| Citation: | LI Huaike, WANG Zhiyong, ZHANG Yufei, et al.A comb polymer for dispersing micro-manganese weighting material[J]. Drilling Fluid & Completion Fluid,2025, 42(6):829-835 doi: 10.12358/j.issn.1001-5620.2025.06.016 |
| [1] |
张晖, 蒋绍宾, 袁学芳, 等. 微锰加重剂在钻井液中的应用[J]. 钻井液与完井液, 2018, 35(1): 1-7.
ZHANG Hui, JIANG Shaobin, YUAN Xuefang, et al. Application of micro powder manganese weighting agent in drill-in fluids[J]. Drilling Fluid & Completion Fluid, 2018, 35(1): 1-7.
|
| [2] |
潘谊党, 于培志, 马京缘. 高密度钻井液加重材料沉降问题研究进展[J]. 钻井液与完井液, 2019, 36(1): 1-9.
PAN Yidang, YU Peizhi, MA Jingyuan. Progresses in research on settling of weighting materials in high density drilling fluids[J]. Drilling Fluid & Completion Fluid, 2019, 36(1): 1-9.
|
| [3] |
刘锋报, 武星星, 徐同台, 等. 微锰加重剂减轻钻井液对油气层损害研究的新进展[J]. 钻井液与完井液, 2020, 37(6): 677-684.
LIU Fengbao, WU Xingxing, XU Tongtai, et al. New progresses made in the study of minimizing damage to oil and gas reservoirs with micronized manganese ore weighting agent[J]. Drilling Fluid & Completion Fluid, 2020, 37(6): 677-684.
|
| [4] |
白龙, 王骁男, 闫永生. 微锰在高密度水基钻井液中加重性能分析[J]. 内蒙古石油化工, 2019, 45(8): 34-40.
BAI Long, WANG Xiaonan, YAN Yongsheng. Analysis of weighting performance of micro-manganese in high density water-based drilling fluids[J]. Inner Mongolia Petrochemical Industry, 2019, 45(8): 34-40.
|
| [5] |
任亮亮, 陈晨, 李超, 等. 加重材料对抗高温高密度合成基钻井液性能的影响[J]. 钻井液与完井液, 2023, 40(5): 551-555.
REN Liangliang, CHEN Chen, LI Chao, et al. Effect of weighting materials on the properties of synthetic-based drilling fluids[J]. Drilling Fluid & Completion Fluid, 2023, 40(5): 551-555.
|
| [6] |
刘玉林. 微锰加重剂在高密度油基钻井液中的作用评价[J]. 化学工程师, 2018, 32(5): 52-54.
LIU Yulin. Evaluation of effect of micro-manganese aggravating agent in high density oil based drilling fluid[J]. Chemical Engineer, 2018, 32(5): 52-54.
|
| [7] |
潘谊党. 抗高温高密度水基钻井液体系研究[D]. 北京: 中国地质大学, 2020.
PAN Yidang. Research on high temperature and high density water based drilling fluid[D]. Beijing: China University of Geosciences, 2020.
|
| [8] |
陈晓非, 陈娟娟, 娄刚, 等. MA/SAS/AMPS共聚物耐高温钻井液降黏剂的研制[J]. 化工科技, 2014, 22(2): 38-41.
CHEN Xiaofei, CHEN Juanjuan, LOU Gang, et al. Study on MA/SAS/AMPS copolymer high temperature thinner for drilling fluid[J]. Science & Technology in Chemical Industry, 2014, 22(2): 38-41.
|
| [9] |
刘立新, 杜俊涛, 刘顺平, 等. 耐高温钻井液降黏剂St/AMPS/AA的研制[J]. 钻井液与完井液, 2012, 29(2): 18-20.
LIU Lixin, DU Juntao, LIU Shunping, et al. Research on high temperature drilling fluid thinner St/AMPS/AA[J]. Drilling Fluid & Completion Fluid, 2012, 29(2): 18-20.
|
| [10] |
KAR Y, AL MOAJIL A. M, NASR-EI-DIN H, et al. Environmentally friendly dispersants for HP/HT aqueous drilling fluids containing Mn3O4, contaminated with cement, rock salt, and clay[C]//Paper presented at the SPE Middle East Oil and Gas Show and Conference. Manama, Bahrain: SPE, 2011: SPE-141957-MS.
|
| [11] |
REHMAN A, MOAJIL A M, NASR-EL-DIN H A, et al. Environmentally friendly dispersants for high temperature Invert-Emulsion drilling fluids weighted by manganese tetraoxide[C]//Paper presented at the SPE Latin America and Caribbean Petroleum Engineering Conference, Mexico City, Mexico: SPE, 2012: SPE-153646-MS.
|
| [12] |
WANG A Q, QIAO M, XU J, et al. Erratum: POEGMA-b-PAA comb-like polymer dispersant for Al2 suspensions[J]. Journal of Applied Polymer Science, 2016, 133(25): 133.
|
| [13] |
WHITBY C P, SCALES P J, GRIESER F, et al. PAA/PEO comb polymer effects on rheological properties and interparticle forces in aqueous silica suspensions[J]. Journal of Colloid and Interface Science, 2003, 262(1): 274-281. doi: 10.1016/S0021-9797(03)00179-6
|
| [14] |
GUPTA P, MUNDRA R, JHA S K. Stabilization of Al2O3 dispersed slurry by controlling pH, colloids and surfaces a: physicochemical and engineering aspects[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2024, 685: 133251. doi: 10.1016/j.colsurfa.2024.133251
|
| [15] |
KIRBY G H, HARRIS D J, LI Q, et al. Poly(acrylic acid)-poly(ethylene oxide) comb polymer effects on BaTiO3 nanoparticle suspension stability[J]. Journal of the American Ceramic Society, 2004, 87(2): 181-186. doi: 10.1111/j.1551-2916.2004.00181.x
|