Volume 38 Issue 6
Nov.  2021
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2021  >  38(6): 778-781
CHEN Debao, KANG Jufeng.An instantly prepared cementing spacer of high density[J]. Drilling Fluid & Completion Fluid，2021, 38（6）：778-781 doi: 10.12358/j.issn.1001-5620.2021.06.019
Citation: CHEN Debao, KANG Jufeng.An instantly prepared cementing spacer of high density[J]. Drilling Fluid & Completion Fluid，2021, 38（6）：778-781 doi: 10.12358/j.issn.1001-5620.2021.06.019
shu

An Instantly Prepared Cementing Spacer of High Density

doi: 10.12358/j.issn.1001-5620.2021.06.019
  • 1.

    Drilling Engineering and Technology Research Institute of Daqing Exploratory Drilling Corporation,Daqing, Heilongjiang 163413

  • 2.

    Second Drilling Company of Daqing Exploratory Drilling Corporation,Daqing,Heilongjiang 163413

  • Received Date: 2021-06-29
  • Publish Date: 2021-11-30
    Abstract
  • In order to meet the needs of instant prepared process and solve the problem of viscosity of high density isolating fluid, an integrated treatment agent DQ-SA for spacer was developed, which is mainly composed of surfactant modified biological glue. The weak hydrogen bond of biological glue molecules is broken and the surfactant micelles are arranged directionally when stressed, The base solution of spacer prepared with DQ-SA has obvious shear dilution characteristics. The viscosity of Markovian funnel is only 31s and shows excellent flow performance. At the same time, the simulation experiment of instant prepared is carried out with indoor equipment, the mixing capacity of cementing truck is concluded, and the specific parameters of indoor simulating equipment are determined． Through the laboratory experiment, the balance between the fluidity and stability of the spacer was achieved, and the optimum dosage of the integrated agent was determined. By controlling the proportion of weighting agent, the density of the spacer can be adjusted in a wide range up to 2.40 g/cm3. The evaluation shows that instant prepared spacer has good fluidity, stability, compatibility and temperature resistance. The ground and field tests show that the instant prepared process is easy to operate, the spacer prepared is excellent, and the problems of high density isolating liquid are well solved.

     

    • FullText(HTML)
  • loading
    • References(15)
  • [1]
    房成亮. 调整井压力预测及压力系统分析[D]. 黑龙江大庆: 东北石油大学, 2010.

    FANG Chengliang. Pressure pridiction and analysis system[D]. Heilongjiang Daqing: Northeast Petroleum University, 2010.
    [2]
    吴广福,宋元洪. 传统固井水泥车的现代化技术改造[J]. 设备管理与维修,2014(5):64-66. doi: 10.3969/j.issn.1001-0599.2014.05.038

    WU Guangfu, SONG Yuanhong. Modernization of traditional cementing truck[J]. Plant Maintenance Engineering, 2014(5):64-66. doi: 10.3969/j.issn.1001-0599.2014.05.038
    [3]
    和传健, 徐明, 肖海东. 高密度冲洗隔离液的研究[J]. 钻井液与完井液. 2004, 21（5）: 19-21, 26.

    HE Chuanjian, XU Ming, XIAO Haidong. Study on high density flushing space fluid[J]. Drilling Fluid & Completion Fluid, 2004, 21（5）: 19-21, 26.
    [4]
    舒福昌, 向兴金, 罗刚, 等. 高密度双作用前置液性能研究[J]. 石油天然气学报, 2007, 29（1）: 96-98.

    SHU Fuchang, XIANG Xingjin, LUO Gang, et al. The performance of dual-action high density prepad fluid[J]. Journal of Oil and Gas Technology, 2007, 29（1）: 96-98.
    [5]
    王广雷,王海淼,姜增东,等. 抗180 ℃高温水基隔离液的研制与应用[J]. 钻井液与完井液,2011,28(1):40-42. doi: 10.3969/j.issn.1001-5620.2011.01.013

    WANG Guanglei, WANG Haimiao, JIANG Zengdong, et al. Research and application of 180℃ water based spacer fluid[J]. Drilling Fluid & Completion Fluid, 2011, 28(1):40-42. doi: 10.3969/j.issn.1001-5620.2011.01.013
    [6]
    任春宇,陈大钧. RC型冲洗液性能的室内研究[J]. 钻井液与完井液,2012,29(6):66-67. doi: 10.3969/j.issn.1001-5620.2012.06.020

    REN Chunyu, CHEN Dajun. Laboratory study on performance of RC type washing liquid[J]. Drilling Fluid & Completion Fluid, 2012, 29(6):66-67. doi: 10.3969/j.issn.1001-5620.2012.06.020
    [7]
    邓慧,郭小阳,李早元,等. 一种新型注水泥前置隔离液[J]. 钻井液与完井液,2012,29(3):54-57. doi: 10.3969/j.issn.1001-5620.2012.03.017

    DENG Hui, GUO Xiaoyang, LI Zaoyuan, et al. Study on new type of ahead spacer fluid system before cementing[J]. Drilling Fluid & Completion Fluid, 2012, 29(3):54-57. doi: 10.3969/j.issn.1001-5620.2012.03.017
    [8]
    杨远光, 孙勤亮, 王乐顶, 等. 一种基于剪切速率相等原理的固井冲洗液评价装置: CN, 203594388[P]. 2014.

    YANG Yuanguang, SUN Qinliang, WANG Leding, et al. An evaluation device for cementing flushing fluid based on the principle of equal shear rate: CN, 203594388[P]. 2014.
    [9]
    齐静,李宝贵,张新文,等. 适用于油基钻井液的高效前置液的研究与应用[J]. 钻井液与完液,2008,25(3):49-51.

    QI Jing, LI Baogui, ZHANG Xinwen, et al. Research and application of high efficientpre solution is suitable for oil base drilling fluid[J]. Drilling Fluid & Completion Fluid, 2008, 25(3):49-51.
    [10]
    由福昌,许明标. 一种固井前置冲洗液冲洗效率的评价方法[J]. 钻井液与完井液,2009,26(6):47-48. doi: 10.3969/j.issn.1001-5620.2009.06.016

    YOU Fuchang, XU Mingbiao. An evaluation of cementing preflush flushing efficiency method[J]. Drilling Fluid & Completion Fluid, 2009, 26(6):47-48. doi: 10.3969/j.issn.1001-5620.2009.06.016
    [11]
    陈光,刘秀军,宋剑鸣,等. 丁基羟基茴香醚提高冲洗液抗高温性的研究[J]. 钻井液与完井液,2017,34(3):81-84. doi: 10.3969/j.issn.1001-5620.2017.03.016

    CHEN Guang, LIU Xiujun, SONG Jianming et al. Use butylated hydroxyanisole to improve high temperature stability of flushing fluid[J]. Drilling Fluid & Completion Fluid, 2017, 34(3):81-84. doi: 10.3969/j.issn.1001-5620.2017.03.016
    [12]
    刘丽娜,李明,谢冬柏,等. 一种适用于油基钻井液的表面活性剂隔离液[J]. 钻井液与完井液,2017,34(3):77-80. doi: 10.3969/j.issn.1001-5620.2017.03.015

    LIU Lina, LI Ming, XIE Dongbai, et al. A surfactant spacer for use in oil base drilling fluid[J]. Drilling Fluid & Completion Fluid, 2017, 34(3):77-80. doi: 10.3969/j.issn.1001-5620.2017.03.015
    [13]
    陈大钧, 雷鑫宇, 李芹, 等. 双重强化界面胶结强度技术[J]. 钻井液与完井液, 2014, 31（1）: 57-59.

    CHEN Dajun, LEI Xinyu, LI Qin, et al. The double strengthening technology of interface bonding strength[J]. Drilling Fluid & Completion Fluid, 2014, 31（1）: 57-59.
    [14]
    陈大钧,王雪敏,吴永胜,等. 高密度高效冲洗液XM-1[J]. 钻井液与完井液,2015,32(3):70-72. doi: 10.3969/j.issn.1001-5620.2015.03.019

    CHEN Dajun, WANG Xuemin, WU Yongsheng, et al. High density flushing fluid XM-1[J]. Drilling Fluid & Completion Fluid, 2015, 32(3):70-72. doi: 10.3969/j.issn.1001-5620.2015.03.019
    [15]
    高文龙. 零散更新井钻降关井方法研究[J]. 化学工程与装备,2015,11(3):86-88.

    GAO Wenlong. Study on shutting in to lowering pressure for scattered renewal wells[J]. Fujian Chemical Industry, 2015, 11(3):86-88.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Tables(4)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (698) PDF downloads(54) Cited by()
    Proportional views
    Related

    Website Copyright Drilling Fluid & Completion Fluid津ICP备13002319号-1

    Address：Editorial Office of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei Province

    Tel：（0317）2725487　2722354Email：zjyywjy@126.comPost Code：062552

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return