Evaluation and Analysis of Commonly Used Sulfonated Phenolic Resins
-
摘要: 通过红外光谱、浊点盐度和黏均分子量分别验证了SMP-Ⅱ与SMP-Ⅲ的分子基团、抗盐性能和分子量大小。利用电镜扫描分析了2种产品水溶液以及与重晶石作用情况,测试了他们在钻井液中的性能,讨论了他们与黏土和其他处理剂复配后的效果及作用机理。实验结果表明,SMP-Ⅱ、SMP-Ⅲ在基团、抗盐性方面无明显差异,但SMP-Ⅱ的吸附能力较SMP-Ⅲ强;SMP-Ⅲ在单独使用时,高温高压滤失量为17.5 mL,而SMP-Ⅱ与SMC复配后的高温高压滤失量为20 mL;高温和高盐促使SMP-Ⅱ、SMP-Ⅲ自身以及与SMC等处理剂适度交联,形成的大分子聚合物析出后具有很强的护胶能力,能有效吸附黏土颗粒改善泥饼质量,从而达到降失水的效果。同时确定该类产品最优加量为5%。Abstract: Two commonly used sulfonated phenolic resins, SMP-Ⅱ and SMP-Ⅲ, were tested for their molecular structures, saltresistance, molecular weights, and their capacities in rheology control. SMP-Ⅲ can control the HTHP filter loss of drilling fluid to 17.5 mL, while SMP-Ⅱ, when used with SMC, a sulfonated lignite, can control the HTHP filter loss to 20 mL. High temperature and high salinity push forward the modest crosslinking of SMP-Ⅱ or SMP-Ⅲ itself, or the crosslinking of SMP-Ⅱ(or SMP-Ⅲ) and SMC, producing high molecular weight copolymers that are effective in rheology control. The copolymers, by adsorbing onto the surfaces of clay particles, improve the quality of filter cakes, reducing filtration of drilling fluid. The optimum treatment of SMP-Ⅱ or SMP-Ⅲ is determined to be about 5%.
-
张高波,王善举,郭民乐. 对磺化酚醛树脂生产应用的认识[J]. 钻井液与完井液,2000,17(3):21-23. Zhan g Gaobo,Wang Shanju,Guo Min l e.Some understandings on the production and application of sulfaonated phenolaldehyde resin[J].Drilling fluid & completion fluid,2000,17(3):21-23. SYT 5094-2008钻井液用磺甲基酚醛树脂[S]. 国家发展改革委员会,2008. SYT 5094-2008 Sulfonated methyl pheuo-formaldehyde used in drilling fluids[S].National Development and Reform Commission,2008. GB12005.1-89聚丙烯酞胺特性黏数测定方法[S].2005. GB12005.1-89 determination for limiting viscosity number of polyacrylamide[S].2005. 王平全,罗平亚. 三磺处理剂高温交联对泥浆性能的影响[J]. 天然气工业,1992,12(5):49-51. Wang Pingjin,Luo Pingya.Influence of high temperature crosslinkage of smp,smk and smc mud conditioners on mud properties and a study on their application[J].Natural Gas Industry,1992,12(5):49-51. 鄢捷年,罗平亚. 抗高温抗盐失水控制剂——磺甲基酚醛树脂(SMP)作用机理的研究[J]. 石油钻采工艺, 1982,2:81-83. Yan Jienian,Luo Pingya.Study on mechanisms of heat and salinity tolerance fluid loss agent——SMP[J].Oil Drilling & Production Technology,1982,2:81-83. 张敬春. 磺甲基酚醛树脂质量控制、高温交联及起泡机理研究[D]. 北京:中国石油大学,2010. Zhang Jingchun.Study on Quality Control,high temperature crosslinking and foaming mechanism of sulfomethylated phenolic resin[D].Peking:China University of Petroleum, 2010. 刘鹭,蒲晓林,苏俊霖,等. 磺甲基酚醛树脂抗温性能研究[J]. 应用化工,2013,42(09):1576-1577. Liu Lu,Pu Xiaolin,Su Junlin,et al.Research on the temperature resistance of sulfonated phenolic resin[J].Applied Chemical Industry,2013,42(09):1576-1577. 陈德军,雒和敏,铁成军,等.钻井液降滤失剂研究述论[J]. 油田化学,2013,30(2):295-298. Chen Dejun,Luo Hemin,Tie Chengjun,et al.Summary on fluid loss additive used for drilling fluids[J].Oilfield Chemistry,2013,30(2):295-298. 朱宽亮,王富华,徐同台,等. 抗高温水基钻井液技术研究与应用现状及发展趋势(Ⅱ)[J]. 钻井液与完井液, 2009,26(6):56-64. Zhu Kuanliang,Wang Fuhua,Xu Tong tai,et al.Status in quo and progress(Ⅱ):study and application of high temperature drilling fluids[J].Drilling Fluid & Completion Fluid,2009,26(6):56-64. -

计量
- 文章访问数: 1003
- HTML全文浏览量: 232
- PDF下载量: 561
- 被引次数: 0