Volume 38 Issue 6
Nov.  2021
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2021  >  38(6): 728-731
BA Wenxuan, WANG Zhengliang, WANG Changjun.Study on high temperature resistant compound gel plugging agent[J]. Drilling Fluid & Completion Fluid，2021, 38（6）：728-731 doi: 10.12358/j.issn.1001-5620.2021.06.010
Citation: BA Wenxuan, WANG Zhengliang, WANG Changjun.Study on high temperature resistant compound gel plugging agent[J]. Drilling Fluid & Completion Fluid，2021, 38（6）：728-731 doi: 10.12358/j.issn.1001-5620.2021.06.010
shu

Study on High Temperature Resistant Compound Gel Plugging Agent

doi: 10.12358/j.issn.1001-5620.2021.06.010

  • School of chemistry and environmental engineering, Yangtze University，Jingzhou,Hubei 434023

  • Received Date: 2021-09-21
  • Publish Date: 2021-11-30
    Abstract
  • A new organic-inorganic compound gel plugging agent called CGPLUG was developed by adding sodium bentonite, sodium silicate, aluminum hydroxide, calcium oxide, magnesium hydroxide, ore powder, expansion agent, etc., and xanthan gum, konjac gum as Tackifier borax as cross-linking agent, and add with barite density adjustment. CGPLUG possesses good rheological properties at room temperature, especially excellente shear dilution and thixotropy, which is conducive to stay in the drilling loss channel. It can "stop" and is suitable for plugging different drilling loss channel. The gel strength of CGPLUG can reach more than 5000 g/cm2 at 80～200 ℃ temperatures, and the temperature resistance can reach 240 ℃ .CGPLUG has good plugging effect for quartz sand beds of different particle sizes (4～10 mesh, 10～20 mesh, 20～40 mesh) is good, and the Bearing Strength can reach more than 8.0 MPa.

     

    • FullText(HTML)
  • loading
    • References(14)
  • [1]
    徐同台, 刘玉杰. 钻井工程防漏堵漏技术[M]. 石油工业出版社, 1997.

    XU Tongtai, LIU Yujie. Leakage prevention and plugging technology in drilling engineering [M]. Petroleum industry press, 1997.
    [2]
    赵福豪,黄维安. 钻井液防漏堵漏材料研究进展[J]. 复杂油气藏,2020,13(4):96-100.

    ZHAO Fuhao, HUANG Weian. Research progress on prevention and plugging materials for drilling fluid lost circulation[J]. Complex Hydrocarbon Reservoirs, 2020, 13(4):96-100.
    [3]
    张希文,李爽,张洁,等. 钻井液堵漏材料及防漏堵漏技术研究进展[J]. 钻井液与完井液,2009,26(6):74-76.

    ZHANG Xiwen, LI Shuang, ZHANG Jie, et al. Research progress on lost circulation materials and lost circulation control technology[J]. Drilling Fluid & Completion Fluid, 2009, 26(6):74-76.
    [4]
    李锦峰. 恶性漏失地层堵漏技术研究[J]. 探矿工程(岩土钻掘工程),2019,46(5):19-27.

    LI Jinfeng. The status and development direction of plugging technology for severe circulation loss formation[J]. Drilling Engineering, 2019, 46(5):19-27.
    [5]
    张文哲,孙金声,白英睿,等. 抗高温纤维强化凝胶颗粒堵漏剂[J]. 钻井液与完井液,2020,37(3):269-274.

    ZHANG Wenzhe, SUN Jinsheng, BAI Yingrui, et al. A high temperature resistant gel reinforced with fiber used for lost circulatio[J]. Drilling Fluid & Completion Fluid, 2020, 37(3):269-274.
    [6]
    聂勋勇,王平全,张新民. 聚合物凝胶堵漏技术研究进展[J]. 钻井液与完井液,2007,24(1):82-84.

    NIE Xunyong, WANG Pingquan, ZHANG Xinmin. Progresses in gelling polymer sealing technology research[J]. Drilling Fluid & Completion Fluid, 2007, 24(1):82-84.
    [7]
    陈军. 聚合物凝胶堵漏剂研究进展[J]. 山东化工,2020,49(13):48-51.

    CHEN Jun. Research progress of polymer gel lost circulation material[J]. Shandong Chemical Industry, 2020, 49(13):48-51.
    [8]
    汪建军. 功能型复合凝胶自适应堵漏技术研究[D]. 四川大学, 2007.

    WANG Jianjun. Research on automatic lost circulation prevention technology of the functional compound gel [D]. Sichuan University, 2007.
    [9]
    李大勇,肖超,王胜建,等. 下扬子地区页岩气井失返性漏失堵漏技术研究[J]. 油气藏评价与开发,2021,11(2):122-126.

    LI Dayong, XIAO Chao, WANG Shengjian, et al. Plugging technology applied for total loss in shale gas wells of lower Yangtze Region: Taking Well-WY-1HF as an example[J]. Reservoir Evaluation and Development, 2021, 11(2):122-126.
    [10]
    李倍任. 复合离子型聚合物凝胶堵漏剂的研制[D]. 东北石油大学, 2015.

    LI Beiren. Research of composite ionic polymer gel plugging agent[D]. Northeast Petroleum University, 2015.
    [11]
    颜帮川,蒋官澄,胡文军,等. 高温延迟交联聚丙烯酰胺凝胶堵漏剂的研究[J]. 钻井液与完井液,2019,36(6):679-682.

    YAN Bangchuan, JIANG Guancheng, HU Wenjun, et al. Study on high temperature delayed crosslin PAM gel LCM[J]. Drilling Fluid & Completion Fluid, 2019, 36(6):679-682.
    [12]
    郭新健,于培志. 抗高温化学凝胶堵漏技术在顺北52X井的应用[J]. 钻井液与完井液,2019,36(2):189-193.

    GUO Xinjian, YU Peizhi. Controlling mud losses in well Shunbei 52x with high temperature chemical gelsk[J]. Drilling Fluid & Completion Fluid, 2019, 36(2):189-193.
    [13]
    王先洲,夏景刚,左洪国,等. 新型FM超级凝胶复合堵漏技术[J]. 钻井液与完井液,2015,32(6):50-53.

    WANG Xianzhou, XIA Jinggang, ZUO Hongguo, et al. A novel compound lost circulation material fm super geling[J]. Drilling Fluid & Completion Fluid, 2015, 32(6):50-53.
    [14]
    于澄. 聚合物凝胶堵漏技术研究[D]. 中国地质大学(北京), 2016.

    YU Cheng. Polymer gel plugging technology research[D]. China University of Geosciences (Beijing), 2016.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(3)  / Tables(2)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (679) PDF downloads(74) Cited by()
    Proportional views
    Related

    Copyright 《Drilling Fluid & Completion Fluid》津ICP备13002319号-1

    Address：Editorial Department of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei ProvinceChina Pos：062552

    Tel：（0317）2725487　2722354Email：zjyywjy@126.com

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return