Volume 36 Issue 4
Aug.  2019
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2019  >  36(4): 407-413
WU Yuanpeng, TIAN Yingpei, LUO Pingya, LIN Yuanhua. Preparation of Nanoparticle Calcium Carbonate and Study of Its Use in Water Base Drilling Fluids[J]. DRILLING FLUID & COMPLETION FLUID, 2019, 36(4): 407-413. doi: 10.3969/j.issn.1001-5620.2019.04.002
Citation: WU Yuanpeng, TIAN Yingpei, LUO Pingya, LIN Yuanhua. Preparation of Nanoparticle Calcium Carbonate and Study of Its Use in Water Base Drilling Fluids[J]. DRILLING FLUID & COMPLETION FLUID, 2019, 36(4): 407-413. doi: 10.3969/j.issn.1001-5620.2019.04.002
shu

Preparation of Nanoparticle Calcium Carbonate and Study of Its Use in Water Base Drilling Fluids

doi: 10.3969/j.issn.1001-5620.2019.04.002

  • 1. School of Materials Science and Engineering, Southwest Petroleum University, Chengdu, Sichuan 610500;

  • 2. State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Chengdu, Sichuan 610500

  • Received Date: 2019-05-05
  • Publish Date: 2019-08-30
    Abstract
  • To improve the rheology and filtration property of water base drilling fluids, a nanoparticle calcium carbonate surface modified with anionic polyacrylamide (APAM), CaCO3/APAM, has been prepared through surface in-situ polymerization. The CaCO3/APAM was characterized using FTIR and SEM to determine its molecular structures. In laboratory experiment, a water base drilling fluid treated with CaCO3/APAM had increased viscosity at low shear rate, indicating that the addition of CaCO3/APAM is helpful in improving the shear-thinning property of water base drilling fluids. At 80℃, a water base drilling fluid treated with 1% CaCO3/APAM had flow index of 0.72, yield point of 0.45 Pa and filter loss of 22.2 mL, three properties that were better than those of the base fluid. Addition of 1% CaCO3/APAM in a water base drilling fluid containing 1% salt reduced the filter loss of the drilling fluid by 21.2%. Analysis of the micro-structure of the mud cake showed that the nanoparticles, by filling into the spaces among the particles forming the mud cakes, improved the compactness of the mud cakes, thereby reducing the filter loss of the mud.

     

    • FullText(HTML)
  • loading
    • References(20)
  • [1]
    马成云, 宋碧涛, 徐同台, 等. 钻井液用纳米封堵剂研究进展[J]. 钻井液与完井液, 2017, 34(1):1-8.

    MA Chengyun, SONG Bitao, XU Tongtai, et al. Progresses in studying drilling fluid nano material plugging agents[J]. Drilling Fluid & Completion Fluid, 2017, 34(1):1-8.
    [2]
    郑淑杰, 蒋官澄, 肖成才, 等. 纳米材料钻井液在大港油田的应用[J]. 钻井液与完井液, 2017, 34(5):14-19.

    ZHENG Shujie, JIANG Guancheng, XIAO Chengcai, et al. Application of a nanomaterial drilling fluid in Dagang oilfeld[J]. Drilling Fluid & Completion Fluid, 2017, 34(5):14-19.
    [3]
    RAFATI R, SMITH S R, HADDAD A S, et al. Effect of nanoparticles on the modifications of drilling fluids properties:A review of recent advances[J]. Journal of Petroleum Science and Engineering, 2018, 161:61-76.
    [4]
    刘凡, 蒋官澄, 王凯, 等. 新型纳米材料在页岩气水基钻井液中的应用研究[J]. 钻井液与完井液, 2018, 35(1):27-33.

    LIU Fan, JIANG Guancheng, WANG Kai, et al. Research on application of a novel nanophase material in water base drilling fluids for shale drilling[J]. Drilling Fluid & Completion Fluid, 2018, 35(1):27-33.
    [5]
    曲建峰, 邱正松, 郭保雨, 等. 氧化石墨烯新型抗高温降滤失剂的合成与评价[J]. 钻井液与完井液, 2017, 34(4):9-14.

    QU Jianfeng, QIU Zhengsong, GUO Baoyu, et al. Synthesis and evaluation of a new graphene oxide high temperature flter loss reducer[J]. Drilling Fluid & Completion Fluid, 2017, 34(4):9-14.
    [6]
    FAZELABDOLABADI B, KHODADADI A, SEDAGHATZADEH M. Thermal and rheological properties improvement of drilling fluids using functionalized carbon nanotubes[J]. Applied Nanoscience, 2015, 5(6):651-659.
    [7]
    SADEGHALVAAD M, SABBAGHI S. The effect of the TiO 2/polyacrylamide nanocomposite on water-based drilling fluid properties[J]. Powder Technology, 2015, 272:113-119.
    [8]
    田惠, 曹洪昌, 马樱, 等. 水基钻井液用抗高温降滤失剂的合成及性能评价[J]. 钻井液与完井液, 2015, 32(2):34-38.

    TIAN Hui, CAO Hongchang, MA Ying, et al. Synthesis and evaluation of high temperature filter loss reducer for water-based drilling fluid[J].Drilling Fluid & Completion Fluid, 2015, 32(2):34-38.
    [9]
    CAI Guobin, ZHAO Guixia, WANG Xiangke, et al. Synthesis of polyacrylic acid stabilized amorphous calcium carbonate nanoparticles and their application for removal of toxic heavy metal ions in water[J]. Journal Physical Chemistry C, 2010, 114:12948-12954.
    [10]
    KOSMULSKI M, MACZKA E, MARCZEWSKA B K, et al. Electrokinetic potentials of mineral oxides and calcium carbonate in artificial seawater[J]. Marine Pollution Bulletin, 2003, 46(1):120-122.
    [11]
    杨丽丽, 杨潇, 蒋官澄, 等. 含离子液体链段抗高温高钙降滤失剂[J]. 钻井液与完井液,2018,35(6):8-14.

    YANG Lili, YANG Xiao, JIANG Guancheng, et al. A high temperature calcium resistant filter loss reducer containing ionic liquid segments[J].Drilling Fluid & Completion Fluid, 2018, 35(6):8-14.
    [12]
    HUO Jinhua, PENG Zhigang, YE Zhongbin, et al. Investigation of synthesized polymer on the rheological and filtration performance of water-based drilling fluid system[J]. Journal of Petroleum Science and Engineering, 2018, 165:655-663.
    [13]
    JUNG Y, SON Y H, LEE J K, et al. Rheological behavior of clay nanoparticle hybrid-added bentonite suspensions:specific role of hybrid additives on the gelation of clay-based fluids[J]. ACS Applied Materials and Interfaces, 2011, 3(9):3515-3522.
    [14]
    AFTAB A, ISMAIL A R, KHOKHAR S, et al. Novel zinc oxide nanoparticles deposited acrylamide composite used for enhancing the performance of waterbased drilling fluids at elevated temperature conditions[J]. Journal of Petroleum Science and Engineering, 2016, 146:1142-1157.
    [15]
    RUDYAK V, BELKIN A A, TOMILINA E A, et al. Nanoparticle friction force and effective viscosity of nanosuspensions[C]//Defect and Diffusion Forum, 2008.
    [16]
    SAMI N A. Effect of magnesium salt contamination on the behavior of drilling fluids[J]. Egyptian Journal of Petroleum, 2016, 25(4):453-458.
    [17]
    SU J, CHU Q, REN M. Properties of high temperature resistance and salt tolerance drilling fluids incorporating acrylamide-2-acrylamido-2-methyl-1-propane sulfonic acid/N-vinylpyrrolidone/dimethyl diallyl ammonium chloride quadripolymer as fluid loss additives[J]. Journal of Polymer Engineering, 2014, 34(2):153-159.
    [18]
    MAHTO V, SRIKANTH P, VAMSI K B. Development of non-damaging and inhibitive water based oil well drilling fluids[J]. Petroleum Science and Technology, 2013, 31(7):721-726.
    [19]
    HASSIBAL K J, AMANI M. The effect of salinity on the rheological properties of water based mud under high pressures and high temperatures for drilling offshore and deep wells[J]. Earth Science Research, 2013, 2(1).
    [20]
    AHMAD H M, KMAML M S,, AL-HARTHI M A. High molecular weight copolymers as rheology modifier and fluid loss additive for water-based drilling fluids[J]. Journal of Molecular Liquids, 2018, 252:133-143.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (702) PDF downloads(382) Cited by()
    Proportional views
    Related

    Copyright 《Drilling Fluid & Completion Fluid》津ICP备13002319号-1

    Address：Editorial Department of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei ProvinceChina Pos：062552

    Tel：（0317）2725487　2722354Email：zjyywjy@126.com

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return