Development and Evaluation of a High Density Drilling Fluid Lubricant
-
摘要: 针对高密度钻井液对润滑性能的要求,采用多元醇、含双键的长链脂肪酸、矿物原料等为原料合成一种高密度钻井液用润滑剂SMJH-1,其为一种接入具有极压抗摩能力化学元素的大分子酯。性能评价结果表明,润滑剂SMJH-1加量为1%、2%和3%时,润滑系数降低率为24.2%、33.6%、38.3%,具有良好的润滑性,抗温达180℃,抗盐达30%,对密度为1.4~2.0 g/cm3的高密度钻井液在150℃、16 h老化前后流变性能影响较小,并有助于高温高压滤失量的控制。SMJH-1通过物理化学吸附作用和侧向黏附力在钢质表面形成固态膜,增强表面的疏水性,控制流动界面内的固有涡流,减少摩阻压力。该润滑剂在元陆601H和元陆31井进行了试验应用,取得较好的润滑效果。Abstract: A high density drilling fluid lubricant, SMJH-1, was developed using polyalcohol, long-chain fatty acids with double bonds in their molecules, and natural minerals. SMJH-1 is a high molecular weight ester with ability to reduce extreme pressure friction. Drilling fluids treated with 1%, 2% and 3% SMJH-1 have coefficient of friction reduced by 24.2%, 33.6% and 38.3%, respectively. SMJH-1 functions at 180℃ and in drilling fluids contaminated with 30% salt. SMJH-1 reduces the HTHP filter loss of drilling fluids with density between 1.4 g/cm3 and 2.0 g/cm3, while only slightly affects their rheology. SMJH-1 can spread on the surface of steel, forming a solid film by physico-chemical adsorption and lateral adhesion, hence enhancing the hydrophobicity of the surface and controlling the vortices in the flowing fluid. In this way the friction between fluid and solid surface is reduced. SMJH-1 has been tried in the drilling of the Well Yuanlu-601H and Yuanlu-301, and proved successful.
-
Key words:
- High density drilling fluid /
- Lubricant /
- Drilling fluid additive /
- High temperature /
- Salt resistant /
- Synthesis
-
丁彤伟,鄢捷年,冯杰. 抗高温高密度水基钻井液体系的室内实验研究[J]. 中国石油大学学报(自然科学版),2007,(2):73-78. Ding Tongwei,Yan Jienian,Feng Jie. Experimental study on water-based drilling fluids resisting high temperature with high density[J]. Journal of China University of Petroleum(Edition of Natural Science), 2007,(2):73-78. 艾贵成, 王卫国,张宝峰. 深井高温高密度钻井液润滑性控制技术[J]. 西部探矿工程,2009,21(6):42-44. Ai Guicheng, Wang Weiguo, Zhang Baofeng. The lubricity management technology of high-temperature high-density drilling fluid in deep well[J]. West-China Exploration Engineering,2009,21(6):42-44. 吴新民, 林龙波, 张喜凤. 加重剂对水基钻井液润滑性能影响的实验研究[J]. 石油钻采工艺, 2013, 35(1):37-39. Wu Xinmin, Lin Longbo, Zhang Xifeng, et al. Experimental study on the influence of weighting additives on lubricity of water-based drilling fluids[J]. Oil Drilling & Production Technology,2013,35(1):37-39. 李家龙.钻井液用防塌润滑剂FRH-B的研究与应用[J]. 油田化学,1997,14(4):295-298. Li Jialong.Caving preventative/lubricator FRH-B for drilling fluids:research and uses[J].Oilfield Chemistry, 1997,14(4):295-298. Bohner G E, Krimmel J A, Schmidt-Collerus J J,et al. Properties of polyester fluids with desirable synthetic lubricant characteristics[J]. Journal of Chemical & Engineering Data, 1962,7(4):547-553. Knox D, Jiang P. Drilling further with water-based fluids-Selecting the right lubricant[C].SPE 92002,2005. Fisk J V, Kerchevile J D, Pober K W. Silicic acid mud lubricants:US,6989352 B2[P]. 2006-6-24. 解洪祥, 王绪美, 赵福祥,等. 钻井液用泥饼黏附润滑剂BH-MAL的研究[J]. 钻井液与完井液,2014,31(5):22-24. Xie Hongxiang,Wang Xumei,Zhao Fuxiang,et al. Study on a new drilling fluid lubricant BH-MAL[J]. Drilling Fluid & Completion Fluid,2014,31(5):22-24. 史沛谦, 王晴, 张红卫,等. 双吸附基润滑剂SR-1的研制及其作用机理探讨[J]. 钻井液与完井液,2015, 32(1):30-33. Shi Peiqian, Wang Qing, Zhang Hongwei, et al. Development and evaluation of a dual adsorption base lubricant SR-1[J].Drilling Fluid & Completion Fluid, 2015,32(1):30-33. 郑义平,黄治中,张兴国,等. 钻井液用生物油润滑剂的研究与应用[J]. 钻井液与完井液, 2013,30(4):19-20,24. Zheng Yiping, Huang Zhizhong, Zhang Xingguo, et al. Research and application of biodiesel lubricant used for drilling fluid[J].Drilling Fluid & Completion Fluid, 2013,30(4):19-20,24. 邱正松, 王伟吉, 黄维安, 等. 钻井液用新型极压抗磨润滑剂SDR的研制及评价[J]. 钻井液与完井液, 2013, 30(2):12-15. Qiu Zhengsong, Wang Weiji, Huang Weian, et al. Research and evaluation of novel anti-wear extremepressure lubricant SDR used for drilling fluid[J]. Drilling Fluid & Completion Fluid, 2013,30(2):12-15. 祁亚男,吕振华,严波,等. 新型植物油钻井液润滑剂的研究与应用[J]. 钻井液与完井液,2015,32(3):39-41. Qi Ya'nan, LYU Zhenhua,Yan Bo,et al.Study and application of new vegetable lubricant used in drilling fluid[J]. Drilling Fluid & Completion Fluid,2015,32(3):39-41.
点击查看大图
计量
- 文章访问数: 907
- HTML全文浏览量: 253
- PDF下载量: 216
- 被引次数: 0