Volume 39 Issue 4
Jul.  2022
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2022  >  39(4): 397-405
HUANG Ning, LYU Kaihe, SUN Jinsheng, et al.Research status-quo and development trend of gel strength additives for oil based drilling fluids[J]. Drilling Fluid & Completion Fluid，2022, 39（4）：397-405 doi: 10.12358/j.issn.1001-5620.2022.04.001
Citation: HUANG Ning, LYU Kaihe, SUN Jinsheng, et al.Research status-quo and development trend of gel strength additives for oil based drilling fluids[J]. Drilling Fluid & Completion Fluid，2022, 39（4）：397-405 doi: 10.12358/j.issn.1001-5620.2022.04.001
shu

Research Status-Quo and Development Trend of Gel Strength Additives for Oil Based Drilling Fluids

doi: 10.12358/j.issn.1001-5620.2022.04.001
  • 1.

    College of Petroleum Engineering, China University of Petroleum(East China), Qingdao, Shandong 266580

  • 2.

    CNPC Engineering Technology R&D Company Limited, Beijing 102206

  • Received Date: 2022-02-18
  • Rev Recd Date: 2022-04-05
  • Publish Date: 2022-07-30
    Abstract
  • The rheology of an oil based drilling fluid is a key factor affecting the downhole safety and penetration rate of a well. Oil based drilling fluids generally have lower gel strengths and yield point, resulting in poor sand carrying and suspending capacity of the muds. This paper describes several problems encountered in the development of gel strength additives for oil based muds, such as the difficulties in controlling the plastic viscosity, poor applicability, and poor thermal stability of the products. The research status-quo of oil based mud gel strength additives, such as organophilic clays, fatty acid amides, oil-soluble polymers as well as nanophase compound materials is systematically summarized. It is elaborated in detail that the gel strength additives for oil based muds function through hydrogen bond, coordination bond and molecular association. It is presented in this paper that to overcome the problems encountered in the development of gel strength additives for oil based muds, star polymers, dendrimers, organophilic clay modified with long-chain quaternary ammonium, as well as nanophase materials can be used to develop new gel strength additives for oil based muds.

     

    • FullText(HTML)
  • loading
    • References(42)
  • [1]
    谢建安. 超高密度油基钻井液技术在霍11井的应用[J]. 新疆石油天然气,2018,14(3):39-42. doi: 10.3969/j.issn.1673-2677.2018.03.009

    XIE Jian'an. Application of ultra-high density oil-based drilling fluid technology in Huo 11 well[J]. Xinjiang Oil & Gas, 2018, 14(3):39-42. doi: 10.3969/j.issn.1673-2677.2018.03.009
    [2]
    李辉. 白油基油包水钻井液在JHW00421井水平段的应用[J]. 新疆石油天然气,2020,16(2):38-42. doi: 10.3969/j.issn.1673-2677.2020.02.009

    LI Hui. Application of white oil-based water-in-oil drilling fluid in the horizontal section of well JHW00421[J]. Xinjiang Oil & Gas, 2020, 16(2):38-42. doi: 10.3969/j.issn.1673-2677.2020.02.009
    [3]
    黄津松,张家旗,王建华,等. 国内油基钻井液研发现状与思考[J]. 化工管理,2020(33):130-133. doi: 10.3969/j.issn.1008-4800.2020.33.064

    HUANG Jinsong, ZHANG Jiaqi, WANG Jianhua, et al. Current situation and suggestion of domestic oil-based drilling fluid[J]. Chemical Enterprise Management, 2020(33):130-133. doi: 10.3969/j.issn.1008-4800.2020.33.064
    [4]
    孙金声,黄贤斌,蒋官澄,等. 无土相油基钻井液关键处理剂研制及体系性能评价[J]. 石油勘探与开发,2018,45(4):713-718. doi: 10.11698/PED.2018.04.17

    SUN Jinsheng, HUANG Xianbin, JIANG Guancheng, et al. Development of key treatment agents for soil-free phase oil-based drilling fluids and evaluation of system performance[J]. Petroleum Exploration and Development, 2018, 45(4):713-718. doi: 10.11698/PED.2018.04.17
    [5]
    冯萍,邱正松,曹杰,等. 国外油基钻井液提切剂的研究与应用进展[J]. 钻井液与完井液,2012,29(5):84-88. doi: 10.3969/j.issn.1001-5620.2012.05.023

    FENG Ping, QIU Zhengsong, CAO Jie, et al. Research and application progress of foreign oil-based drilling fluid cutting agents[J]. Drilling Fluid & Completion Fluid, 2012, 29(5):84-88. doi: 10.3969/j.issn.1001-5620.2012.05.023
    [6]
    何振奎. 泌页HF1井油基钻井液技术[J]. 石油钻探技术,2012,40(4):32-37. doi: 10.3969/j.issn.1001-0890.2012.04.007

    HE Zhenkui. Oil-based drilling fluid technology for HF1 well[J]. Petroleum Drilling Technology, 2012, 40(4):32-37. doi: 10.3969/j.issn.1001-0890.2012.04.007
    [7]
    覃勇,蒋官澄,邓正强,等. 聚酯提切剂的研制及高密度油包水钻井液的配制[J]. 钻井液与完井液,2015,32(6):1-4.

    QIN Yong, JIANG Guancheng, DENG Zhengqiang, et al. Development of polyester lifting cutter and formulation of high-density oil-in-water drilling fluid[J]. Drilling Fluid & Completion Fluid, 2015, 32(6):1-4.
    [8]
    STEPHEN A BELL, WILLIAN W SHUMWAY. Addives for imparting fragile progressive gel structure controlled temporary viscosity to oil based drilling fluids : US, 2007/0082824 A1 [P]. 2007.
    [9]
    MA C , LI L , YANG Y P , et al. Study on the effect of polymeric rheology modifier on the rheological properties of oil-based drilling fluids[J]. Iop Conference, 2018, 292: 012106.
    [10]
    曹杰, 费东涛, 孟令伟, 等. 一种具有磷酸酯铝结构的油基钻井液用提切剂及其制备方法: 中国, CN106566490A[P]. 2017-04-19.

    CAO Jie, FEI Dongtao, MENG Lingwei, et al. An oil-based drilling fluid with aluminum phosphate ester structure and its preparation method : CN106566490A [P]. 2017-04-19.
    [11]
    LI J , YANG P , GUAN J, et al. A new type of whole oil-based drilling fluid[J]. Petroleum Exploration & Development, 2014, 41(4):538-544. doi: 10.1016/S1876-3804(14)60064-1
    [12]
    POWER D, ZAMORA M. Drilling fluid yield stress: measurement techniques for improved understanding of critical drilling fluid parameters[C]//AADE Technical Conference, Houston. 2003: 1-3.
    [13]
    HARRIS A OEHLER, HENRY C MCLAURINE, CHARLES K GRANTHAM. Oil based drilling fluids: US,4816551[P].1989.
    [14]
    季一辉,王建华,李外,等. 油基钻井液用提切剂的研制及性能评价[J]. 现代化工,2014,34(7):100-102,104. doi: 10.16606/j.cnki.issn0253-4320.2014.07.038

    JI Yihui, WANG Jianhua, LI Wai, et al. Development and performance evaluation of lifting agents for oil-based drilling fluids[J]. Modern Chemical, 2014, 34(7):100-102,104. doi: 10.16606/j.cnki.issn0253-4320.2014.07.038
    [15]
    MADKOUR T M, FADL S, DARDIR M M, et al. High performance nature of biodegradable polymeric nanocomposites for oil-well drilling fluids[J]. Egyptian Journal of Petroleum, 2016, 25(2):281-291. doi: 10.1016/j.ejpe.2015.09.004
    [16]
    ZHUANG G, ZHANG Z, JABER M. Organoclays used as colloidal and rheological additives in oil-based drilling fluids: An overview[J]. Applied Clay Science, 2019, 177:63-81. doi: 10.1016/j.clay.2019.05.006
    [17]
    王君,黄平,贺垠博,等. 油基钻井液用改性多聚酸类提切剂及制备方法:中国, CN105368416A[P].2016-03-02.

    WANG Jun, HUANG Ping, HE Yinbo, et al. Modified polyacid-based cut-off agents for oil-based drilling fluids and preparation methods:CN105368416A[P]. 2016-03-02.
    [18]
    MAHALINGAM SANTHANAM. Liquid rheological additives providing rheologhical properties to non-aqueous systems: US, 5723653 [P]. 1998.
    [19]
    ZHUANG G, ZHANG Z, JABER M, et al. Comparative study on the structures and properties of organo-montmorillonite and organo-palygorskite in oil-based drilling fluids[J]. Journal of Industrial and Engineering Chemistry, 2017, 56:248-257. doi: 10.1016/j.jiec.2017.07.017
    [20]
    ZHUANG G, GAO J, PENG S, et al. Synergistically using layered and fibrous organoclays to enhance the rheological properties of oil-based drilling fluids[J]. Applied Clay Science, 2019, 172:40-48. doi: 10.1016/j.clay.2019.02.014
    [21]
    胡润涛. 油基钻井液油相组成分析与有机改性材料在油基钻井液中的作用机理分析[D]. 山东大学, 2019.

    HU Runtao. Analysis of oil phase composition of oil-based drilling fluids and mechanism of organic modified materials in oil-based drilling fluids[D]. Shandong University, 2019.
    [22]
    罗绪武,黄凯,谢建辉,等. 生物柴油基钻井液用提切剂及其制备方法: 中国, CN111748326A[P]. 2020-10-09.

    LUO Xuwu, HUANG Kai, XIE Jianhui, et al. Biodiesel-based drilling fluid lifting agent and its preparation method Beijing: CN111748326A [P]. 2020-10-09.
    [23]
    黄贤斌,孙金声,蒋官澄,等. 改性脂肪酸提切剂的研制及其应用[J]. 中国石油大学学报(自然科学版),2019,43(3):107-112.

    HUANG Xianbin, SUN Jinsheng, JIANG Guancheng, et al. Development of modified fatty acid cutting agent and its application[J]. Journal of China University of Petroleum (Natural Science Edition), 2019, 43(3):107-112.
    [24]
    杨斌. 油基钻井液稳黏提切剂的研制及应用[J]. 钻采工艺,2019,42(1):80-82. doi: 10.3969/J.ISSN.1006-768X.2019.01.24

    YANG Bin. Development and application of viscosity stabilizing and cutting agents for oil-based drilling fluids[J]. Drilling Technology, 2019, 42(1):80-82. doi: 10.3969/J.ISSN.1006-768X.2019.01.24
    [25]
    SHI H, JIANG G C, WANG K, et al. Synthesis of a dendrimer as rheological modifier for deep-water drilling fluids and study of its interaction with organo-clay at different temperatures[C]//Key Engineering Materials. Trans Tech Publications Ltd, 2018, 792: 111-118.
    [26]
    钟汉毅,高鑫,邱正松,等. 树枝状聚合物在钻井液中的应用研究进展[J]. 钻井液与完井液,2019(4):397-406. doi: 10.3969/j.issn.1001-5620.2019.04.001

    ZHONG Hanyi, GAO Xin, QIU Zhengsong, et al. Research progress on the application of dendritic polymers in drilling fluids[J]. Drilling Fluid & Completion Fluid, 2019(4):397-406. doi: 10.3969/j.issn.1001-5620.2019.04.001
    [27]
    刘明华, 胡小燕, 黄桂春, 等. 一种提切剂及其制备方法和油基钻井液:中国,CN107805286A[P].2018-03-16.

    LIU Minhua, HU Xiaoyan, HUANG Guichun, et al. A lifting cutter and its preparation method and oil-based drilling fluid: CN107805286A[P]. 2018-03-16.
    [28]
    赵家乐, 李英敏, 冯杰, 等. 一种油基钻井液提切剂及其制备方法: 中国, CN105623625A[P]. 2016-06-01.

    ZHAO Jiale, LI Yingmin, FENG Jie, et al. An oil-based drilling fluid lifting and cutting agent and its preparation method: CN105623625A[P]. 2016-06-01.
    [29]
    BASFAR S, ELKATATNY S, AL-MAJED A, et al. Prevention of barite sagging for invert emulsion drilling fluid while drilling high-pressure high-temperature wells [C]//International Petroleum Technology Conference. OnePetro, 2020.
    [30]
    鲍荣. 一种油基钻井液用增黏提切剂的制备方法: 中国, CN109666463A[P]. 2019-04-23.

    BAO Ron. A preparation method of viscosity increasing and cutting agent for oil-based drilling fluid: CN109666463A [P]. 2019-04-23.
    [31]
    WAGLE V, AL-YAMI A S, ALABDULLATIF Z. Using nanoparticles to formulate sag-resistant invert emulsion drilling fluids[C]//SPE/IADC Drilling Conference and Exhibition. OnePetro, 2015.
    [32]
    NOAH A Z, EL SEMARY M A, YOUSSEF A M, et al. Enhancement of yield point at high pressure high temperature wells by using polymer nanocomposites based on ZnO & CaCO3 nanoparticles[J]. Egyptian Journal of Petroleum, 2017, 26(1):33-40. doi: 10.1016/j.ejpe.2016.03.002
    [33]
    王京光, 杨斌, 张小平, 等. 一种油基钻井液用提切剂及其制备方法: 中国, CN105038734A[P]. 2015-11-11.

    WANG Jingguang, YANG Bin, ZHANG Xiaoping, et al. A lifting agent for oil-based drilling fluid and its preparation method: CN105038734A [P]. 2015-11-11.
    [34]
    曹杰, 郭保雨, 邱正松, 等. 一种含氟油基钻井液提切剂及其制备方法:中国, CN103289657A[P].2013-09-11.

    CAO Jie, GUO Baoyu, QIU Zhengsong, et al. A fluorine-containing oil-based drilling fluid lifting and cutting agent and its preparation method: CN103289657A[P].2013-09-11.
    [35]
    YILMAZ O, BARANAK M, GÜNER F S, et al. The usage of linseed oil-based polyurethanes as a rheological modifier[J]. Journal of Applied Polymer Science, 2005, 98(3):1032-1035. doi: 10.1002/app.22223
    [36]
    何振奎, 向兴金, 刘霞, 等. 一种高效封堵油基钻井液及其制备方法: 中国, CN103045210A[P]. 2013-04-17.

    HE Zhenkui, XIANG Xingjin, LIU Xia, et al. A high-efficiency plugging oil-based drilling fluid and its preparation method: CN103045210A[P]. 2013-04-17.
    [37]
    ZHOU Y, PU X. Lipophilic rheology modifier and its application in oil‐based drilling fluids[J]. Journal of Applied Polymer Science, 2022, 139(3): 51502.
    [38]
    MAHALINGAM SANTHANAM. Liquid rheological additives providing rheologhical properties to non-aqueous systems: US, 5723653 [P]. 1998.
    [39]
    HUANG X, JIANG G, HE Y, et al. Improvement of rheological properties of invert drilling fluids by enhancing interactions of water droplets using hydrogen bonding linker[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2016, 506:467-475.
    [40]
    侯瑞雪,张景富,徐同台,等. 处理剂对抗高温高密度油基钻井液沉降稳定性的影响[J]. 钻井液与完井液,2014(5):46-48. doi: 10.3969/j.issn.1001-5620.2014.05.013

    HOU Ruixue, ZHANG Jingfu, XU Tongtai, et al. Effect of treatment agents on the settlement stability of anti-high temperature and high density oil-based drilling fluids[J]. Drilling Fluid & Completion Fluid, 2014(5):46-48. doi: 10.3969/j.issn.1001-5620.2014.05.013
    [41]
    王伟,杨洁,荆鹏. 油基增黏提切剂VSSI的制备和性能评价[J]. 长江大学学报(自然科学版),2019(6):30-32.

    WANG Wei, YANG Jie, JING Peng. Preparation and performance evaluation of oil-based viscosity enhancing and cutting agent VSSI[J]. Journal of Changjiang University (Natural Science Edition), 2019(6):30-32.
    [42]
    张群正, 柯从玉, 张洵立, 等. 一种油基钻井液用多功能助剂及其制备方法: 中国, CN104194742A[P]. 2014-12-10.

    ZHANG Qunzheng, KE Congyu, ZHANG Xunli, et al. A multifunctional additive for oil-based drilling fluid and its preparation method: CN104194742A [P]. 2014-12-10.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(8)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (1341) PDF downloads(208) Cited by()
    Proportional views
    Related

    Website Copyright Drilling Fluid & Completion Fluid津ICP备13002319号-1

    Address：Editorial Office of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei Province

    Tel：（0317）2725487　2722354Email：zjyywjy@126.comPost Code：062552

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return