Discussion on the Quantitative Study and Impact Factors of Differentialized Corrosion in Fractures Generated by Acid Corrosion
-
摘要: 酸液对裂缝壁面差异化刻蚀的关键因素在于酸液黏性指进的形态以及程度,但前人鲜少对2者关系进行量化表征。采用有限体积法对酸液黏性指进过程进行动态模拟,分析了不同黏度比、黏度差、密度差条件下的指进形态变化规律,并通过指进程度定义了描述差异化刻蚀程度的参数,对不同条件下的差异化刻蚀程度进行定量表征。结果显示,排量为5m3/min条件下,满足黏度差为250~350 mPa·s,黏度比为15~20,且密度差为0~0.01 g/cm3时,差异化刻蚀程度较大,改变不同的排量进行数学表征,酸液差异化刻蚀程度表现出相同的变化规律。Abstract: The pattern and extent of the viscous fingering of an acid are two key factors affecting the differentialized corrosion of the wall surface of fractures by the acid. Quantitative srudy of the relationship between the two factors is rarely seen at present. In laboratory experiment, the viscous fingering of acid was dynamically simulated using finite volume method, the change patterns of viscous fingering at different viscosity ratios, viscosity differences and density differences were analyzed, and the extent of differentialized corrosion at different conditions was quantitatively characterized using parameters describing the extent of differentialized corrosion at a certain fingering level. It was found that at flow rate of 5 m3/min, a high level of differentialized corrosion was reached when the viscosity difference was between 250 mPa·s and 350 mPa·s, the viscosity ratio between 15 and 20, and the density difference between 0 g/cm3 and 0.01 g/cm3. A similar pattern of change of the differentialized corrosion by acid can be found by changing the flow rate.
-
[1] 卢渊,李沁,张浩,等. 油气储层保护与改造技术[M]. 北京:科学出版社,2017. LU Yuan, LI Qin, ZHANG Hao,et al. Oil and gas reservoir protection and reconstruction technology[M]. Beijing:Science Press,2017. [2] 刘建坤,蒋廷学,周林波,等. 碳酸盐岩储层多级交替酸压技术研究[J]. 石油钻探技术,2017,45(1):104-111.LIU Jiankun, JIANG Tingxue,ZHOU Linbo,et al. Study on multi-stage alternating acid fracturing technology of carbonate reservoirs[J].Petroleum Drilling Techniques, 2017,45(1):104-111. [3] 何新明,陈冀嵋,吴安林. 油气藏酸压工艺技术现状与发展[J]. 断块油气田,2009,16(2):95-98.HE Xinming,CHEN Jimei, WU Anlin.Current status and development of acid fracturing technology in oil and gas reservoirs[J].Fault Block Oil and Gas Field,2009, 16(2):95-98. [4] 周林波,宋志峰,张俊江,等.MX井深层白云岩储层非均匀酸化压裂技术[J]. 特种油气藏,2017,24(6):161-164.ZHOU Linbo,SONG Zhifeng,ZHANG Junjiang, et al. The non-uniform acid fracturing technology of deep dolomite reservoir in MX well[J].Special Oil & Gas Reservoirs,2017,24(6):161-164. [5] CHEN J D,WILKINSON D.Pore-scale viscous fingering in porous media[J].Physical Review Letters,1985,55256钻井液与完井液2019年3月(18):1892-1895. [6] DAVIES D R, BOSMA M G R, DE W.Development of field design rules for viscous fingering in acid fracturing treatments:a large-scale model study[J].Middle East Oil Show,SPE 15772,1987. [7] 屈世显,张建华. 复杂系统的分形理论及应用[M]. 陕西西安:陕西人民出版社,1996. QU Shixian,ZHANG Jianhua.Fractal theory and application of complex systems[M].Xi'an, Shaanxi:Shaanxi People's Publishing House,1996. [8] 李小刚,杨兆中,陈锐,等. 前置液酸压缝中酸液指进的物模与分形研究[J]. 西南石油大学学报(自然科学版),2007,29(6):105-108. LI Xiaogang,YANG Zhaozhong,CHEN Rui,et al. Study on the physical model and fractal of the acid solution in the pre-liquid acid fracturing seam[J].Journal of Southwest Petroleum University,2007,29(6):105-108. [9] CHRISTIE M A,BOND D J.Detailed simulation of unstable processes in miscible flooding[J].SPE Reservoir Engineering,1987,2(4):514-522. [10] 李小刚,杨兆中,蒋海,等. 酸压裂缝内酸液指进的计算机模拟与分形研究[J]. 西安石油大学学报(自然科学版),2008(5):65-69. LI Xiaogang, YANG Zhaozhong,JIANG Hai,et al. Computer simulation and fractal study of acid fingering in acid fracturing cracks[J].Journal of Xi'an Shiyou University,2008(5):65-69. [11] 滕德林,李鹏亮.Level Set方法在模拟酸液指进中的应用探讨[J]. 内江科技,2014,35(5):67-68.TENG Delin,LI Pengliang.Application of level set method in simulating acid fingering[J].Neijiang Science and Technology,2014,35(5):67-68. [12] 王艳丽. 新型高性能转向酸的制备及性能评价[J]. 钻井液与完井液,2016,33(6):111-115.WANG Yanli.Preparation and evaluation of a new high performance diverting acid[J].Drilling Fluid & Completion Fluid, 2016, 33(6):111-115. [13] 金鑫,刘高洁,郭照立. 多孔介质内混溶流体间黏性指进现象的格子Boltzmann模型[J]. 计算物理,2015, 32(4):423-430.JIN Xin,LIU Gaojie,GUO Zhaoli.Lattice boltzmann model for viscous fingering between miscible fluids in porous media[J].Chinese Journal of Computational Physics,2015,32(4):423-430. [14] 雷体蔓,孟旭辉,郭照立. 微通道内反应流体黏性指进的数值研究[J]. 计算物理, 2016,33(1):30-38.LEI Timan,MENG Xuhui,GUO Zhaoli.Numerical study on the viscous fingering of reactive fluids in microchannels[J].Chinese Journal of Computational Physics,2016,33(1):30-38. [15] 刘享,伊向艺,吴元琴,等. 酸压裂缝中酸液微观流动数值模拟及分析[J]. 钻井液与完井液,2017,34(4):106-111.LIU Xiang,YI Xiangyi,WU Yuanqin,et al.Numerical simulation and analysis of acid flow in acid fractures[J]. Drilling Fluid & Completion Fluid,2017,34(4):106-111. [16] 罗志锋,张楠林,赵立强,等. 前置液酸压缝内酸液指进数值模拟[J]. 油气藏评价与开发, 2017,7(5):26-31.LUO Zhifeng,ZHANG Nanlin,ZHAO Liqiang, et al. Numerical simulation of acid fingering in pre-liquid acid fracturing seam[J].Journal of Oil and Gas Reservoir Evaluation and Development,2017,7(5):26-31. [17] 滕德林. 酸压裂缝内酸液指进演化数值模拟研究[D]. 四川成都:西南石油大学,2014. TENG Delin.Numerical simulation of the evolution of fingers in acid fracturing[D].Chengdu,Sichuan:Southwest Petroleum University,2014. [18] 吴红军,孔嫦娥,伊向艺,等. 裂缝性碳酸盐岩酸蚀蚓孔数字化分析[J]. 钻井液与完井液,2016,33(4):105-108.WU Hongjun,KONG Chang'e,YI Xiangyi,et al. Numerical analysis of acid-corroded wormholes in fractured carbonate rocks[J].Drilling Fluid & Completion Fluid,2016,33(4):105-108. [19] 王旭,贾文峰,任倩倩,等. 一种新型乳化胶凝酸的制备与性能评价[J]. 钻井液与完井液,2017,34(5):111-116.WANG Xu,JIA Wenfeng,REN Qianqian,et al. Development and evaluation of a new emulsified gelled acid[J].Drilling Fluid & Completion Fluid,2017,34(5):111-116.
点击查看大图
计量
- 文章访问数: 513
- HTML全文浏览量: 128
- PDF下载量: 178
- 被引次数: 0