Volume 32 Issue 5
Sep.  2015
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2015  >  32(5): 10-14
LIU Junyi, QIU Zhengsong, LUO Yang, WANG Weizhong, WANG Qiang, HUANG Daquan, ZHANG Xianbin. Study on Lost Circulation Prevention While Drilling Using Oil Base Drilling Fluid[J]. DRILLING FLUID & COMPLETION FLUID, 2015, 32(5): 10-14. doi: 10.3969/j.issn.1001-5620.2015.05.003
Citation: LIU Junyi, QIU Zhengsong, LUO Yang, WANG Weizhong, WANG Qiang, HUANG Daquan, ZHANG Xianbin. Study on Lost Circulation Prevention While Drilling Using Oil Base Drilling Fluid[J]. DRILLING FLUID & COMPLETION FLUID, 2015, 32(5): 10-14. doi: 10.3969/j.issn.1001-5620.2015.05.003
shu

Study on Lost Circulation Prevention While Drilling Using Oil Base Drilling Fluid

doi: 10.3969/j.issn.1001-5620.2015.05.003

  • No. 66, Changjiang West Road, Economic and Technological Development Zone of Qingdao, Shandong 266555, China

More Information
  • Corresponding author: 邱正松,E-mail:qiuzs63@sina.com。
  • Received Date: 2015-07-31
  • Publish Date: 2015-09-30
    Abstract
  • Different lost circulation materials have been selected and tried to prevent loss of oil base mud which always resulted in much higher drilling cost compared with water base drilling fluid. A new lost circulation material (LCM) was developed for use in oil base drilling fluids. This LCM is a lost circulation prevention while drilling agent, and is compatible with many other LCMs. In laboratory studies, rigid bridging particles, elastic packing particles and fine particles of fibers work synergistically, and can swiftly form dense plugging and sealing layers to prevent lost circulation of oil base drilling fluids. An oil base drilling fluid formulated with this LCM is tested for its properties before and after hot rolling (at 120℃ for 16 h). This fluid has filtration rate through PPA sand bed of only 11.4 mL, and it also has satisfactory rheological properties.

     

    • FullText(HTML)
  • loading
    • References(17)
  • Wang H, Sweatman R, Engelman B, et al. Best practice in understanding and managing lost circulation challenges[C]. SPE 95895, 2008.
    侯士立,黄达全,杨贺卫,等.刚性楔入承压封堵技术[J].钻井液与完井液, 2015, 32(1):49-52. Hou Shili, Huang Daquan, Yang Hewei, et al.Study and application of rigid wedging mud loss control under pressure[J]. Drilling Fluid & Completion Fluid, 2015, 32(1):49-52.
    Onyia E C. Experimental data analysis of lost-circulation problems during drilling with oil-based mud[C]. SPE 22581, 1994.
    Dupriest F E. Fracture closure stress(FCS)and lost returns practices[C]. SPE 92192, 2005.
    Benaissa S, Bachelot A, Ricaud J, et al. Preventing differential sticking and mud losses drilling through highly depleted sands fluids and geomechanics approach[C]. SPE 92266, 2005.
    Aderibigbe A A, Lane R H. Rock/fluid chemistry impacts on shale fracture behavior[C]. SPE 164102, 2013.
    徐江,石秉忠,王海波,等.桥塞封堵裂缝性漏失机理研究[J].钻井液与完井液, 2014, 31(1):44-46. Xu Jing, Shi Bingzhong, Wang Haibo, et al. Mechanism study on bridge plugging technology for fractured formation[J]. Drilling Fluid & Completion Fluid, 2014, 31(1):44-46.
    王建华,李建男,闫丽丽,等.油基钻井液用纳米聚合物封堵剂的研制[J].钻井液与完井液, 2013, 30(6):5-8. Wang Jianhua, Li Jiannan, Yan Lili, et al. The development and performance evaluation of plungging agent for oil-base drilling fluids[J].Drilling Fluid & Completion Fluid, 2013, 30(6):5-8.
    Nayberg T M, Petty B R. Laboratory study of lost circulation materials for use in oil-based drilling muds[C]. SPE 14995, 1986.
    Scorsone J T, Sanders M W, Patel A D. An improved oilbased chemical gel system for wellbore stabilization[C]. SPE 121676, 2009.
    孙其诚,王光谦.颗粒物质力学导论[M].北京:科学出版社, 2009:94-99. Sun Qicheng, Wang Guangqian.Inroductory theory of grannule matter mechanics[M]. Beijing:China Science Press, 2009:94-99.
    李家学,黄进军,罗平亚,等.随钻防漏堵漏技术研究[J].钻井液与完井液, 2008, 25(3):25-28. Li Jiaxue, Huang Jinjun, Luo Pingya, et al.Researches on mud losses prevention and control[J].Drilling Fluid & Completion Fluid, 2008, 25(3):25-28.
    刘明华,孙举,王中华,等.非常规油气藏水平井油基钻井液技术[J].钻井液与完井液, 2013, 30(2):1-5. Liu Minghua, Sun Ju, Wang Zhonghua, et al. Oilbased drilling fluid technology in horizontal wells with unconventional oil-gas research[J].Drilling Fluid & Completion Fluid, 2013, 30(2):1-5.
    王绪美,解洪祥,赵福祥,等.钻井液用新型无荧光纳米处理剂PNP的研究[J].钻井液与完井液,2014,31(6):13-16. Wang Xumei, Xie Hongxiang, Zhao Fuxiang, et al. Laboratory study of a new non-fluorescent nano drilling fluid additive PNP[J]. Drilling Fluid & Completion Fluid, 2014, 31(6):13-16.
    Savari S, Whitfill D L, Jamison D E, et al. A method to evaluate lost circulation materials-investigation of effective wellbore strengthening applications[C]. SPE 167977, 2014.
    Wang H, Soliman M Y, Tower B F, et al. Avoiding drilling problems by strengthening the wellbore while drilling[C]. ARMA 08-201, 2008.
    Mostafavi V, Hareland G, Belayneh M, et al. Experimental and mechanistic modeling of fracture sealing resistance with respect to fluid and fracture properties[C]. ARMA 11-198, 2011.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (732) PDF downloads(251) Cited by()
    Proportional views
    Related

    Copyright 《Drilling Fluid & Completion Fluid》津ICP备13002319号-1

    Address：Editorial Department of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei ProvinceChina Pos：062552

    Tel：（0317）2725487　2722354Email：zjyywjy@126.com

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return