Volume 32 Issue 1
Jan.  2015
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2015  >  32(1): 49-52
HOU Shili, HUANG Daquan, YANG Hewei, LIU Guangyan, LI Shuan, WANG Lukun, SUN Shuang, WANG Xiaofang. Study and Application of Rigid Wedging Mud Loss Control Under Pressure[J]. DRILLING FLUID & COMPLETION FLUID, 2015, 32(1): 49-52. doi: 10.3969/j.issn.1001-5620.2015.01.013
Citation: HOU Shili, HUANG Daquan, YANG Hewei, LIU Guangyan, LI Shuan, WANG Lukun, SUN Shuang, WANG Xiaofang. Study and Application of Rigid Wedging Mud Loss Control Under Pressure[J]. DRILLING FLUID & COMPLETION FLUID, 2015, 32(1): 49-52. doi: 10.3969/j.issn.1001-5620.2015.01.013
shu

Study and Application of Rigid Wedging Mud Loss Control Under Pressure

doi: 10.3969/j.issn.1001-5620.2015.01.013

  • Drilling Fluid Technology Services of CNPC Bohai Drilling Engineering Company Limited, Tianjin 300280

  • Received Date: 2014-09-10
  • Publish Date: 2015-01-30
    Abstract
  • The rigid wedging mud loss control under pressure is a technology in which rigid lost circulation material (LCM), expandable or expandable LCM, and low permeability LCM are employed to bridge the mud loss channels. It involves bridging, wedging and filling in the fractures and pores of formation to increase the circumferential stress of formation, hence enhancing the pressure bearing of the formation. LCM slurries for mud loss control under pressure were formulated with optimized particle size distribution determined by SAN-2 engineering theory. The rigid LCM was also compounded with other LCM to verify their performance in mud loss control. The experiments showed that LCM slurries containing compounded rigid LCM, expandable LCM and low permeability LCM promptly bridged and filled the fractures and formed low permeability packing with pressure bearing of 7 MPa. In field application of this technology in 33 wells, success rate of mud loss control was increased remarkably, and the quantity of LCM slurries was reduced.

     

    • FullText(HTML)
  • loading
    • References(10)
  • 黄进军,罗平亚,李家学,等. 提高地层承压能力技术[J]. 钻井液与完井液,2009,26(2):69-71. Huang Jinjun, Luo Pingya, Li Jiaxue, et al. A study on enhancement of formation bearing resistance[J]. Drilling Fluid & Completion Fluid, 2009, 26(2):69-71.
    郝惠军,田野,贾东民,等. 承压封堵技术的研究与应用[J]. 钻井液与完井液,2011,28(6):14-16. Hao Huijun, Tian Ye, Jia Dongmin, et al. Research and application on technology of mud loss control under pressure[J]. Drilling Fluid & Completion Fluid, 2011, 28(6):14-16.
    Aston M S, Alberty M W, Mclean M R, et al. Drilling fluids for wellbore strengthening[R]. SPE 87130, 2004.
    Song J H, Rojas J C. Preventing mud losses by wellbore strengthening[R]. SPE 101593, 2006.
    Alberty M W, Mclean M R. A physical model for stress cages[R]. SPE 90493, 2004.
    王贵,蒲晓林. 提高地层承压能力的钻井液封堵作用机理[J]. 石油学报,2010,31(6):1009-1012. Wang Gui, Pu Xiaolin. Plugging mechanism of drilling fluid by enhancing wellbore pressure[J]. Acta Petrolei Sinica, 2010, 31(6):1009-1012.
    王贵,蒲晓林,文志明,等. 基于断裂力学的诱导裂缝性井漏控制机理分析[J]. 西南石油大学学报:自然科学版,2011,33(1):131-134. Wang Gui, Pu Xiaolin, Wen Zhiming, et al. Mechanism of controlling lost circulation in induced fracture formation based on fracture mechanics[J]. Journal of Southwest Petroleum University:Science & Technology Edition, 2011, 33(1):131-134.
    王禹,黄达全,解文,等. 板南储气库井承压封堵技术[J]. 钻井液与完井液,2013,30(3):47-49. Wang Yu, Huang Daquan, Xie Wen, et al. Technology of mud loss control under pressure in Bannan gas storage wells[J]. Drilling Fluid & Completion Fluid, 2013, 30(3):47-49.
    李家学,黄进军,罗平亚,等. 随钻防漏封堵技术研究[J], 钻井液与完井液,2008,25(3):25-28. Li Jiaxue, Huang Jinjun, Luo Pingya, et al. Research on mud losses prevent and control[J]. Drilling Fluid & Completion Fluid, 2008, 25(3):25-28.
    Gelan E L, David A G, Elton K W. Design and evaluation of lost-circulation materials for severe environments[J]. J Pet Technol, 1990, 42(3):328-337.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (632) PDF downloads(228) Cited by()
    Proportional views
    Related

    Copyright 《Drilling Fluid & Completion Fluid》津ICP备13002319号-1

    Address：Editorial Department of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei ProvinceChina Pos：062552

    Tel：（0317）2725487　2722354Email：zjyywjy@126.com

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return