Volume 34 Issue 1
Jan.  2017
Turn off MathJax
Article Contents
HU Zubiao, WANG Qingchen, CHEN Tingting. Treatment and use of Waste Drilling Fluid with Existing Solids Control Equipment[J]. DRILLING FLUID & COMPLETION FLUID, 2017, 34(1): 92-95. doi: 10.3969/j.issn.1001-5620.2017.01.017
Citation: HU Zubiao, WANG Qingchen, CHEN Tingting. Treatment and use of Waste Drilling Fluid with Existing Solids Control Equipment[J]. DRILLING FLUID & COMPLETION FLUID, 2017, 34(1): 92-95. doi: 10.3969/j.issn.1001-5620.2017.01.017

Treatment and use of Waste Drilling Fluid with Existing Solids Control Equipment

doi: 10.3969/j.issn.1001-5620.2017.01.017
  • Received Date: 2016-11-05
  • Publish Date: 2017-01-31
  • Waste drilling fluids in Changqing gas field are treated with gel-breaking and solid-liquid separation technologies to conform to the environment protection requirements. In gel-breaking the drilling fluids, a new gel-breaking agent, CQPJ-1, was developed to replace the single-purpose, slow and low-efficiency conventional gel-breaking agents. CQPJ-1 is able to reduce the quantity of electric charge of clay colloids and suspended particles, thereby decreasing the coagulation stability of the suspension system. By oxygenolysis, CQPJ-1 decomposes polymer materials, producing primary radicals and initiating a chain oxidation reaction, thereby dramatically reducing the molecular weight of polymer. CQXN-1, a cationic polymeric flocculant with moderate molecular weight, was selected to flocculate destabilized clay particles through its cationic group and long molecular chain, making the flocs much easier to mechanically dewater than flocs flocculated with inorganic flocculants. Laboratory evaluation has been conducted on the performance of gel-breaking agents, including H2O2, potassium permanganate, sodium phosphite and CQPJ-1, and the performance of flocculants such as poly aluminum chloride, poly ferric chloride, aluminum sulfate and CQXN-1. It was found that, using existing solids-control equipment, a waste drilling fluid with pH adjusted between 6.0-6.5, after treatment with 2%CQPJ-1 for 3 hours and then adding 0.15%CQXN-1, can be solid-liquid separated at 2,200 r/min. The separation efficiency and results have achieved the expected goal. Contamination index of the liquid phase from the treated waste drilling fluid was greatly reduced, and drilling fluids prepared with the liquid obtained had properties conforming to the requirements of drilling operation.

     

  • loading
  • [1]
    赖晓晴,楼一珊,孙金声,等. 废弃聚磺钻井液固液分离技术[J]. 钻井液与完井液,2010,27(1):71-74.

    LAI Xiaoqing, LOU Yishan,SUN Jinsheng,et al. Polysulfonate drilling fluid solid liquid separation technology of waste[J].Drilling Fluid & Completion Fluid,2010,27(1):71-74.
    [2]
    赵雄虎,王风春. 废弃钻井液处理研究进展[J]. 钻井液与完井液,2004,21(2):43-47.

    ZHAO Xionghu,WANG Fengchun.Research progress of waste drilling fluid treatment[J]. Drilling Fluid & CompletionFluid,2004,21(2):43-47.
    [3]
    罗跃,郑力军,王志龙,等.吐哈油田废钻井液脱稳固化技术研究[J]. 钻井液与完井液,2007,24(9):71-72.

    LUO Yue,ZHENG Lijun,WANG Zhilong,et al. Solidification treatment of waste drilling fluids in Tuha oilfield[J].Drilling Fluid & Completion Fluid,2007,24(5):71-72.
    [4]
    李广环,吴文茹,黄达全,等. 废弃水基钻井液用新型破胶絮凝剂的研制与应用[J]. 钻井液与完井液, 2015,32(5):46-48.

    LI Guanghuan,WU Wenru,HUANG Daquan,et al. Development of new gel-breaking flocculant for waste water base drilling fluid treatment[J].Drilling Fluid & Completion Fluid,2015,32(5):46-48.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (571) PDF downloads(273) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return