Volume 32 Issue 4
May  2015
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2015  >  32(4): 55-58
XU Weixiang, WANG Chengwen, LIU Wei, LI Fei, MENG Fanchang. A New High Temperature Low Density Cement Slurry with Fly Ash[J]. DRILLING FLUID & COMPLETION FLUID, 2015, 32(4): 55-58. doi: 10.3969/j.issn.1001-5620.2015.04.015
Citation: XU Weixiang, WANG Chengwen, LIU Wei, LI Fei, MENG Fanchang. A New High Temperature Low Density Cement Slurry with Fly Ash[J]. DRILLING FLUID & COMPLETION FLUID, 2015, 32(4): 55-58. doi: 10.3969/j.issn.1001-5620.2015.04.015
shu

A New High Temperature Low Density Cement Slurry with Fly Ash

doi: 10.3969/j.issn.1001-5620.2015.04.015

  • College of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China

More Information
  • Corresponding author: 王成文,电话15264259168
  • Received Date: 2015-01-29
  • Publish Date: 2015-07-31
    Abstract
  • The effect of the concentration of fly ash and micro silicon powder on the compressive strength of set cement at middle and high temperatures was studied. At elevated temperatures (≥125 ℃), micro silicon powder (used as stabilizer in cement slurry) hindered the normal increasing of the compressive strength of the fly ash cement slurry. A new high temperature enhancer was developed for use in low density fly ash cement slurry to maintain its high temperature stability and to solve the abnormal development of the strength of the said cement slurry. Using this enhancer, cement slurries having density of 1.50-1.60 g/cm3 were developed. These slurries had good sedimentation stability, low filter loss, changeable thickening time, high compressive strength of set cement, and good compressive strength development at the top of cement slurry column. The static gel strength of the cement slurry had transition time of 18 min at 130 ℃, satisfying the needs for well cementing at higher differential temperatures, such as 85-130 ℃.

     

    • FullText(HTML)
  • loading
    • References(13)
  • 于永金,靳建洲,齐奉忠,等. 高温深井固井水泥浆稳 定性探讨[J]. 西部矿探工程,2012(5):18-21. Yu Yongjin,Jin Jianzhou,Qi Fengzhong,et al. Discussion on the stability of cement slurry of hightemperature and deep wells[J]. West-china Exploration Engineering,2012(5):18-21.
    王成文,陈大钧,严炎诚,等. 复杂井况固井低密度水 泥浆体系[J]. 钻井液与完井液,2004,21(5):34-35. Wang Chengwen,Chen Dajun,Yan Yancheng,et al. Light-weight cement slurry in complex hole condition[J]. Drilling Fluid & Completion Fluid,2004,21(5):34-35.
    岳家平,徐翔,李早元,等. 高温大温差固井水泥浆体 系研究[J]. 钻井液与完井液,2012,29(2):59-62. Yue Jiaping,Xu Xiang,Li Zaoyuan,et al. Research on high temperature and large temperature difference cement slurry system[J]. Drilling Fluid & Completion Fluid,2012, 29(2):59-62.
    Tomilina M Elena,Chougnet-Sirapian Alice,Wesam Aboutourkia. New thermally responsive cement for heavy oil wells[R]. SPE 157892,2012.
    Salehpour G A,Pershikova Elena,Chougnet-Sirapian Alice,et al. Novel steam-resilient cement system for longterm steam injection well integrity:case study of a steamflooded field in Indonesia[R]. SPE 170048,2014.
    张华,冯宇思,靳建洲,等. 大温差水泥浆体系的研究 与应用[J]. 钻井液与完井液,2012,29(5):54-57. Zhang Hua,Feng Yusi,Jin Jianzhou,et al. Study and application of large temperature difference cement slurry system[J].Drilling Fluid & Completion Fluid,2012,29(5): 54-57.
    严海兵, 李美平, 张成金, 等. 四川超深井长封固水泥浆性 能研究与应用[J]. 钻井液与完井液, 2011, 28(6):55-57. Yan Haibing,Li Meiping,Zhang Chengjin,et al. Research and application of cement slurry for long cementing section in ultra-deep well in Sichuan[J]. Drilling Fluid & Completion Fluid,2011,28(6):55-57.
    赵岳, 沙林浩, 王建东, 等. 油井水泥高温缓凝剂特性及 发展浅析[J]. 钻井液与完井液, 2011, 28(增刊):54-57. Zhao Yue,Sha Linhao,Wang Jiandong,et al. Summary on characteristics and development of high temperature oil well retarder[J]. Drilling Fluid & Completion Fluid,2011, 28(S0):54-57.
    郭胜来,步玉环,郭艳霞. 耐高温油井水泥降失水剂的 合成和评价[J]. 油田化学,2012,29(2):151-154. Guo Shenglai,Bu Yuhuan,Guo Yanxia. Synthesis and evaluation of high temperature fluid loss control additive used in oil well cement[J]. Oilfield Chemistry,2012,29(2): 151-154.
    Eoffls,Busterd.Hightemperaturesynthetic cement retarder[R].SPE 28957,1995.
    Haidher Syed,Kale Samir Vasant,Affes, Sami,et al. HP/HT cement system design—East coast case history[R]. SPE 104048,2006.
    Brandl Andreas,Acorda Edgar Paul Ramiro,Doherty Dale Robert,et al.Lightweight cementing design improves zonal isolation on challenging high temperature offshore Thailandwells[R].SPE 147012,2011.
    Thomas H.The effect of key cement additives on themechanical properties of normal density oil and gas well cementsystems[R].SPE 77867,2002.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (564) PDF downloads(269) Cited by()
    Proportional views
    Related

    Copyright 《Drilling Fluid & Completion Fluid》津ICP备13002319号-1

    Address：Editorial Department of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei ProvinceChina Pos：062552

    Tel：（0317）2725487　2722354Email：zjyywjy@126.com

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return