Citation: | ZHANG Guoguang, WANG Chunyu, DAI Dan, et al.The effects of particle size of silica flour on the performance of oil well cement at high temperature and high pressuree[J]. Drilling Fluid & Completion Fluid,2022, 39(4):466-471 doi: 10.12358/j.issn.1001-5620.2022.04.011 |
[1] |
苏义脑,路保平,刘岩生,等. 中国陆上深井超深井钻完井技术现状及攻关建议[J]. 石油钻采工艺,2020,42(5):527-542. doi: 10.13639/j.odpt.2020.05.001
SU Yinao, LU Baoping, LIU Yansheng, et al. Status and research suggestions on the drilling and completion technologies for onshore deep and ultra deep wells in China[J]. Oil Drilling & Production Technology, 2020, 42(5):527-542. doi: 10.13639/j.odpt.2020.05.001
|
[2] |
徐新丽. 累积工况下常规加砂水泥石的耐温性[J]. 钻井液与完井液,2021,38(6):754-759.
XU Xinli. High temperature resistance of conventional set sand cement under cumulative working conditions[J]. Drilling Fluid & Completion Fluid, 2021, 38(6):754-759.
|
[3] |
YANG T, WU Q, ZHU H, et al. Geopolymer with improved thermal stability by incorporating high-magnesium nickel slag[J]. Construction and Building Materials, 2017, 155:475-484. doi: 10.1016/j.conbuildmat.2017.08.081
|
[4] |
KRAKOWIAK K J, THOMAS J J, MUSSO S, et al. Nano-chemo-mechanical signature of conventional oil-well cement systems: Effects of elevated temperature and curing time[J]. Cement and Concrete Research, 2015, 67:103-121. doi: 10.1016/j.cemconres.2014.08.008
|
[5] |
NELSON E B, GUILLOT D. Well cementing [M]. Second ed. , Schlumberger, 2006.
|
[6] |
DE SENA COSTA B L, DE SOUZA G G, DE OLIVEIRA FREITAS J C, et al. Silica content influence on cement compressive strength in wells subjected to steam injection[J]. Journal of Petroleum Science and Engineering, 2017, 158:626-633. doi: 10.1016/j.petrol.2017.09.006
|
[7] |
GE Z, YAO X, WANG X, et al. Thermal performance and microstructure of oil well cement paste containing subsphaeroidal konilite flour in HTHP conditions[J]. Construction and Building Materials, 2018, 172:787-794. doi: 10.1016/j.conbuildmat.2018.03.268
|
[8] |
PERNITES R B, SANTRA A K. Portland cement solutions for ultra-high temperature wellbore applications[J]. Cement and Concrete Composites, 2016, 72:89-103. doi: 10.1016/j.cemconcomp.2016.05.018
|
[9] |
OMOSEBI O, MAHESHWARI H, AHMED R, et al. Investigating temperature effect on degradation of well cement in HPHT carbonic acid environment[J]. Journal of Natural Gas Science and Engineering, 2015, 26:1344-1362. doi: 10.1016/j.jngse.2015.08.018
|
[10] |
Recommended practice for testing well cements [S]. API RP 10B-2, 2013.
|
[11] |
YANAGISAWA K, HU X, ONDA A, et al. Hydration of β-dicalcium silicate at high temperatures under hydrothermal conditions[J]. Cement and Concrete Research, 2006, 36(5):810-816. doi: 10.1016/j.cemconres.2005.12.009
|
[12] |
PANG X, QIN J, SUN L, et al. Long-term strength retrogression of silica-enriched oil well cement: A comprehensive multi-approach analysis[J]. Cement and Concrete Research, 2021, 144:106424. doi: 10.1016/j.cemconres.2021.106424
|
[13] |
HUA S, WANG K, YAO X. Developing high performance phosphogypsum-based cementitious materials for oil-well cementing through a step-by-step optimization method[J]. Cement and Concrete Composites, 2016, 72:299-308. doi: 10.1016/j.cemconcomp.2016.05.017
|
[14] |
耿晨梓,姚晓,代丹,等. SiO2晶态物性对高温水泥石力学性能的影响[J]. 钻井液与完井液,2020,37(6):777-783.
GENG Chenzi, YAO Xiao, DAI Dan, et al. Effects of physical properties of SiO2 crystalline state on mechanical properties of high temperature set cement[J]. Drilling Fluid & Completion Fluid, 2020, 37(6):777-783.
|