Volume 35 Issue 1
Jan.  2018
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2018  >  35(1): 34-37
QU Yuanzhi, HUANG Hongjun, WANG Bo, FENG Xiaohua, SUN Siwei. Development of Extreme Pressure Anti-wear Lubricant MPA for Water Base Drilling Fluids[J]. DRILLING FLUID & COMPLETION FLUID, 2018, 35(1): 34-37. doi: 10.3969/j.issn.1001-5620.2018.01.006
Citation: QU Yuanzhi, HUANG Hongjun, WANG Bo, FENG Xiaohua, SUN Siwei. Development of Extreme Pressure Anti-wear Lubricant MPA for Water Base Drilling Fluids[J]. DRILLING FLUID & COMPLETION FLUID, 2018, 35(1): 34-37. doi: 10.3969/j.issn.1001-5620.2018.01.006
shu

Development of Extreme Pressure Anti-wear Lubricant MPA for Water Base Drilling Fluids

doi: 10.3969/j.issn.1001-5620.2018.01.006

  • 1. CNPC Drilling Research Institute, Beijing 102206;

  • 2. China University of Petroleum(Beijing), Beijing 102249;

  • 3. Research Institute of Engineering Technology of CNPC Bohai Drilling Engineering Company Limited, Dagang, Tianjin 300280

  • Received Date: 2017-08-20
  • Publish Date: 2018-01-30
    Abstract
  • An extreme pressure organic sulfur anti-wear additive has been developed for use in water base drilling fluids. Structural characteristics and extreme pressure anti-wear performance evaluation showed that the organic sulfur compound is a saturated alkane, with sulfur content as high as 35.49%, and has good extreme pressure anti-wear property. An extreme pressure anti-wear additive, MPA, was developed with a modified vegetable oil as the base oil, the extreme pressure organic sulfur anti-wear additive and surfactants. The components of MPA are all environmentally friendly. Performance evaluation showed that MPA has good compatibility with other additives, and is completely dispersible in fresh water or drilling fluids. It helps optimize the properties of drilling fluids and has excellent lubricity.

     

    • FullText(HTML)
  • loading
    • References(18)
  • [1]
    李德江. 钻井液润滑剂的现状及发展方向[J]. 石油钻探技术,1998,6(2):35-38.

    LI Dejiang. Status and advances of drilling fluid lubricants[J]. Petroleum Drilling Techniques, 1998,6(2):35-38.
    [2]
    何鹏. 新型植物油钻井液润滑剂的研究[J]. 现代商贸工业,2015,17(10):196-198.

    HE Peng. Study on new vegetable lubricant used for drilling fluid[J]. Modern Business and Trade Industry, 2015,17(10):196-198.
    [3]
    LATHI P S, MATTIASSON B. Green approach for the preparation of biodegradable lubricant base stock from epoxidized vegatable oil[J]. Applied Catalysis B Environmental, 2007, 69(3):207-212.
    [4]
    杨汉民,何东平,张玉峰,等. 植物油制备绿色环保润滑剂的展望[J]. 中国油脂,2003,228(11):65-67.

    YANG Hanmin, HE Dongping, ZHANG Yufeng, et al. Prospect of environmental friendly lubricants made from vegetable oils[J]. Modern Business and Trade Industry, 2003,228(11):65-67.
    [5]
    WANG D P, Wu X D, Zhang X G. Developing status of green lubricating oils[J]. Tribology, 1999,19(2):181-186.
    [6]
    WⅡFRIED J B. Lubricants and the environment[J]. Tribology International,1998,30(1):35-37.
    [7]
    WAME T M, HALDER C A. Toxicity of lubricating oils[J]. Lubrication Engineering, 1986, 42(2):97-103.
    [8]
    孙晓英,朱峰,曲洋君. 改性植物油作为可降解润滑油的研究进展[J]. 润滑油,2015, 30(2):1-6.

    SUN Xiaoying,ZHU Feng,QU Yangjun. Research of using the modified vegetable oils as biodegradable lubricating base oil[J]. Lubricating Oil, 2015, 30(2):1-6.
    [9]
    罗春芝,刘霞.XCR水基极压润滑剂的研制及应用[J]. 钻井液与完井液,2006, 23(6):22-28.

    LUO Chunzhi,LIU Xia. Synthesis and application of a water base EP lubricant XCR[J]. Drilling Fluid & Completion Fluid, 2006, 23(6):22-28.
    [10]
    邱正松,王伟,黄维安,等. 钻井液用新型极压抗磨润滑剂SDR的研制及评价[J]. 钻井液与完井液, 2013,31(2):18-21.

    QIU Zhengsong,WANG Wei,HUANG Weian, et al. Research and evaluation of novel anti-wear extremepressure lubricant SDR used for drilling fluid[J]. Drilling Fluid & Completion Fluid, 2013,31(2):18-21.
    [11]
    杨宏伟,杨士亮,孙世安,等. 极压抗磨剂的发展现状及作用机理研究[J]. 当代化工,2012, 41(9):961-963.

    YANG Hongwei,YANG Shiliang,SUN Shian, et al. Research on developing status and mechanism of extremepressure and anti-wear additives[J]. Contemporary Chemical Industry, 2012, 41(9):961-963.
    [12]
    BEECK O, GIVENS J W, WILLIAMS E C. The mechanism of boundary lubrication Ⅱ:wear prevention by addition agents[J]. Proc Roy Soc London Ser A, 1940, 177:103-118.
    [13]
    岳聪伟,姜旭峰,徐文迪. 有机硫型极压抗磨剂的发展研究[J]. 广东化工,2015, 42(4):41-42.

    YUE Congwei,JIANG Xufeng, XU Wendi. Study on the extreme pressure and antiwear agent of type of organic sulfur[J]. Guangdong Chemical Industry, 2015, 42(4):41-42.
    [14]
    程思,衣守志,闫婷婷. 有机硫化酯润滑油添加剂的制备及性能研究[J]. 润滑与密封,2016, 41(4):111-114.

    CHENG Si,YI Shouzhi, YAN Tingting. Preparation and properties of organic sulfur lubricating additive[J]. Lubrication Engineering, 2016, 41(4):111-114.
    [15]
    SEVIM Z E, ATANU A, VENGSHE LIU. Chemically modified vegatable oil-based industrial fluid. US 6583302[P]. 2003.
    [16]
    FREEDMAN B, PRYDE E H, MOUNTS T L. Variables affecting the yields of fatty esters from transesterified vegetable oils[J]. Journal of the American Oil Chemists' Society, 1984, 61(10):1638-1643.
    [17]
    RONALD A H. Transesterification of epoxidized soybean oil to prepare epoxy methyl esters[J]. Industrial Crops and Products, 2008,27:130-132.
    [18]
    KIAN Y S, LYE O T, AHMAND S. Lubricant base from palm oil and its by-products. EP 1533360[P]. 2005.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (1167) PDF downloads(613) Cited by()
    Proportional views
    Related

    Copyright 《Drilling Fluid & Completion Fluid》津ICP备13002319号-1

    Address：Editorial Department of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei ProvinceChina Pos：062552

    Tel：（0317）2725487　2722354Email：zjyywjy@126.com

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return