[1] |
CAENN R, DARLEY H C H, GRAY G R. Composition and properties of drilling and completion fluids, the filtration properties of drilling fluids[M]. sixth ed., Kidlington, Oxford:Gulf Professional Publishing, 2011.
|
[2] |
GERI B S B, AL-MUTAIRI S H, MAHMOUD M A. Different techniques for characterizing the filter cake[C]. 2013 SPE Middle East Unconventional Gas Conference & Exhibition, Muscat, Oman, 2013.
|
[3] |
ASTON M, MIHALIK P, TUNBRIDGE J, et al. Towards zero fluid loss oil based muds[C]. SPE Annual Technical Conference and Exhibition, San Antonio,Texas, 2002.
|
[4] |
OVERVELDT A S V, GUO H, BLOK G D, et al. A CT scan aided core-flood study of the leak-off process in oil-based drilling fluids[C]. SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA, 2012.
|
[5] |
周风山, 王世虎, 李继勇, 等. 泥饼结构物理模型与数学模型研究[J]. 钻井液与完井液, 2003, 20(3):4-8.ZHOU Fengshan, WANG Shihu, LI Jiyong, et al. Mathematical & physical models for drilling fluid filter cake[J]. Drilling Fluid & Completion Fluid, 2003, 20(3):4-8.
|
[6] |
ELKATATNY S, MAHMOUD M A, NASR-EL-DIN H A. Characterization of filter cake generated by waterbased drilling fluids using CT scan[J]. SPE Drilling & Completion, 2012, 27(2):282-293.
|
[7] |
ELKATATNY S, MAHMOUD M, NASR-EL-DIN H A. Filter cake properties of water-based drilling fluids under static and dynamic conditions using computed tomography scan[J]. Journal of Energy Resources Technology, 2013, 135(4):042201.
|
[8] |
ELKATATNY S, ROSTAMI A, Nasr-El-Din H A. Characterization a self-destructing filter cake by using computer tomography[C].SPE/IADC Middle East Drilling Technology Conference and Exhibition, Muscat, Oman, 2011.
|
[9] |
ELKATATNY S, NASR-EL-DIN H A. Properties of filter cake of water-based drilling fluid under dynamic conditions using computer tomography[C]. IADC/SPE Drilling Conference and Exhibition, San Diego, California, 2012.
|
[10] |
JIAO D, SHARMA M M. Mechanism of cake buildup in crossflow filtration of colloidal suspensions[J]. Journal of Colloid and Interface Science, 1994, 162(2):454-462.
|
[11] |
DARCY H. Determination of the laws of flow of water through sand[J]. Fluid/Particle Separation Journal, 1989, 2:33-35.
|
[12] |
DANGOU M A, CHANDLER H. Potential increase of formation damage at horizontal wells as a result of changing dynamic filter cake parameters with the shear rate[C]. 8th European Formation Damage Conference, Scheveningen, The Netherlands, 2009.
|
[13] |
CHENEVERT M E, DEWAN J T. A model for filtration of water-base mud during drilling:determination of mudcake parameters[J]. PetroPhysics, 2001, 42(3):237-250.
|
[14] |
GERI B S B, AL-MUTAIRI S H, MAHMOUD M A. Different techniques for characterizing the filter cake[C]. 2013 SPE Middle East Unconventional Gas Conference & Exhibition, Muscat, Oman, 2013.
|
[15] |
TILLER F M. Theory and practice of solid-liquid separation[M]. Houston:Texas University of Houston, 2002.
|
[16] |
LI W, KISER C, Richard Q. Development of a filter cake permeability test methodology[J]. FiltrationCoalville, 2006, 6(1):57.
|
[17] |
ELKATATNY S M, MAHMOUD M A, NASR-EL-DIN H A. A new approach to determine filter cake properties of water-based drilling fluids[C]. SPE/DGS Saudi Arabia Section Technical Symposium and Exhibition, AlKhobar, Saudi Arabia, 2011.
|
[18] |
KHATIB Z I. Prediction of formation damage due to suspended solids:modeling approach of filter cake buildup in injectors[C]. SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 1994.
|
[19] |
RAUTELA M S. A method for determination of the permeability of the filter cake at wellsite[J]. 2000.
|
[20] |
GR GRAY, HC DARLEY, WF ROGERS. Compostion and properties of oil well drilling fluids[M]. 4 ed. Houston:Gulf Pub. Co., Book Division(Houston), 1980.
|
[21] |
CIVAN F. Improved permeability equation from the bundle-of-leaky-capillary-tubes model[C].SPE Production Operations Symposium, Oklahoma, 2005.
|
[22] |
熊汉桥, 王平全, 任富鹏, 等. 钻井完井中动态外滤饼形成的数学模型研究[J]. 天然气技术, 2010, 4(1):42-44.XIONG Hanqiao, WANG Pingquan, REN Fupeng, et al. Mathematical model developed for external filter cake during drilling and completion[J]. Natural gas technology, 2010, 4(1):42-44.
|
[23] |
PLANK J P, GOSSEN F A. Visualization of fluid-loss polymers in drilling-mud filter cakes[J]. SPE Drilling Engineering, 1991, 6(3):203-208.
|
[24] |
PITONI E, BALLARD D A, KELLY R M. Changes in solids composition of reservoir drill in fluids during drilling and the impact on filter cake properties[C]. SPE European Formation Damage Conference, The Hague, Netherlands, 1999.
|
[25] |
JIAO D, SHARMA M M. Investigation of dynamic mud cake formation:the concept of minimum overbalance pressure[C]. SPE Annual Technical Conference and Exhibition, Houston, Texas, 1993.
|
[26] |
吴志均, 杨宪民. 泥饼质量评价方法探讨[J]. 钻井液与完井液, 1997, 14(6):6-8.WU Zhijun, YANG Xianmin. Evaluation method for mud cake quality[J]. Drilling Fluid & Completion Fluid, 1997, 14(6):6-8.
|
[27] |
景天佑. 泥饼厚度测量仪:1072497A[P]. 1993-05-26.JING Tianyou. Mud cake thickness measuring instrument:1072497A[P]. 1993-05-26.
|
[28] |
侯勤立, 蒲晓琳, 崔茂荣. 一种测量钻井液滤饼厚度的装置:2441113Y[P]. 2001-08-01.HOU Qinli, PU Xiaolin, CUI Maorong. A device for measuring thickness of mud cake:2441113Y[P]. 2001-08-01.
|
[29] |
张洪杰, 郑力会. 钻井液滤饼厚度测量新方法初探[J]. 钻井液与完井液, 2008, 23(6):61-63.ZHANG Hongjie, ZHENG Lihui. Research on the new method of measuring filter cake thickness[J]. Drilling Fluid & Completion Fluid, 2008, 23(6):61-63.
|
[30] |
雷宗明. 泥饼的压缩性方程[J]. 钻采工艺, 1992, 15(2):13-14.LEI Zongming. The mud cake compressibility equation[J]. Drilling & production technology, 1992, 15(2):13-14.
|
[31] |
崔茂荣, 罗兴树. 泥浆泥饼压缩性评价方法对比研究[J]. 西南石油学院学报, 1996, 18(1):46-54.CUI Maorong, LUO Xingshu. Comparison of existing method for evaluating compressibility of mud cake[J]. Journal of SWPI, 1996, 18(1):46-54.
|
[32] |
杜德林. 泥饼可压缩性的定量研究[J]. 钻井液与完井液, 1996, 13(1):4-9.DU Delin. Quantitative study on the compressibility of mud filter cakes[J]. Drilling Fluid & Completion Fluid, 1996, 13(1):4-9.
|
[33] |
胡永宏, 高锦屏, 郭东荣, 等. 钻井液滤饼强度实验方法的建立[J]. 石油大学学报:自然科学版, 1993, 17(6):45-49.HU Yonghong, GAO Jinping, GUO Dongrong, et al. development of the experiment method for measuring strength of drilling fluid filter cakes[J]. Journal of China University of Petroleum(Edition of Natural Sciences), 1993, 17(6):45-49.
|
[34] |
CERASI P, LADVA H K, BRADBURY A J, et al. Measurement of the mechanical properties of filtercakes[C]. SPE European Formation Damage Conference, The Hague, Netherlands, 2001.
|
[35] |
BERNTSEN A N, ROBBES A S, CERASI P R, et al. Laboratory investigation of brine diffusion through oilbased mud filter cakes[C]. SPE International Symposium and Exhibiton on Formation Damage Control, Lafayette, Louisiana, 2010.
|
[36] |
王松, 魏霞, 喻霞, 等. 钻井液泥饼强度评价研究[J]. 钻井液与完井液, 2011, 28(01):11-13.WANG Song, WEI Xia, YU Xia, et al. Research on evaluation of mud cake intensive[J]. Drilling Fluid & Completion Fluid, 2011, 28(01):11-13.
|
[37] |
周风山, 倪文学. 泥饼强度影响因素研究[J]. 西安石油学院学报:自然科学版, 1999, 14(4):22-25.ZHOU Fengshan, NI Wenxue. A study on the factors influencing the strength of drilling fluid filter cake[J]. Journal of Xi'an Shiyou University:Naturnal Science Edition, 1999, 14(4):22-25.
|
[38] |
夏晨, 庸富华. 深井钻井泥浆泥饼质量评价技术研究与应用[J]. 内蒙古石油化工, 2009, 35(22):115-117.XIA Chen, YONG Fuhua. A new multi-factor Mutilevel Method for drilling mud experiment design[J]. Inner Mongolia Petrochemical Industry, 2009, 35(22):115-117.
|
[39] |
ZAMORA M, LAI D T, DZIALOWSKI A K. Innovative devices for testing drilling muds[J]. SPE Drilling Engineering, 1990, 5(1):11-16.
|
[40] |
ZAIN Z M, SURI A, SHARMA M M. Mechanisms of mud cake removal during flowback[C].SPE International Symposium on Formation Damage Control, Lafayette, Louisiana, 2000.
|
[41] |
CHENEVERT M E, HUYCKE J. Filter cake structure analysis using the scanning electron microscope[J]. SPE Journal, 1991.
|
[42] |
RUESSINK B H, HARVILLE D G. Quantitative analysis of bulk mineralogy:the applicability and performance of XRD and FTIR[C]. SPE Formation Damage Control Symposium, Lafayette, Louisiana, 1992.
|
[43] |
GOLDSTEIN J, NEWBURY D E, JOY D C, et al. Scanning electron microscopy and X-ray microanalysis[M]. 3 ed. Springer, 2003.
|
[44] |
NASR-EL-DIN H A, AL-OTAIBI M B, AL-QAHTANI A A, et al. An effective fluid formulation to remove drilling fluid mud cake in horizontal and multi-lateral wells[J]. SPE Drilling & Completion, 2007, 22(01):26-32.
|
[45] |
AL MOAJIL A M, NASR-EL-DIN H A, AL-YAMI A S, et al. Removal of filter cake formed by manganese tetraoxide-based drilling fluids[C]. SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, 2008.
|
[46] |
ALOTAIBI M B, NASR-EL-DIN H A, HILL A D. Characteristics and removal of filter cake formed by formate-based drilling mud[C].SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, 2008.
|
[47] |
BORST R L, SHELL F J. The effect of thinners on the fabric of clay muds and gels[J].Journal of Petroleum Technology, 1971, 23(10):1193-1201.
|
[48] |
PORTE K E. A basic scanning electron microscope study of drilling fluids[C]. SPE Formation Damage Symposium, Bakersfield, California, 1980.
|
[49] |
朱启武, 何笑薇, 周永璋, 等. 非酸性氧化型复配钻井液滤饼清洗剂的研究[J]. 钻井液与完井液, 2014, 31(2):47-50.ZHU Qiwu, HE Xiaowei, ZHOU Yongzhang, et al. Study on non-acidic oxidizing compound mud cake remover[J]. Drilling Fluid & Completion Fluid, 2014, 31(2):47-50.
|
[50] |
PEDEN J M, AVALOS M R, ARTHUR K G. The analysis of the dynamic filtration and permeability impairment characteristics of inhibited water based muds[C]. SPE Formation Damage Control Symposium, Lafayette, 1982.
|
[51] |
HARTMANN A, ÖZERLER M, MARX C, et al. Analysis of mudcake structures formed under simulated borehole conditions[J]. SPE Drilling Engineering, 1988, 3(4):395-402.
|
[52] |
PLANK J, GOSSEN F. Visualization of fluid-loss polymers in drilling-mud filter cakes[J]. SPE Drilling Engineering, 1991, 6(03):203-208.
|
[53] |
MEHTA S. Imaging of wet specimens in their natural state using environmental scanning electron microscope (ESEM):some examples of importance to petroleum technology[C]. SPE Annual Technical Conference and Exhibition, Dallas, Texas, 1991.
|
[54] |
GAUCHET R, CHENEVIERE P, TRICART J P. Visualization of rock samples in their natural state using environmental scanning electron microscope[C]. SPE Annual Technical Conference and Exhibition, Houston, Texas, 1993:10-03.
|
[55] |
SIMANJUNTAK A, HAYNES L. Esem observations coupled with coreflood tests improve matrix acidizing designs[C]. SPE Formation Damage Control Symposium, Lafayette, Louisiana, 1994.
|
[56] |
ROBIN M, COMBES R, ROSENBERG E. CryoSEM and ESEM:new techniques to investigate phase interactions within reservoir rocks[C]. SPE annual technical conference and exhibition, Houston, Texas, 1999.
|
[57] |
RAJU K U, NASR-EL-DIN H A, HILAB V, et al. Injection of aquifer water and GOSP disposal water into tight carbonate reservoirs[J]. SPE Journal, 2005, 10(4):374-384.
|
[58] |
YAO R, JIANG G, LI W, et al. Effect of water-based drilling fluid components on filter cake structure[J]. Powder Technology, 2014, 262:51-61.
|
[59] |
YAO R, JIANG G, YE L, et al. The effect of inorganic salt on the structure of filter cake of water based drilling fluid[J]. Proceedings, 2014(01):30-38.
|
[60] |
TIEN C, BAI R, RAMARAO B V. Analysis of cake growth in cake filtration:effect of fine particle retention[J]. Aiche Journal, 1997, 43(1):33-44.
|
[61] |
Elkatatny S, Mahmoud M A, Nasr-El-Din H A. A new technique to characterize drilling fluid filter cake[C]. SPE European Formation Damage Conference, Noordwijk, The Netherlands, 2011.
|
[62] |
Zakaria M, Husein M M, Harland G. Novel nanoparticlebased drilling fluid with improved characteristics[C].SPE International Oilfield Nanotechnology Conference and Exhibition, Noordwijk, The Netherlands, 2012.
|
[63] |
蒲晓林, 黄林基, 罗兴树, 等. 深井高密度水基钻井液流变性造壁性控制原理[J]. 天然气工业, 2001, 21(6):48-51.PU Xiaolin, HUANG Linji, LUO Xingshu, et al.Principles controlling the rheologicak property and wall building property of deep well high density water base drilling fluid[J].Natural Gas Industry, 2001, 21(6):48-51.
|
[64] |
匡韶华, 蒲晓林, 柳燕丽. 超高密度水基钻井液滤失造壁性控制原理[J]. 钻井液与完井液,2010,27(5):8-11.KUANG Shaohua, PU Xiaolin, LIU Yanli. Principles of controlling wall building properties of ultra-high density water based drilling fluid[J]. Drilling Fluid & Completion Fluid, 2010, 27(5):8-11.
|
[65] |
TILLER F M. Tutorial:Interpretation of Filtration Data, I[J]. Fluid/Particle Sep. J, 1990, 3(2):85-94.
|
[66] |
STAMATAKIS K, TIEN C. Cake formation and growth in cake filtration[J]. Chemical Engineering Science, 1991, 46(8):1917-1933.
|
[67] |
张洪霞. 高密度盐水钻井液重晶石优选新方法[J]. 钻井液与完井液, 2013, 30(1):1-4.ZHANG Hongxia. Novel method of selecting barite for high-density salt drilling fluid[J]. Drilling Fluid & Completion Fluid, 2013, 30(1):1-4.
|
[68] |
BOURGOYNE A T, MILLHEIM K K, CHENEVERT M E, et al.Applied drilling engineering[M]. second (revised) printing ed., Richardson, Texas, 1991.
|
[69] |
CHRISTENSEN M L. The effect of filter cake viscoelasticity on filtration[M]. Aalborg Universitet, 2006.
|