Volume 38 Issue 2
Aug.  2021
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2021  >  38(2): 212-217
YAN Junfeng, WU Jinsheng, JIANG Bing, WANG Yongming, LIU Jianjun. Development of a Device for Evaluating Lost Circulation Materials at High Temperature High Pressure[J]. DRILLING FLUID & COMPLETION FLUID, 2021, 38(2): 212-217. doi: 10.3969/j.issn.1001-5620.2021.02.014
Citation: YAN Junfeng, WU Jinsheng, JIANG Bing, WANG Yongming, LIU Jianjun. Development of a Device for Evaluating Lost Circulation Materials at High Temperature High Pressure[J]. DRILLING FLUID & COMPLETION FLUID, 2021, 38(2): 212-217. doi: 10.3969/j.issn.1001-5620.2021.02.014
shu

Development of a Device for Evaluating Lost Circulation Materials at High Temperature High Pressure

doi: 10.3969/j.issn.1001-5620.2021.02.014

  • 1. Institute of prospecting technology, Chinese Academy of Geological Sciences, Chengdu, Sichuan 611734;

  • 2. Haian Petroleum Research Instrument Co., Ltd., Nantong, Jiangsu 226681

  • Received Date: 2020-11-03
    Abstract
  • A device (Model DL-3A) used for evaluating the performance of lost circulation materials at high temperature and high pressure was developed to simulate the deep sea HTHP working environment in which mud losses occur and are being stopped. Relevant literatures at home and abroad were consulted when determining the structure and working principle of the device. This paper explains the operating procedures and the major operating parameters of the device. Test of the device were performed using two bridging LCMs. The test results showed that the testing container and the testing modules of the Model DL-3A device can be heated to 260 ℃ and maintain this temperature, the plugging and flowback pressures can reach and maintain at 10 MPa or higher, indicating that the Model DL-3A device can be used to simulate the HTHP conditions encountered in deep water drilling. The testing results of lost circulation materials with this device can provide a certain reference for performing mud loss control in field operations.

     

    • FullText(HTML)
  • loading
    • References(16)
  • [1]
    徐同台, 刘玉杰, 申威, 等. 钻井工程防漏堵漏技术[M]. 北京:石油工业出版社, 1997:69-71. XU Tongtai, LIU Yujie, SHEN Wei, et al. Lost circulation prevention and plugging technology in drilling engineering[M]. Beijing:Petroleum Industry Press, 1997:69

    -71.
    [2]
    王君国. DS-2型堵漏材料实验装置[J]. 探矿工程, 1983(4):58-59. WANG Junguo. DS-2

    plugging material test device[J]. Exploration Engineering, 1983(4):58-59.
    [3]
    杨天成, 高强. DLY-160堵漏模拟实验装置及应用[J]. 钻采工艺, 1993, 16(2):76-79.

    YANG Tiancheng, GAO Qiang. Dly-160 leak blocking simulation test device and its application[J].Drilling & Production Technology, 1993, 16(2):76-79.
    [4]
    郭宝利, 袁孟雷, 孟尚志, 等. 一种新型堵漏模拟装置[J]. 钻井液与完井液, 2003, 20(4):47-49.

    GUO Baoli, YUAN Menglei, MENG Shangzhi, et al. A novel lost circulation simulator[J]. Drilling Fluid & Completion Fluid, 2003, 20(4):47-49.
    [5]
    胡三清. JLX-2动态堵漏实验仪的研制[J]. 石油机械, 2000, 28(6):13-15.

    HU Sanqing. Model JLX-2 dynamic loss plugging tester[J]. China Petroleum Machinery, 2000, 28(6):13-15.
    [6]
    王德玉, 蒲晓林, 施太和, 等. DL-1型堵漏实验装置及评价方法[J]. 石油钻采工艺, 1996, 18(5):44-48.

    WANG Deyu, PU Xiaolin, SHI Taihe, et al. Introduction and evaluation of mode DL-1 device for lost circulation control[J]. Oil Drilling & Production Technology, 1996, 18(5):44-48.
    [7]
    杨争, 谭敏. DL-2H堵漏仪自动控制设计与应用[J]. 复杂油气藏, 2010, 3(3):84-86.

    YANG Zheng, TAN Ming. Design of automatic control for DL-2Hlost circulation evaluation device and its application[J]. Complex Hydrocarbon Reservoirs, 2010, 3(3):84-86.
    [8]
    刘振东. 钻井漏失层位测量及堵漏模拟研究[J]. 钻探工程(探矿工程-岩土钻掘工程), 2015, 42(8):13-16. LIU Zhendong. Stimulation of drilling leakage zone measurement and plugging[J]. Drilling Engineering (Exploration Engineering-Rock & Soil Drilling and Tuneling), 2015, 42(8):13-16.
    [9]
    余维初, 苏长明, 鄢捷年. 高温高压动态堵漏评价系统[J]. 钻井液与完井液, 2009, 26(1):20-22.

    YU Weichu, SU Changming, YAN Jienian. HTHP dynamic system for lost circulation evaluation[J]. Drilling Fluid & Completion Fluid, 2009, 26(1):20-22.
    [10]
    郭宝利, 袁孟雷. 钻井堵漏模拟实验装置:ZL 02243296.5[P]. 2002-07-23. GUO Baoli, YUAN Menglei. Drilling plugging simulation test device:ZL 02243296.5[P]. 2002-07-23.
    [11]
    冯学荣. 组合型裂缝漏床及其模拟堵漏实验方法的探索[J]. 钻采工艺, 2004, 27(6):14-18.

    FENG Xuerong. Combined fracture model & the methods of its simulation sealing experiment[J]. Drilling & Production Technology, 2004, 27(6):14-18.
    [12]
    窦斌, 舒尚文, 郭建华, 等. 高保真模拟漏失地层堵漏评价实验装置设计[J]. 石油机械, 2009, 37(11):5-7.

    DOU Bin, SHU Shangwen, GUO Jianhua, et al. Test device of hi-fi simulation thief formation for leakage plugging evaluation[J]. China Petroleum Machinery, 2009, 37(11):5-7.
    [13]
    蒋振新, 孟胡, 熊超, 等. 模拟环空流动状态的堵漏实验装置设计[J]. 石油机械, 2019, 47(9):44-49.

    JIANG Zhenxin, MENG Hu, XIONG Chao, et al. Design of lost circulation control test device simulating annulus flow[J]. China Petroleum Machinery, 2019, 47(9):44-49.
    [14]
    刘人. 袖珍仿真堵漏实验装置[J]. 钻采工艺, 1995, 18(1):110. LIU Ren. Pocket simulation plugging test device[J]. Drilling & Production Technology, 1995

    , 18(1):110.
    [15]
    段明祥, 张献丰, 张全明, 等. 钻井液用BDY-1便携式堵漏仪[J]. 钻井液与完井液, 2002, 19(2):30-32.

    DUAN Mingxiang, ZHANG Xianfeng, ZHANG Quanming, et al. A portable lost circulation evaluation device BDY-1[J]. Drilling Fluid & Completion Fluid, 2002, 19(2):30-32.
    [16]
    杨振杰, 张玉强, 吴伟, 等. XAD-D新型堵漏评价实验仪研究与应用[J]. 钻井液与完井液, 2010, 27(1):44-46.

    YANG Zhenjie, ZHANG Yuqiang, WU Wei, et al. Study and application of the model XAN-D lost circulation tester[J]. Drilling Fluid & Completion Fluid, 2010, 27(1):44-46.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (362) PDF downloads(35) Cited by()
    Proportional views
    Related

    Copyright 《Drilling Fluid & Completion Fluid》津ICP备13002319号-1

    Address：Editorial Department of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei ProvinceChina Pos：062552

    Tel：（0317）2725487　2722354Email：zjyywjy@126.com

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return