Volume 33 Issue 1
Jan.  2016
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2016  >  33(1): 6-10
QIN Yong, JIANG Guancheng, DENG Zhengqiang, GE Lian. Synthesis and Evaluation of A Primary Emulsifier for High Temperature Oil Base Drilling Fluid[J]. DRILLING FLUID & COMPLETION FLUID, 2016, 33(1): 6-10. doi: 10.3969/j.issn.1001-5620.2016.01.002
Citation: QIN Yong, JIANG Guancheng, DENG Zhengqiang, GE Lian. Synthesis and Evaluation of A Primary Emulsifier for High Temperature Oil Base Drilling Fluid[J]. DRILLING FLUID & COMPLETION FLUID, 2016, 33(1): 6-10. doi: 10.3969/j.issn.1001-5620.2016.01.002
shu

Synthesis and Evaluation of A Primary Emulsifier for High Temperature Oil Base Drilling Fluid

doi: 10.3969/j.issn.1001-5620.2016.01.002
  • 1.

    Drilling Fluid Service of CNPC Chuanqing Drilling Engineering Company Ltd., Chengdu Sichuan 610051, China

  • 2. China University of Petroleum-Beijing, Beijing 102200, China

  • Received Date: 2015-10-09
  • Publish Date: 2016-01-30
    Abstract
  • A primary emulsifier, HT-MUL, for high temperature oil base drilling fluid was developed using tall oil fatty acids and maleic anhydride, and the optimum acid value of tall oil fatty acids and optimum concentration of maleic anhydride for the reaction were determined. Evaluation of HT-MUL shows that HT-MUL performs very well as an emulsifier. Using HT-MUL, a water-in-oil emulsion (O/W ratio=60:40) was formulated, having electrical stability of 490 V, and another water-in-oil emulsion (O/W ratio=90:10), having electrical stability of 1,000 V. Comparison of HT-MUL with other primary emulsifiers demonstrates that emulsions formulated with HT-MUL have higher electrical stability voltage, lower filter loss and higher rate of emulsion, proving that HT-MUL has better general performance than other emulsifiers. A high performance high density oil base drilling fluid was formulated using HT-MUL, retaining electrical stability of 800 V and filter loss less than 5 mL after hot rolling at 220℃. Oil base drilling fluids formulated with HT-MUL have good high temperature performance and emulsion stability.

     

    • FullText(HTML)
  • loading
    • References(9)
  • 鄢捷年. 钻井液工艺学[M]. 石油大学出版社,2012:89-110. Yan Jienian. Drilling fluid technology[M]. University of petroleum press,2012:89-110.
    王中华. 国内外油基钻井液研究与应用进展[J]. 断块油气田,2011,18(4):533-537. Wang Zhonghua. The domestic and foreign research and application progress of oil-base drilling fluid[J]. Fault-Block Oil & Gas Field, 2011,18(4):533-537.
    何涛,李茂森,杨兰平,等. 油基钻井液在威远地区页岩气水平井中的应用[J]. 钻井液与完井液,2012, 29(3):1-5. He Tao, Li Maosen, Yang Lanping,et al. The application of oil-base drilling fluid for Shale gas horizontal well in Weiyuan region[J]. Drilling Fluid & Completion Fluid, 2012,29(3):1-5.
    王旭东, 郭保雨, 张海青, 等. 抗高温油包水型乳化剂的研制与应用[J]. 钻井液与完井液,2013,30(4):9-12. Wang Xudong, Guo Baoyu, Zhang Haiqing, et al. Development and application of water-in-oil type emulsifier for high temperature[J]. Drilling Fluid & Completion Fluid, 2013,30(4):9-12.
    刘明华,张滨,王阳,等. 油基钻井液用粉状乳化剂性能评价[J]. 钻井液与完井液,2015,32(5):7-9. Liu Minghua, Zhang Bin, Wang Yang,et al. The performance evaluation of the powder emulsifier in the oil-base drilling fluid[J]. Drilling Fluid & Completion Fluid, 2015, 32(5):7-9.
    田松柏, 马秀艳.石油及石油产品酸值测定方法的比较[J]. 石油炼制与化工,2002,33(12):49-53. Tian Songbai, Ma Xiuyan. The comparison of measurement for acid value in oil and oil products[J]. Petroleum processing and petrochemicals, 2002,33(12):49-53.
    王卫红. 原油酸值测定的探讨[J]. 河南化工,2008, 25(3):44-47. Wang Weihong. The discussion and measurement of acid value for crude oil[J]. Henan Chemical Industry, 2008, 25(3):44-47.
    王茂功,徐显广,苑旭波. 抗高温气制油基钻井液用乳化剂的研制和性能评价[J]. 钻井液与完井液,2012, 29(6):4-5, 9. Wang Maogong, Xu Xianguang, Yuan Xubo. The development and performance evaluation of the gas oilbase drilling fluid emulsifier for high temperature[J]. Drilling Fluid & Completion Fluid, 2012,29(6):4-5, 9.
    刘扣其,邱正松,曹杰,等. 油基钻井液流变参数影响因素探讨[J]. 西安石油大学学报(自然科学版), 2014,29(2):78-83. Liu Kouqi, Qiu Zhengsong, Cao Jie,et al. The exploring of influencing factors for reheological parameter in oil-based drilling fluid[J]. Journal of Xi'an Petroleum University(Natural Science Column), 2014,29(2):78-83.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (2105) PDF downloads(597) Cited by()
    Proportional views
    Related

    Copyright 《Drilling Fluid & Completion Fluid》津ICP备13002319号-1

    Address：Editorial Department of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei ProvinceChina Pos：062552

    Tel：（0317）2725487　2722354Email：zjyywjy@126.com

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return