Volume 38 Issue 3
Sep.  2021
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2021  >  38(3): 380-384
MENG Xuangang, WU Wen, PENG Fen, YANG Zhanwei, WANG Liao, GAO Ying, WANG Liwei. Analysis and Countermeasures of Corrosion Cracking of an Oil Pipe[J]. DRILLING FLUID & COMPLETION FLUID, 2021, 38(3): 380-384. doi: 10.3969/j.issn.1001-5620.2021.03.021
Citation: MENG Xuangang, WU Wen, PENG Fen, YANG Zhanwei, WANG Liao, GAO Ying, WANG Liwei. Analysis and Countermeasures of Corrosion Cracking of an Oil Pipe[J]. DRILLING FLUID & COMPLETION FLUID, 2021, 38(3): 380-384. doi: 10.3969/j.issn.1001-5620.2021.03.021
shu

Analysis and Countermeasures of Corrosion Cracking of an Oil Pipe

doi: 10.3969/j.issn.1001-5620.2021.03.021

  • 1. Science and Technology Information and Management Department of Yanchang Co., Ltd. Yan'an, Shaanxi 716000;

  • 2. Development Division of PetroChina Southwest Oil and Gas Field Branch Company, Chengdu, Sichuan 610000;

  • 3. Oil and Gas Engineering Research Institute of Tarim Oilfield Company, Korla Xinjiang 841000;

  • 4. PetroChina Exploration and Development Research Institute Split Center Beijing Haidian, Beijing 100083

  • Received Date: 2021-01-30
    Abstract
  • Existing acid corrosion inhibitors are ineffective to eliminate the stress corrosion of acidic high-concentration brines on super 13Cr material oil pipes under high temperature environments. In actual production applications, stress corrosion cracking is caused, and new corrosion inhibitors need to be developed to solve high temperature acids and high temperatures. Stress corrosion of acidic high concentration brine. Based on the research on the corrosion inhibition mechanism of existing corrosion inhibitors, the shortcomings are analyzed, and the corrosion inhibition mechanism of polymerized film formation is proposed, that is, some compounds are used to react with each other under certain conditions in an acid environment to produce a solution containing at least 2 An intermediate product of an active functional group can quickly form a polymer film on the metal surface. Based on this theory, a new type of corrosion inhibitor was developed, which was tested by a high-temperature and high-pressure dynamic corrosion rate measuring instrument. At 180℃, the minimum corrosion rate of 15% hydrochloric acid was 16.0 g/m2·h; four-point bending test confirmed that the corrosion inhibitor was significantly eliminated The stress corrosion cracking of the super 13Cr material test piece produced by acidic high-concentration brine in a high-temperature environment. The new corrosion inhibitor can effectively reduce the stress corrosion cracking of super 13Cr material tubing in ultra-deep high temperature and high pressure gas wells.

     

    • FullText(HTML)
  • loading
    • References(16)
  • [1]
    马磊,岳小琪,赵密锋,等. 油套管钢在甲酸盐-磷酸盐复配完井液中的腐蚀行为[J]. 钻井液与完井液, 2020,37(3):398-404.

    MA Lei,YUE Xiaoqi,ZHAO Mifeng,et al.The corrosion behavior of tubing and casing steel in formatephosphate compound completion fluid[J]. Drilling Fluid & Completion Fluid,2020,37(3):398-404.
    [2]
    雷群,胥云,杨战伟,等. 超深油气储集层改造技术进展与发展方向[J]. 石油勘探与开发,2021,48(1):193-201.

    LEI Qun,XU Yun,YANG Zhanwei, et al. Progress and development direction of ultra-deep oil and gas reservoir stimulation technology[J].Petroleum Exploration and Development,2021,48(1):193-201.
    [3]
    寇菊荣,董仁,刘洪涛,等. 超级13Cr完井管柱的腐蚀失效原因[J]. 腐蚀与防护,2015,33(9):898-902.

    KOU Jurong,DONG Ren,LIU Hongtao,et al. Corrosion failure causes of super 13Cr completion strings[J]. Corrosion & Protection,2015,33(9):898-902.
    [4]
    伍林,王世彬,雷跃雨. 超高温瓜胶压裂液加重性能研究[J]. 重庆科技学院学报(自然科学版),2011,13(1):98-100,116.

    WU Lin,WANG Shibin,LEI Yueyu.Study on the aggravating performance of ultra-high temperature guar gum fracturing fluid[J].Journal of Chongqing University of Science and Technology (Natural Science Edition), 2011, 13(1):98-100,116.
    [5]
    杨向同,肖伟伟,刘洪涛,等. 甲酸盐对套管/油管腐蚀速率评价方法与影响因素[J]. 钻井液与完井液, 2016,33(6):51-57.

    YANG Xiangtong,XIAO Weiwei,LIU Hongtao,et al. Method of Evaluating corrosion rate of formats to casing and tubing strings and the influencing factors[J].Drilling Fluid & Completion Fluid,2016,33(6):51-57.
    [6]
    单广斌,迟立鹏,李贵军,等. 黑水环境中氯离子浓度对不锈钢应力腐蚀开裂敏感性的影响[J]. 腐蚀与防护, 2019,40(11),796-798.

    SHAN Guangbin,CHI Lipeng,LI Guijun,et al. Effect of chloride concentration on stress corrosion cracking susceptibility of stainless steel in black water[J]. Corrosion & Protection, 2019,40(11),796-798.
    [7]
    董永刚,张营,裴海华. 耐高温NaBr加重压裂液的研究[J]. 当代化工,2016,45(3):441-446.

    DONG Yonggang,ZHANG Ying,PEI Haihua. Research of heat-resistant sodium bromide weighted fracturing fluid[J]. Contemporary Chemical Industry, 2016, 45(3):441-446.
    [8]
    何世云. 抗180℃高温低腐蚀酸液体系构建及应用[J]. 钻井液与完井液,2020,37(2):244-249.

    HE Shiyun.Optimization of a high temperature low corrosivity acid fluid for application at 180℃ high temperature[J].Drilling Fluid & Completion Fluid,2020, 37(2):244-249.
    [9]
    宗鹏. 季铵盐型酸化缓蚀剂的合成及其缓蚀机理研究[D] 青岛:中国石油大学,2008.

    ZONG Peng.Synthesis of quaternary ammonium salt acidification corrosion inhibitor and its corrosion inhibition mechanism[D] Qingdao:China University of Petroleum,2008.
    [10]
    艾俊哲,段立东,王欢. 咪唑啉固体缓蚀剂的溶解性能及缓蚀性能[J]. 腐蚀与防护,2019,40(10):740-746.

    AI Junzhe,DUAN Lidong,WANG Huan.Solubility and corrosion inhibition performance of imidazoline inhibitor[J].Corrosion&Protection,2019,40(10):740-746.
    [11]
    邵明鲁,岳湘安. 新型双季铵盐缓蚀剂的合成与性能评价[J]. 腐蚀与防护,2019,40(10):747-752.

    SHAO Minglu,YUE Xiangan.Synthesis and property evaluation of a new double quaternary ammonium salt as corrosion inhibitor[J].Corrosion&Protection, 2019,40(10):747-752.
    [12]
    李军,张镇,王云云,等. 吡啶季铵盐型中高温酸化缓蚀剂的合成与性能评价[J]. 石油化工应用,2017, 36(9):120-123.

    LI Jun,ZHANG Zhen,WANG Yunyun, et al. Synthesis and performance evaluation of pyridinium quaternary ammonium salt type medium and high temperature acidification corrosion inhibitor[J].Petrochemical Industry Application,2017,36(9):120-123.
    [13]
    张朔,吕选鹏,刘德正,等. 一种新型高温酸化缓蚀剂的制备及其应用[J]. 钻井液与完井液,2017,34(5):100-105.

    ZHANG Shuo,LYU Xuanpeng,LIU Dezheng, et al. Study and application of a new corrosion inhibitor for high temperature acidization[J].Drilling Fluid&Completion Fluid,2017,34(5):100-105.
    [14]
    中国石油天然气总公司.SY/T 5405-1996酸化用缓蚀剂性能实验方法及评价指标[S]. 北京:石油工业标准化技术委员会,1996. China National Petroleum Corporation. SY/T 5405-1996 Acidizing corrosion inhibitor performance test method and evaluation index[S].Beijing:Petroleum Industry Standardization Technical Committee, 1996.
    [15]
    战风涛,杨震,吕志凤,等. 高效缓蚀性氯化苄基喹啉衍生物制备与表征[J].石油学报,2015,36(9):1116-1121.

    ZHAN Fengtao,YANG Zhen,LYU Zhifeng,et al. Preparation and characterization of N-benzylquinolinium chlorinated derivative(BQD) with effective corrosion inhibition[J].Acta Petrolei Sinica,2015,36(9):1116-1121.
    [16]
    赵国仙,高飞.TC4钛合金在有机盐完井液中的腐蚀性能[J]. 钻井液与完井液,2020,37(2):264-268.

    ZHAO Guoxian,GAO Fei.Anti-Corrosion behavior of TC4 alloy in organic salt completion fluid[J]. Drilling Fluid & Completion Fluid,2020,37(2):264-268.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (350) PDF downloads(22) Cited by()
    Proportional views
    Related

    Copyright 《Drilling Fluid & Completion Fluid》津ICP备13002319号-1

    Address：Editorial Department of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei ProvinceChina Pos：062552

    Tel：（0317）2725487　2722354Email：zjyywjy@126.com

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return