhongfeng. Study and Performance Evaluation of Ultra-High Temperature High Density Oil Based Drilling Fluids[J]. DRILLING FLUID & COMPLETION FLUID, 2021, 38(6): 663-670. doi: 10.12358/j.issn.1001-5620.2021.06.001
[5]	DENG Rong, LIU Jianping, LUO Minmin, ZHANG Jiayu, HUANG Anlong. Effects of Drilling Fluid Soaking on Surface Morphology of Rocks at Different Temperatures[J]. DRILLING FLUID & COMPLETION FLUID, 2021, 38(6): 691-697. doi: 10.12358/j.issn.1001-5620.2021.06.005
[6]	WU Xiongjun, LIN Yongxue, SONG Bitao, JIN Junbin, DONG Xiaoqiang. Oil Base Drilling Fluid Technology for Drilling Broken Ordovician Formation in Shunbei Block[J]. DRILLING FLUID & COMPLETION FLUID, 2020, 37(6): 701-708. doi: 10.3969/j.issn.1001-5620.2020.06.004
[7]	LU Yunhu, XIAO Xianheng, ZHAO Lin, JIN Yan, CHEN Mian. The Effect of Temperature on Stability of Borehole Wall in Ultra-Deep Fractured Formation[J]. DRILLING FLUID & COMPLETION FLUID, 2020, 37(2): 160-167. doi: 10.3969/j.issn.1001-5620.2020.02.005
[8]	ZHAO Wen, SUN Qiang, ZHANG Heng. Application of a High Temperature High Density Oil Base Drilling Fluid in Well Dabei-12X in Tarim Oilfield[J]. DRILLING FLUID & COMPLETION FLUID, 2020, 37(6): 709-714,720. doi: 10.3969/j.issn.1001-5620.2020.06.005
[9]	LIU Zheng, LI Juncai, XU Xinniu. Evaluation and Field Application of Weighting Agents for Ultra-High Density Oil Base Drilling Fluids[J]. DRILLING FLUID & COMPLETION FLUID, 2020, 37(6): 715-720. doi: 10.3969/j.issn.1001-5620.2020.06.006
[10]	LI Xu, REN Shengli, LIU Wencheng, ZHAO Danhui, LIAO Maolin, LIN Liming. Study on Temperature and Pressure Correction Model for Predicting Liquid Phase Density of Drilling Fluids[J]. DRILLING FLUID & COMPLETION FLUID, 2020, 37(2): 168-173. doi: 10.3969/j.issn.1001-5620.2020.02.006
[11]	ZHANG Jiaqi, WANG Jianhua, WEI Fengqi, YAN Lili. Calculation of Harmful Low Density Solids Content in Oil Base Drilling Fluids Using Linear Regression Method[J]. DRILLING FLUID & COMPLETION FLUID, 2019, 36(5): 560-563. doi: 10.3969/j.issn.1001-5620.2019.05.006
[12]	PAN Yidang, YU Peizhi. Effect of Density on the Performance of Oil Base Drilling Fluids[J]. DRILLING FLUID & COMPLETION FLUID, 2019, 36(3): 273-279. doi: 10.3969/j.issn.1001-5620.2019.03.002
[13]	WANG Shuyi, XU Mingbiao, YOU Fuchang, DENG Cong, WANG Hangzhi. A Laboratory Test Method for Predicting Mud Ball Generation in Drilling Fluids[J]. DRILLING FLUID & COMPLETION FLUID, 2019, 36(5): 600-604. doi: 10.3969/j.issn.1001-5620.2019.05.013
[14]	AI Zhengqing, ZHANG Feng, DING Hui, SU Donghua, LI Wei, ZHANG Xingguo. Effects of Temperature on Mechanical Property of Set Cement and Analysis Thereof[J]. DRILLING FLUID & COMPLETION FLUID, 2018, 35(4): 77-81. doi: 10.3969/j.issn.1001-5620.2018.04.014
[15]	LUO Yunfeng, LIU Baoshuang, WANG Zhongjie, LAN Qiang. A Dual-Pressure Vibrating Tube Type Device for Mud Density Measurement[J]. DRILLING FLUID & COMPLETION FLUID, 2018, 35(1): 42-46. doi: 10.3969/j.issn.1001-5620.2018.01.008
[16]	XU Bihua, FENG Qinghao, XIE Yingquan, YANG Yuhao. A Method of Calculating Rheology of Cement Slurry Affected by Circulation Temperature[J]. DRILLING FLUID & COMPLETION FLUID, 2017, 34(6): 79-82. doi: 10.3969/j.issn.1001-5620.2017.06.015
[17]	LI Huaike, LIU Weili. Study on Effects of Temperature on Coefficient of Heat Conductivity of Saltwater[J]. DRILLING FLUID & COMPLETION FLUID, 2017, 34(5): 54-57. doi: 10.3969/j.issn.1001-5620.2017.05.010
[18]	WANG Can, SUN Xiaojie, QIU Zhengsong, LIU Junyi, HUANG Daquan, ZHANG Xianbin, Pu Dan. Experimental Study on Oil Base Mud Loss Control with Gel LCM[J]. DRILLING FLUID & COMPLETION FLUID, 2016, 33(6): 40-44. doi: 10.3969/j.issn.1001-5620.2016.06.007
[19]	QIN Yong, JIANG Guancheng, DENG Zhengqiang, QIN Zonglun. Development of Polyester Gel Strength Enhancer and High Density Oil Base Drilling Fluid[J]. DRILLING FLUID & COMPLETION FLUID, 2015, 32(6): 1-4. doi: 10.3969/j.issn.1001-5620.2015.06.001

Supplements(0)

Cited By

Cited by

Periodical cited type(5)

1.	张政，袁健鹏，马蠡，王国荣，钟林. 地热井钻井过程中钻井液热物理性质对井筒温度压力的影响. 科学技术与工程. 2025(07): 2767-2775 .
2.	肖东，李炫锟，唐贵，杨应强，陈昭希，刘亚川. 基于分流工具的大差异环空井筒流动模型. 科学技术与工程. 2025(13): 5560-5570 .
3.	周文龙，荣传新，程桦，王宗金，姚直书. 白垩侏罗系地层钻井法凿井钻井液黏度突变致因分析. 建井技术. 2024(01): 56-64 .
4.	王长豹，程云，马诚，杨超，钟飞升，杨国兴. 裂缝性地层油基钻井液用堵漏材料的研究进展. 当代化工. 2024(11): 2621-2627 .
5.	廖星奥，李军，杨宏伟，柳贡慧，刘伟，李牧，廖茂林. 井筒温压场下微型测量器运移模型及校正研究. 石油机械. 2023(06): 27-35 .

Other cited types(2)

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(5) / Tables(8)

Get Citation

PDF

XML

Article Metrics

Article views (1099) PDF downloads(191)

Study on Effects of Temperature and Pressure on Density of Oil Based Drilling Fluids and the Mathematical Model Thereof

doi: 10.12358/j.issn.1001-5620.2022.02.004