留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于ABAQUS的裂缝性漏失过程动态模拟研究

陈晓华,  邱正松,  杨鹏,  郭保雨,  王宝田,  王旭东

downloadPDF
文章导航 > 钻井液与完井液  > 2019 >  36(1): 15-19
陈晓华, 邱正松, 杨鹏, 郭保雨, 王宝田, 王旭东. 基于ABAQUS的裂缝性漏失过程动态模拟研究[J]. 钻井液与完井液, 2019, 36(1): 15-19. doi: 10.3969/j.issn.1001-5620.2019.01.003
引用本文: 陈晓华, 邱正松, 杨鹏, 郭保雨, 王宝田, 王旭东. 基于ABAQUS的裂缝性漏失过程动态模拟研究[J]. 钻井液与完井液, 2019, 36(1): 15-19. doi: 10.3969/j.issn.1001-5620.2019.01.003
shu
CHEN Xiaohua, QIU Zhengsong, YANG Peng, GUO Baoyu, WANG Baotian, WANG Xudong. Dynamic Simulation of Mud Losses into Fractured Formations Using ABAQUS Software[J]. DRILLING FLUID & COMPLETION FLUID, 2019, 36(1): 15-19. doi: 10.3969/j.issn.1001-5620.2019.01.003
Citation: CHEN Xiaohua, QIU Zhengsong, YANG Peng, GUO Baoyu, WANG Baotian, WANG Xudong. Dynamic Simulation of Mud Losses into Fractured Formations Using ABAQUS Software[J]. DRILLING FLUID & COMPLETION FLUID, 2019, 36(1): 15-19. doi: 10.3969/j.issn.1001-5620.2019.01.003
shu

基于ABAQUS的裂缝性漏失过程动态模拟研究

doi: 10.3969/j.issn.1001-5620.2019.01.003

  • 1. 中国石油大学(华东)石油工程学院, 山东青岛 266580;

  • 2. 中国石油化工股份有限公司华北油气分公司, 河南郑州 450006;

  • 3. 中国石油集团长城钻探工程技术研究院, 辽宁盘锦 124010;

  • 4. 中石化胜利石油工程有限公司钻井工程技术公司, 山东东营 257064

基金项目: 

国家重大专项（2017ZX05032-004-005）、国家自然基金石油化工联合基金（U1562101）、国家科技重大专项（2016ZX05020-004）、国家科技重大专项（2016ZX05048）

详细信息
    作者简介:

    陈晓华,1984年生,中国石油大学(华东)油气井工程专业在读博士研究生,现在主要从事钻井液技术研究工作。电话15650189135;E-mail:S16020199@s.upc.edu.cn

  • 中图分类号: TE282

Dynamic Simulation of Mud Losses into Fractured Formations Using ABAQUS Software

  • 1. School of Petroleum Engineering, China University of Petroleum(East China), Shandong, Qingdao 266580;

  • 2. Sinopec North China Company, Henan, Zhengzhou 450006;

  • 3. Engineering Technology Research Institute, Great Wall Drilling Company of CNPC, Liaoning, Panjin 124010;

  • 4. Branch of Drilling Engineering Technology, Sinopec Shengli Petroleum Engineering Company Ltd., Shandong, Dongying 257064

    摘要
  • 摘要: 裂缝性漏失最为普遍、复杂且难以解决，由于现场难以对其漏失过程进行准确预测，导致目前裂缝性漏失堵漏成功率较低。基于损伤力学原理，利用ABAQUS软件中的cohesive单元模拟漏失过程中裂缝的起裂和扩展，建立了三维地层裂缝性动态漏失模型。通过分析漏失过程中裂缝形态、井周应力及地层孔隙压力的变化情况，得到了裂缝性漏失过程的动态规律。研究结果表明，随着漏失时间的增加，裂缝的开度受扩展压力的影响先降低后逐渐增加；随着裂缝开度的增加，裂缝长度的增长幅度逐渐变缓；漏失裂缝的扩展使得裂缝开口（0°位置）附近井周压应力逐渐下降，在垂直于裂缝开口附近井周压应力逐渐增加；井周附近孔隙压力受钻井液侵入的影响，随着时间的增加逐渐增大。

     

    Abstract: Mud losses into fractured formations are the most common mud losses encountered in drilling fractured formations, and they are most complex and most difficult to control. Since mud losses into fractured formations are difficult to predict accurately in field operations, the success rate of bringing them under control is relatively low. Based on the principles of damage mechanics, the initiation of fracturing and propagation of the fracture during mud losses was simulated using the cohesive module of the ABAQUS software, and a 3D model describing the dynamic process of mud losses into fractured formations was established. The dynamic patterns of mud losses into fractured formations was obtained by analyzing the shape of fractures, the well circumferential stress and the pore pressures during mud losses. The study results showed that as the time of mud losses went on, the effect of the propagation pressure on the opening of a fracture was gradually weakening at first and then was increasing. As the opening of the fracture increased, the length of the fracture was increasing more and more slowly. The propagation of a fracture into which the mud was losing caused circumferential compressive stress around the mouth of the fracture (near the 0° position) to gradually decrease, while the circumferential compressive stress perpendicular to the mouth of the fracture was increasing. Pore pressures near the wellbore were affected by the invasion of drilling fluid, and were gradually increasing with time.

     

    • HTML全文
    • 参考文献(14)
  • [1] 邱正松, 暴丹, 刘均一,等.裂缝封堵失稳微观机理及致密承压封堵实验[J]. 石油学报,2018,39(5):587-596.

    QIU Zhengsong, BAO Dan,LIU Junyi,et al. Microcosmic mechanism of fracture-plugging instability and experimental study on pressure bearing and tight plugging[J].Acta Petrolei Sinica,2018,39(5):587-596.
    [2] 赵正国,蒲晓林,王贵,等.裂缝性漏失的桥塞堵漏钻井液技术[J]. 钻井液与完井液, 2012, 29(3):44-46.

    ZHAO Zhengguo,PU Xiaolin,WANG Gui,et al. Study on drilling fluid bridge plugging technology for fractured formation[J].Drilling Fluid & Completion Fluid,2012,29(3):44-46.
    [3] 徐江,石秉忠,王海波,等. 桥塞封堵裂缝性漏失机理研究[J]. 钻井液与完井液,2014,31(1):44-46.

    XU Jiang,SHI Bingzhong,WANG Haibo,et al. Mechanism study on bridge plugging technology for fractured formation[J].Drilling Fluid & Completion Fluid,2014,31(1):44-46.
    [4] 贾利春,陈勉,侯冰,等.裂缝性地层钻井液漏失模型及漏失规律[J].石油勘探与开发, 2014, 41(1):95-101.

    JIA Lichun,CHEN Mian,HOU Bing,et al.Drilling fluid loss model and loss dynamic behavior in fractured formations[J].Petroleum Exploration and Development, 2014, 41(1):95-101.
    [5] 李大奇, 康毅力, 刘修善,等. 裂缝性地层钻井液漏失动力学模型研究进展[J]. 石油钻探技术, 2013, 41(4):42-47.

    LI Daqi,KANG Yili,LIU Xiushan,et al.Progress in drilling fluid loss dynamics model for fractured formations[J].Petroleum Drilling Techniques,2013,41(4):42-47.
    [6] 舒刚,孟英峰,李红涛,等. 裂缝内钻井液的漏失规律研究[J]. 石油钻采工艺,2011,33(6):29-32.

    SHU Gang,MENG Yingfeng,LI Hongtao,et al. Leakage laws research of drilling fluid in fracture reservoir[J].Oil Drilling and Production Technology, 2011, 33(6):29-32.
    [7] CHEN Y, YU M, TAKACH N. Modeling and analysis of coupled thermal-hydrologic-mechanical processes during lost circulation[J].Journal of Petroleum Science and Engineering,2018,165:223-233.
    [8] 张广明, 刘合, 张劲,等. 水平井水力压裂的三维有限元数值模拟研究[J]. 工程力学, 2011, 28(2):101-106.

    ZHANG Guangming,LIU He,ZHANG Jin,et al. Three-dimensional finite element numerical simulation of horizontal well hydraulic fracturing[J].Engineering Mechanics,2011,28(2):101-106.
    [9] 连志龙, 张劲, 王秀喜, 等. 水力压裂扩展特性的数值模拟研究[J]. 岩土力学,2009,30(1):169-174.

    LIAN Zhilong, ZHANG Jin, WANG Xiuxi, et al. Simulation study of characteristics of hydraulic fracturing propagation[J].Rock and Soil Mechanics, 2009, 30(1):169-174.
    [10] 许明,刘先珊. 考虑流固耦合效应的储层砂岩力学响应分析[J]. 中国石油大学学报(自然科学版),2014, 38(2):147-152. XU Ming,LIU Xianshan.Mechanical response analysis of reservoir sandstone considering fluid-solid coupling effect[J].Journal of China University of Petroleum, 2014,38(2):147-152.
    [11] 张广明. 水平井水力压裂数值模拟研究[D]. 中国科学技术大学,2010. ZHANG Guangming.A numerical simulation study on hydraulic fracturing of horizontal wells[D].University of Science and Technology of China,2010.
    [12] CAMANHO P P,DAVILA C G.Mixed-mode decohesion finite elements for the simulation of delamination in composite materials[R].NASA/TM-2002-211737,2002:1-37.
    [13] TURON A,CAMANHO P P,COSTA J.A damage model for the simulation of delamination in advanced composites under variable-model loading[J].Mechanics of Materials,2006,38:1072-1089.
    [14] 李佳,邱正松,宋丁丁,等. 井壁强化作用影响因素的数值模拟[J]. 钻井液与完井液,2017,34(2):1-8.

    LI Jia,QIU Zhengsong,SONG Dingding,et al. Numeric simulation of factors affecting the strengthening of borehole wall[J].Drilling Fluid & Completion Fluid, 2017,34(2):1-8.
    • 相关文章
    • 施引文献
  • 资源附件(0)
  • 加载中
WeChat 点击查看大图
计量
  • 文章访问数:  784
  • HTML全文浏览量:  219
  • PDF下载量:  317
  • 被引次数: 0
出版历程
  • 收稿日期:  2018-10-09
  • 刊出日期:  2019-02-28

目录

    /

    返回文章
    返回

    网站版权所有 《钻井液与完井液》津ICP备13002319号-1

    地址：河北省任丘市燕山南道渤海钻探工程院《钻井液与完井液》编辑部邮政编码：062552

    电话：（0317）2725487　2722354Email：zjyywjy@126.com

    本系统由 北京仁和汇智信息技术有限公司 开发    百度统计