Progresses in the Studies of Mud Loss Control with Polymer Gels

HAO Huijun; LIU PO; YAN Juntao; MA Chengyu; HE Bin; XUN Wenyun

doi:10.12358/j.issn.1001-5620.2022.06.001

Volume 39 Issue 6

Nov. 2022

Turn off MathJax

Article Contents

Article Navigation > DRILLING FLUID & COMPLETION FLUID > 2022 > 39(6): 661-667, 676

HAO Huijun, LIU PO, YAN Juntao, et al.Progresses in the studies of mud loss control with polymer gels[J]. Drilling Fluid & Completion Fluid，2022, 39（6）：661-667, 676 doi: 10.12358/j.issn.1001-5620.2022.06.001

Citation:

HAO Huijun, LIU PO, YAN Juntao, et al.Progresses in the studies of mud loss control with polymer gels[J]. Drilling Fluid & Completion Fluid，2022, 39（6）：661-667, 676 doi: 10.12358/j.issn.1001-5620.2022.06.001

Citation:

PDF( 2865 KB)

Progresses in the Studies of Mud Loss Control with Polymer Gels

doi: 10.12358/j.issn.1001-5620.2022.06.001

1.
CNPC Engineering Technology R & D Company Limited﹒National Engineering Research Center for Oil and Gas Drilling and Completion Technology, Beijing 102206
2.
Chongqing Shale Gas E & D Company Limited of PetroChina Southwest Oil & Gasfield Company, Chongqing 401120
3.
PetroChina Chuanyu Shale Gas Front-line Command Post, Chengdu, Sichuan 610000
4.
Drilling Engineering Company of BHDC, Hejian, Hebei 062450

Received Date: 2022-06-26
Rev Recd Date: 2022-07-20

Available Online: 2023-04-11

Publish Date: 2022-11-30

Abstract

Abstract

Polymer gel lost circulation materials (LCMs) have the advantages of high viscoelasticity and deformability in mud loss control. Generally, there are two kinds of polymer gel LCMs, one is the conventional polymer gel LCMs and the other, the so-called “intelligent” polymer gel LCMs. When use the conventional polymer gel LCMs to control mud losses, the gelling time of the polymer gel is not controllable, and therefore the losses of muds or other work fluids cannot be stopped efficiently and accurately. On the other hand, the “intelligent” polymer gel can be used to efficiently and accurately stop the mud losses based on many different mechanisms, and are therefore under investigation as a hotspot LCM. It can be expected that the stimuli-responsive polymer gel will become one of the important fields in which LCMs are studied.
- Polymer gel,
- Lost circulation control,
- Intelligent

FullText(HTML)

References(31)

References

[1]	张希文,李爽,张洁,等. 钻井液堵漏材料及防漏堵漏技术研究进展[J]. 钻井液与完井液,2009,26(6):74-76. ZHANG Xiwen, LI Shuang, ZHANG Jie, et al. Research progress on lost circulation materials and lost circulation control technology[J]. Drilling Fluid & Completion Fluid, 2009, 26(6):74-76.
[2]	杨勇,罗鸣,韩成,等. 国内外大裂缝、溶洞性复杂地层堵漏技术进展[J]. 化学工程与装备,2018(8):282-284. YANG Yong, LUO Ming, HAN Cheng, et, al. Advances in plugging technology for large fractures and complex cave formations at home and abroad[J]. Chemical Engineering and Equipment, 2018(8):282-284.
[3]	胡祖彪,李德波,陈秉炜,等. 智能凝胶GD-1在陕北黄土层防漏堵漏中的应用[J]. 钻井液与完井液,2010,27(1):85-86. HU Zubiao, LI Debo, CHEN Bingwei, et al. The application of an intelligent gel GD-1 in the lost circulation control in the yellow clay-stone formations in Shanbei[J]. Drilling Fluid & Completion Fluid, 2010, 27(1):85-86.
[4]	鲁亿,黄进军,张斌,等. 井下聚合堵漏技术研究[J]. 钻井液与完井液,2010,27(3):36-37. LU Yi, HUANG Jinjun, ZHANG Bin, et al. Study on plugging technology by underground polymerization[J]. Drilling Fluid & Completion Fluid, 2010, 27(3):36-37.
[5]	ALI A, KALLOO C L, SINGH U B. Preventing lost circulation in severely depleted unconsolidated sandstone reservoirs[J]. SPE Drilling & Completion, 1994, 9(1):32-38.
[6]	汪建军,李艳,刘强,等. 新型多功能复合凝胶堵漏性能评价[J]. 天然气工业,2005,25(9):101-103. WANG Jianjun, LI Yan, LIU Qiang, et al. Evaluation on sealing ability of new multi function composite gel[J]. Natural Gas Industry, 2005, 25(9):101-103.
[7]	何绍群,柏永青,于田田,等. 纳米硅藻土增强聚丙烯酰胺凝胶堵剂强度及耐温性[J]. 科学技术与工程,2018,18(29):65-71. HE Shaoqun, BO Yongqing, YU Tiantian, et al. Strength and temperature tolerance improvement by diatomite doped polyacylamide gel for water shut-off[J]. Science Technology and Engineering, 2018, 18(29):65-71.
[8]	SUN F, LIN M, DONG Z, et al. Nanosilica-induced high mechanical strength of nanocomposite hydrogel for killing fluids[J]. Journal of Colloid and Interface Science, 2015(458):45-52.
[9]	ZHOU Y, CHU R, FAN L, et al. Study on the mechanism and performance of polymer gels by TE and PVA chemical cross-linking[J]. Journal of Applied Polymer Science, 2022, 139(17):52043.
[10]	王松. 无固相凝胶堵剂NSG-2的合成与性能评价[J]. 特种油气藏,2004,11(3):76-78. WANG Song. Preparation and performance of NSG-2 solid-free plugging agent[J]. Special Oil and Gas Reservoirs, 2004, 11(3):76-78.
[11]	曹晓春,李倍任,秦义,等. 聚合物凝胶堵漏剂的研究及应用[J]. 当代化工,2015,44(11):2572-2574,2577. CAO Xiaochun, LI Beiren, QIN Yi, et al. Research and application of polymer gel plugging agent[J]. Contemporary Chemical Industry, 2015, 44(11):2572-2574,2577.
[12]	王松,潘建琼. WS—1凝胶堵漏剂的研制与应用[J]. 石油地质与工程,1998,12(5):23-25. WANG Song, PAN Jianqiong. Development and Application of WS-1 gel plugging materials[J]. Petroleum Geology & Engineering, 1998, 12(5):23-25.
[13]	赵志强,苗海龙,李自立,等. 一种高摩阻凝胶暂堵剂的开发[J]. 钻井液与完井液,2014,31(1):50-53. ZHAO Zhiqiang, MIAO Hailong, LI Zili, et al. Development and research of high friction gelation temporary agent[J]. Drilling Fluid & Completion Fluid, 2014, 31(1):50-53.
[14]	SIMJOO M, SEFTI M V, KOOHI A D, et al. Polyacrylamide gel polymer as water shut-off system: preparation and investigation of physical and chemical properties in one of the iranian oil reservoirs conditions[J]. Iranian Journal of Chemistry & Chemical Engineering-International English Edition, 2007, 26(4):99-108.
[15]	李志勇,杨超,李岩,等. 抗高温高强度恶性漏失堵漏凝胶室内研究[J]. 新疆石油科技,2015,25(4):40-45. LI Zhiyong, YANG Chao, LI Yan, et. al Laboratory study of high temperature resistant and high strength plugging materials for malignant leakage[J]. Xinjiang Petroleum and Technology, 2015, 25(4):40-45.
[16]	罗兴树,蒲晓林,黄岩,等. 堵漏型聚合物凝胶材料研究与评价[J]. 钻井液与完井液,2006,23(2):28-32. LUO Xingshu, PU Xiaolin, HUANG Yan, et al. Study and evaluation on gelling polymer with plugging effect[J]. Drilling Fluid & Completion Fluid, 2006, 23(2):28-32.
[17]	白雪,张定军,陈玉娴,等. 聚丙烯酰胺基暂堵剂的表面改性及应用研究[J]. 应用化工,2018,47(6):1140-1144. BAI Xue, ZHANG Dingjun, CHEN Yuxian, et al. Surface modification and application of plugging agent based on polyacrylamide[J]. Applied Chemical Industry, 2018, 47(6):1140-1144.
[18]	廖月敏,付美龙,杨松林. 耐温抗盐凝胶堵水调剖体系的研究与应用[J]. 特种油气藏,2019,26(1):158-162. LIAO Yuemin, FU Meilong, YANG Songlin. Study and application of water plugging and profile control system of heat and salt resistant gel[J]. Special Oil & Gas Reservoirs, 2019, 26(1):158-162.
[19]	吴清辉. 高温高盐凝胶堵剂WTT-202研制与应用[J]. 精细与专用化学品,2019,27(2):28-33. WU Qinghui. Study and application of high temperature & salinity gel agent WTT-202[J]. Fine and Specialty Chemicals, 2019, 27(2):28-33.
[20]	BAI Y, LIAN Y, BAN C, et al. Facile synthesis of temperature-resistant hydroxylated carbon black/Polyacrylamide nanocomposite gel based on chemical crosslinking and its application in oilfield[J]. Journal of Molecular Liquids, 2021, 329(4):115578.
[21]	潘一,徐明磊,郭奇,等. 钻井液智能堵漏材料研究进展[J]. 材料导报,2021,35(9):9223-9230. PAN Yi, XU Minglei, GUO Qi, et al. Research progress of smart plugging materials for drilling fluid[J]. Materials Reports, 2021, 35(9):9223-9230.
[22]	陈军,陈小龙. 低成本延迟交联凝胶堵漏体系研究[J]. 山东化工,2020,49(6):141-144,147. CHEN Jun, CHEN Xiaolong. Study on a low-cost delayed crosslinking gel loss circulation system[J]. Shandong Chemical Industry, 2020, 49(6):141-144,147.
[23]	李玉飞. 有机铬的合成及延缓交联性能研究[D]. 东北石油大学, 2015. LI Yufei. Synthesis of organic chromium and study on the performance of delaying crosslink[D]. Northeast Petroleum University, 2015
[24]	彭振斌,张闯,李凤,等. 聚乙烯醇凝胶堵漏剂的室内研究[J]. 天然气工业,2017,37(6):72-78. PENG Zhenbin, ZHANG Chuang, LI Feng, et al. A laboratory study on a PVA gel plugging agent[J]. Natural Gas Industry, 2017, 37(6):72-78.
[25]	OFFILER C A, JONES C D, STEED J W. Metal ‘turn-off’, anion ‘turn-on’ gelation cascade in pyridinylmethyl ureas[J]. Chemcal Communication, 2017, 53:2024-2027.
[26]	LI Z Y, LI X G, DU K, et al. Development of a new high-temperature and high-strength polymer gel for plugging fractured reservoirs[J]. Upstream Oil and Gas Technology, 2020.
[27]	郭永宾,颜帮川,黄熠,等. 高温成胶可降解聚合物凝胶堵漏剂的研制与评价[J]. 钻井液与完井液,2019,36(3):293-297. GUO Yongbin, YAN Bangchuan, HUANG Yi, et al. Development and evaluation of a high temperature gelling and degradable polymer lost circulation material[J]. Drilling Fluid & Completion Fluid, 2019, 36(3):293-297.
[28]	颜帮川,蒋官澄,胡文军,等. 高温延迟交联聚丙烯酰胺凝胶堵漏剂的研究[J]. 钻井液与完井液,2019,36(6):679-682. YAN Bangchuan, JIANG Guancheng, HU Wenjun, et al. Study on high temperature delayed crosslinking[J]. Drilling Fluid & Completion Fluid, 2019, 36(6):679-682.
[29]	FUENTES-CAPARRÓS A M, DE PAULA GÓMEZ-FRANCO F, DIETRICH B, et al. Annealing multicomponent supramolecular Gels[J]. Nanoscale, 2019, 11:3275-3280.
[30]	JIANG Guancheng, DENG Zhengqiang, HE Yinbo, et al. Cross-linked polyacrylamide gel as loss circulation materials for combating lost circulation in high temperature well drilling operation[J]. Journal of Petroleum Science and Engineering, 2019, 181:106250. doi: 10.1016/j.petrol.2019.106250
[31]	张新民,聂勋勇,王平全,等. 特种凝胶在钻井堵漏中的应用[J]. 钻井液与完井液,2007,24(5):83-84. ZHANG Xinmin, NIE Qiangyong, WANG Pingquan, et al. A special gel for mud loss control[J]. Drilling Fluid & Completion Fluid, 2007, 24(5):83-84.

Relative Articles

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(7) / Tables(2)

Get Citation

PDF

XML

Article Metrics

Article views (848) PDF downloads(110)

Progresses in the Studies of Mud Loss Control with Polymer Gels

doi: 10.12358/j.issn.1001-5620.2022.06.001

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Progresses in the Studies of Mud Loss Control with Polymer Gels

doi: 10.12358/j.issn.1001-5620.2022.06.001

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Export File

Citation

Format

Content