Volume 40 Issue 1
Jan.  2023
Turn off MathJax
Article Contents
LI Chao, DI Wenwen, GENG Tie, et al.A Pickering emulsion oil based drilling fluid[J]. Drilling Fluid & Completion Fluid,2023, 40(1):28-34 doi: 10.12358/j.issn.1001-5620.2023.01.003
Citation: LI Chao, DI Wenwen, GENG Tie, et al.A Pickering emulsion oil based drilling fluid[J]. Drilling Fluid & Completion Fluid,2023, 40(1):28-34 doi: 10.12358/j.issn.1001-5620.2023.01.003

A Pickering Emulsion Oil Based Drilling Fluid

doi: 10.12358/j.issn.1001-5620.2023.01.003
  • Received Date: 2022-09-03
  • Rev Recd Date: 2022-10-12
  • Publish Date: 2023-01-31
  • In a Pickering emulsion, the solid particle emulsifier is absorbed at the interface between oil and water, forming a stable interfacial film to prevent the coalescence of water droplets. This property can be used to improve the stability of oil based drilling fluids. However, in studies on the oil based drilling fluids based on Pickering emulsion, the interaction between a water droplet in the oil phase and an inorganic hydrophilic particle has been omitted; the effects of inorganic particles added to an oil based drilling fluid, such as calcium hydroxide, weighting agents and the drilled cuttings, on the existence of the water droplets in the emulsion are not considered. In laboratory study, calcium hydroxide, barite and kaolinite particles of different hydrating capacities were added into a W/O Pickering emulsion. Macro sedimentation experiment and microscope observation with microscopic images have proved that the water droplets are combined with the solid particles, existing in a form of bound water. This explains the aggregation of the solid particles. The bound water was characterized with laser confocal microscope and low temperature differential scanning calorimetry. The solid particles with bound water can be dispersed by treating the system with a dispersant, in this way the stability of the drilling fluid can be improved. An oil based drilling fluid based on W/O Pickering emulsion is not a water-in-oil (W/O) drilling fluid, it is, however, a system in which the bound water droplets are moderately dispersed into an oil phase. In addition, low temperature constant rheology can be achieved by adjusting the rheology of a low density oil based drilling fluid.

     

  • loading
  • [1]
    FU Lipei, MA Qianli, LIAO Kaili, et al. Application of Pickering emulsion in oil drilling and production[J]. Nanotechnology Reviews, 2022, 11(1):26-39.
    [2]
    DARGAHI-ZABOLI M, SAHRAEI E, POURABBAS B. Hydrophobic silica nanoparticle-stabilized invert emulsion as drilling fluid for deep drilling[J]. Petroleum Science, 2017, 14(1):105-115. doi: 10.1007/s12182-016-0135-0
    [3]
    DARGAHI-ZABOLI M, SAHRAEI E, POURABBAS B, et al. A simplified synthesis of silica Colloids with tunable hydrophobicity[J]. Colloid and Polymer Science, 2017, 295(5):925-932. doi: 10.1007/s00396-017-4079-8
    [4]
    GHOSN R, MIHELIC F, HOCHEPIED J F, et al. Silica nanoparticles for the stabilization of W/O emulsions at HTHP conditions for unconventional reserves drilling operations[J]. Oil & Gas Science and Technology, 2017, 72(4):21.
    [5]
    AGARWAL S, PHUOC T X, SOONG Y, et al. Nanoparticle-stabilised invert emulsion drilling fluids for deep-hole drilling of oil and gas[J]. The Canadian Journal of Chemical Engineering, 2013, 91(10):1641-1649. doi: 10.1002/cjce.21768
    [6]
    艾加伟,庞敏,陈馥,等. DSW-S纳米颗粒对油基钻井液的稳定作用[J]. 油田化学,2016,33(1):5-8.

    AI Jiawei, PANG Min, CHEN Fu, et al. Effect of DSW-S nanoparticle on the stability of oil-based drilling fluid[J]. Oilfield Chemistry, 2016, 33(1):5-8.
    [7]
    罗陶涛,段敏,杨刚. 基于Pickering乳状液的油基钻井液乳化稳定性能研究[J]. 钻采工艺,2015,38(1):99-101.

    LUO Taotao, DUAN Min, YANG Gang. Research on oil-based drilling fluid emulsion stability based on pickering emulsion[J]. Drilling & Production Technology, 2015, 38(1):99-101.
    [8]
    罗陶涛,欧阳伟,苏志刚. 原位活化纳米材料提高油基钻井液乳化稳定性研究[J]. 钻井液与完井液,2014,31(4):5-7.

    LUO Taotao, OUTYANG Wei, SU Zhigang. Study on the emulsion stability of oil-base drilling fluid treated with in-situ activation nano material[J]. Drilling Fluid & Completion Fluid, 2014, 31(4):5-7.
    [9]
    DI Wenwen, ZHAO Chunhua, SUN Dejun, et al. Probing the state of water in oil-based drilling fluids[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022, 651:129770.
    [10]
    KOLOTOVA D, BRICHKA K, SIMONSEN G, et al. Droplet crystallization in water-in-crude oil emulsions: Influence of salinity and droplet size[J]. Energy & Fuels, 2017, 31(7):7673-7681.
    [11]
    HUANG Qunxing, MAO Feiyan, HAN Xu, et al. Characterization of emulsified water in petroleum sludge[J]. Fuel, 2014, 118:214-219.
    [12]
    YANG Jia, QIU Chaoying, LI Gyanghui, et al. Effect of diacylglycerol interfacial crystallization on the physical stability of water-in-oil emulsions[J]. Food Chemistry, 2020, 327:127014.
    [13]
    GHOSH S, TRAN T, ROUSSEAU D. Comparison of Pickering and network stabilization in water-in-oil emulsions. Langmuir, 2011, 27(11): 6589-6597.
    [14]
    GHOSH S, ROUSSEAU D. Freeze–thaw stability of water-in-oil emulsions[J]. Journal of Colloid and Interface Science, 2009, 339(1):91-102.
    [15]
    CLAUSSE D, GOMEZ F, PEZRON I, et al. Morphology characterization of emulsions by differential scanning calorimetry[J]. Advances in Colloid and Interface Science, 2005, 117(1):59-74.
    [16]
    CLAUSSE D, FOUCONNIER B, GOMEZ J A. Ripening phenomena in emulsions — A calorimetry investigation[J]. Journal of Dispersion Science and Technology, 2002, 23(1–3):379-391.
    [17]
    CLAUSSE D, GOMEZ F, DALMAZZONE C, et al. A method for the characterization of emulsions, thermogranulometry: Application to water-in-crude oil emulsion[J]. Journal of Colloid and Interface Science, 2005, 287(2):694-703.
    [18]
    TAKAMUKU T, YAMAGAMI M, WAKITA H, et al. Thermal property, structure, and dynamics of supercooled water in porous silica by calorimetry, neutron scattering, and NMR relaxation[J]. The Journal of Physical Chemistry B, 1997, 101(29):5730-5739.
    [19]
    ALCOUTLABI M, MCKENNA G B. Effects of confinement on material behaviour at the nanometre size scale[J]. Journal of Physics: Condensed Matter, 2005, 17(15):461-524.
    [20]
    李兵. 现场油基钻井液固相粒度评价新方法[J]. 钻井液与完井液,2022,39(2):190-193.

    LI Bing. A new method for on-site PSD evaluation of oil based mud[J]. Drilling Fluid & Completion Fluid, 2022, 39(2):190-193.
    [21]
    由福昌,文华,吴娇,等. 高密度无土相油基钻井液[J]. 钻井液与完井液,2022,39(2):146-150.

    YOU Fuchang, WEN Hua, WU Jiao, et al. High density clay-free oil based drilling fluid[J]. Drilling Fluid & Completion Fluid, 2022, 39(2):146-150.
    [22]
    张立新,刘瑞. 高密度油基钻井液在阳101H3-6井长水平段的应用[J]. 钻探工程,2021,48(7):79-83.

    ZHANG Lixin, LIU Rui. Application of high-density oil-based drilling fluid in the long horizontal section of Well Yang 101H3-6[J]. Drilling Engineering, 2021, 48(7):79-83.
    [23]
    范胜,周书胜,方俊伟,等. 高温低密度油基钻井液体系室内研究[J]. 钻井液与完井液,2020,37(5):561-565.

    FAN Sheng, ZHOU Shusheng, FANG Junwei,et al. Laboratory study on high temperature low density oil base drilling fluid[J]. Drilling Fluid & Completion Fluid, 2020, 37(5):561-565.
    [24]
    骆小虎. 油基钻井液用有机土标准现状与探讨[J]. 钻井液与完井液,2020,37(5):566-571.

    LUO Xiaohu. The Status quo of the standards of organophilic clays for oil base drilling fluids and discussion thereof[J]. Drilling Fluid & Completion Fluid, 2020, 37(5):566-571.
    [25]
    史赫,史海民,倪晓骁,等. 一种抗高温高密度无土相油基钻井液提切剂[J]. 钻井液与完井液,2022,39(1):8-14.

    SHI He, SHI Haimin, NI Xiaoxiao, et al. Study on rheological modifier of high temperature high density clay-free oil-based drilling fluid[J]. Drilling Fluid & Completion Fluid, 2022, 39(1):8-14.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(11)  / Tables(2)

    Article Metrics

    Article views (685) PDF downloads(109) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return