新型堵漏材料的研制及性能评价

程鹏至; 易偲文; 梅林德; 操晶

doi:10.3969/j.issn.1001-5620.2016.03.010

新型堵漏材料的研制及性能评价

doi: 10.3969/j.issn.1001-5620.2016.03.010

成都得道实业有限公司, 成都 610041

详细信息

作者简介:
程鹏至,1987年生,毕业于西南石油大学并获硕士学位,主要从事钻井液与完井液的研究。E-mail:chengpzhi@cdddsy.com。

中图分类号: TE282
计量
- 文章访问数: 1013
- HTML全文浏览量: 238
- PDF下载量: 288
- 被引次数: 0
出版历程
- 收稿日期: 2016-02-02
- 刊出日期: 2016-05-31

The Development and Evaluation of A Set of New Lost Circulation Material

Chengdu Dedao Industrial Co., Ltd., Chengdu, Sichuan 610094

摘要

摘要: 传统堵漏材料存在一定的“缺陷”，比如矿物颗粒密度过大且脆性太强，配浆易沉降且在架桥成功后会因裂缝闭合而崩解破碎，植物颗粒密度过小配浆易漂浮，经高温高压“水煮”后会变软，贝壳片、云母片脆性太强、不易变形而容易造成“封门”。它们复配堵漏成功后，在后期作业中，易失效并发生复漏。为解决传统堵漏材料存在的缺陷，通过特殊制备工艺，研制了LCC系列堵漏材料。该材料中LCC100密度在1.30～2.30 g/cm³之间可调，在25 MPa承压破碎率小于10%，在pH值为12的NaOH溶液中，150℃下热滚48 h，强度无明显变化，具有良好的耐压、耐温、耐碱性能；LCC200刚柔相济；LCC300可在压差作用下以变形的方式深入裂缝封堵，提高封堵强度。实验结果表明，LCC对孔隙型和裂缝型漏失都有较好的封堵效果；LCC在API堵漏仪钢珠床中形成的封堵层可承受7 MPa的压力而不被压穿。以水基或油基钻井液为基液配制的LCC堵漏浆，在高温高压堵漏仪中150℃下封堵楔形裂缝时可承受20 MPa的压力而不崩漏，并最终可稳压在19.8 MPa以上。
- 井漏 /
- 堵漏材料LCC /
- 刚性颗粒 /
- 合金纤维 /
- 柔性碎片 /
- 承压堵漏
Abstract: Conventional lost circulation materials (LCM) have some "deficiencies", for example, the particles of mineral LCM have too big density and are too brittle, thus it is easy for the particles to settle down in drilling fluids, and to crush when the formation fractures are closing. The particles of plant LCM have densities that are too low for them to mix evenly with drilling fluid, and are always float at the top of the LCM slurries. These plant LCM become soft at HTHP conditions, no longer suitable for stopping mud losses. Flake LCM, such as seashells and mica, are also too brittle and the mouth of the opening of fractures are easy to be covered by these flake LCM. In subsequent operations, the flakes are eroded away, inducing mud losses to occur again. To solve these problems, a series of new LCM, the LCC series, have been developed using special techniques. In the LCC series, the LCC100 has densities adjustable between 1.30-2.30 g/cm³, and the ratio of particles broken at 25 MPa is less than 10%. After hot rolling in NaOH solution with pH 12, no obvious changes in the strength of the particles have been found, meaning that LCC100 has good pressure resistance, temperature resistance and high pH tolerance. LC200 is an LCM that is both ductile and rigid. LCC300 can make its way into fractures under pressure, strengthening the plugging and sealing of mud loss channels. It has been demonstrated that LCC series are effective in controlling mud losses into fractures and pores; they remain their integrity at a pressure of 7 MPa on API LCM tester. Oil base or water base LCM slurries made with LCC series can stand 20 MPa on HTHP LCM tester (with wedge-shaped fractures) at 150℃, without being pierced, and the pressure can be stabilized at 19.8 MPa.
- Lost circulation /
- LCC series LCM /
- Rigid particle /
- Alloy fiber /
- Flexible chip /
- Control mud losses under pressure

HTML全文

参考文献(16)

赵正国,蒲晓林,王贵,等. 裂缝性漏失的桥塞堵漏钻井液技术[J]. 钻井液与完井液,2012,29(3):44-46. ZHAO Zhengguo,PU Xiaolin,WANG Gui,et al. Study on drilling fluid bridge plugging technology for fractured formation[J].Drilling Fluid & Completion Fluid,2012,29(3):44-46.

贾利春,陈勉,张伟,等. 诱导裂缝性井漏止裂封堵机理分析[J]. 钻井液与完井液,2013,30(5):82-85. JIA Lichun,CHEN Mian,ZHANG Wei,et al.A study of induced crack lost circulation plugging mechanism[J]. Drilling Fluid & Completion Fluid, 2013, 30(5):82-85.

王贵,蒲晓林,文志明,等. 基于断裂力学的诱导裂缝性井漏控制机理分析[J]. 西南石油大学学报:自然科学版,2011,33(1):131-134. WANG Gui,PU Xiaolin,WEN Zhiming,et al. Mechanism of controlling lost circulation in induced fracture formation based on fracture mechanics[J]. Journal of Southwest Petroleum University(Science & Technology Edition),2011,33(1):131-134.

贺明敏,吴俊,蒲晓林,等. 基于笼状结构体原理的承压堵漏技术研究[J]. 天然气工业,2013,33(10):80-84. HE Mingmin,WU Jun,PU Xiaolin,et al.A study of strengthening plugging based on the cage structure theory[J].Natural Gas Industry,2013,33(10):80-84.

郑力会,张明伟. 封堵技术基础理论回顾与展望[J]. 石油钻采工艺,2012,34(5):1-9. ZHENG Lihui, ZHANG Mingwei. Review of basic theory for lost circulation control[J]. Oil Drilling & Production Technology, 2012,34(5):1-9.

谢彬强,郑力会. 基于疏水缔合聚合物的新型钻井液封堵剂[J]. 石油钻采工艺,2015,37(5):41-45. XIE Binqiang, ZHENG Lihui. A new type plugging agent for drilling fluid based on hydrophobic associative polymer[J].Oil drilling & production technology, 2015, 37(5):41-45.

张希文, 李爽, 张洁, 等.钻井液堵漏材料及防漏堵漏技术研究进展[J]. 钻井液与完井液, 2009, 26(6):74-76. ZHANG Xiwen,LI Shuang,ZHANG Jie,et al. Research progress on lost circulation materials and lost circulation control technology[J].Drilling Fluid & Completion Fluid, 2009,26(6):74-76.

徐同台,刘玉杰,申威. 钻井工程防漏堵漏技术[M]. 北京:石油工业出版社,1997. XU Tongtai,LIU Yujie,SHEN We i.Drilling engineering leak plugging technology[M].Beijing:Petroleum Industry press,1997.

侯士立,黄达全,杨贺卫,等. 刚性楔入承压封堵技术[J]. 钻井液与完井液, 2015, 32(1):49-52. HOU Shili, HUANG Daquan, YANG Hewei,et al. Study and application of rigid wedging mud loss control under pressure[J]. Drilling Fluid & Completion Fluid, 2015, 32(1):49-52.

李晓岚,苏雪霞,郑志军,等. 微裂缝封堵护壁材料FPS的制备及性能研究[J]. 钻井液与完井液, 2015,32(4):25-27. LI Xiaolan, SU Xuexia, ZHENG Zhijun, et al. Preparation and study of fracture sealing and plugging agent FPS[J]. Drilling Fluid & Completion Fluid, 2015, 32(4):25-27.

孙剑,崔茂荣,陈浩,等. 新型复合堵漏材料的研制[J]. 西南石油大学学报:自然科学版,2007,29:133-135. SUN Jian,CUI Maorong,CHEN Hao,et al.Preparation of a novel compound leakage blocking material[J]. Journal of Southwest Petroleum University(Science & Technology Edition),2007,29:133-135.

吕开河,邱正松,魏慧明,等. 自适应防漏堵漏钻井液技术研究[J]. 石油学报,2008,29(5):757-760,765. LYU Kaihe,QIU Zhengsong,WEI Huiming, et al. Study on techniques of auto-adapting lost circulation resistance and control for drilling fluid[J].Acta Petrolei Sinica,2008,29(5):757-760,765.

余维初,苏长明,黄新然,等. 高温高压动态堵漏评价系统的研制[J]. 石油天然气学报(江汉石油学院学报),2008,30(5):116-117. YU Weichu,SU Changming,HUANG Xinran,et al. Development of high temperature high pressure(HTHP) dynamic sealing evaluating system[J].Journal of Oil and Gas Technology(J.JPI).2008,30(5):116-117.

邱正松,王在明,徐加放,等. 复合堵漏材料优化实验研究及配方评价新方法[J]. 天然气工业,2006,26(11):96-98. QIU Zhengsong,WANG Zaiming,XU Jiafang,et al. Experimental research on compound LCM optimization and a new method for formula evaluation[J].Natural Gas Industry,2006,26(11):96-98.

崔云海,许明标. 水平井裂缝油基钻井液水泥浆堵漏技术[J]. 长江大学学报(自然科学版),2015,12(3):53-56. CUI Yunhai,XU Mingbiao.Cement slurry plugging technology of horizontal well fracture drilled by oil-base drilling fluid[J].Journal of Yangtze University(Natural Science Edition),2015,12(3):53-56.

修留永, 贾平军,高学生,等.LXC-005井胶质复合堵漏材料水泥浆堵漏技术[J]. 石油钻采工艺,2004,26(5):32-34. XIU Liuyong,JIA Pingjun,GAO Xuesheng,et al. Plugging technology using colloid composite cement slurry in well lxc-005[J].Oil Drilling & Production Technology,2004,26(5):32-34.

施引文献

资源附件(0)

访问统计