Volume 38 Issue 6
Nov.  2021
Turn off MathJax
Article Contents
Article Navigation >  DRILLING FLUID & COMPLETION FLUID  > 2021  >  38(6): 715-720
YU Wenke, LIN Ling, LUO Yunxiang, et al.A self-adaptive shell powder plugging agent[J]. Drilling Fluid & Completion Fluid，2021, 38（6）：715-720 doi: 10.12358/j.issn.1001-5620.2021.06.008
Citation: YU Wenke, LIN Ling, LUO Yunxiang, et al.A self-adaptive shell powder plugging agent[J]. Drilling Fluid & Completion Fluid，2021, 38（6）：715-720 doi: 10.12358/j.issn.1001-5620.2021.06.008
shu

A Self-Adaptive Shell Powder Plugging Agent

doi: 10.12358/j.issn.1001-5620.2021.06.008
  • 1.

    College of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu 610500

  • 2.

    School of Petroleum Engineering, Southwest Petroleum University, Chengdu 610500

  • Received Date: 2021-08-25
  • Accepted Date: 2021-04-25
  • Publish Date: 2021-11-30
    Abstract
  • Multinucleated amorphous microcapsule can be made by wrapping shell powders with a gel polymer. This gel polymer was developed through polymerization, with acrylic acid (AA), acrylamide (AM), 2-acrylamide-2-methyl propanesulfonic acid (AMPS), N-vinylpyrrolidone (NVP) as the polymeric monomers, N,N-methylene-bisacrylamide (MBA) as the crosslinking agent, dodecyl methacrylate (DM) as the functional monomer, and ammonium persulfate-sodium bisulfite as the redox initiator. Laboratory studies showed that the gel polymer has the optimum performance at a mass ratio of AA∶AM = 1∶3. The multinucleated amorphous microcapsule plugging agent has good self-adaptive performance and excellent plugging capacity. It has minor effect on the rheology of the drilling fluid, and is resistant to high temperatures and salt contamination. After aging at 180 ℃ for 16 hours, the structure of the plugging agent still remains intact, and the API filter loss is 11.4 mL. Test of the plugging agent in an environmentally friendly mud system after aging at 150 ℃ for 16 hours showed that the invasion depth of filtrate into the medium pressure sand-bed was 28.74% of the whole thickness. The plugging agent with particle sizes distributed between 30 mesh and 50 mesh can be used to plug simulated fractures of 0.5 mm (width) × 5 mm (depth), and can withstand pressures up to 4 MPa.

     

    • FullText(HTML)
  • loading
    • References(18)
  • [1]
    徐哲. 一种新型外柔内刚型封堵剂的研制[J]. 钻井液与完井液,2020,37(6):726-730. doi: 10.3969/j.issn.1001-5620.2020.06.008

    XU Zhe. Research and development of a novel internal rigid external soft plugging agent[J]. Drilling & Production Technology, 2020, 37(6):726-730. doi: 10.3969/j.issn.1001-5620.2020.06.008
    [2]
    刘卫东,朱晓虎,蒋文海,等. 页岩微裂缝模拟实验评价[J]. 钻采工艺,2019,42(2):104-107.

    LIU Weidong, ZHU Xiaohu, JIANG Wenhai, et al. Evaluation of shale micro-fracture simulation experiments[J]. Drilling & Production Technology, 2019, 42(2):104-107.
    [3]
    狄丽丽,张智,段明,等. 超强吸水树脂堵漏性能研究[J]. 石油钻探技术,2007,35(3):33-36. doi: 10.3969/j.issn.1001-0890.2007.03.010

    DI Lili, ZHANG Zhi, DUAN Ming, et al. Research of plugging ability of super-absorbent resin[J]. Petroleum Drilling Techniques, 2007, 35(3):33-36. doi: 10.3969/j.issn.1001-0890.2007.03.010
    [4]
    张战. 钻井液用柔性颗粒封堵剂研制[D]. 青岛: 中国石油大学(华东) , 2018.

    ZHANG Zhan. Research of flexible particle plugging agent on drilling fluids[D]. Qingdao: China University of Petroleum(East China), 2018.
    [5]
    周佩,李谦定,李辉,等. 体膨型堵漏材料及其堵漏机理研究进展[J]. 油田化学,2009,26(1):111-114.

    ZHOU Pei, LI Qianding, LI Hui, et al. Advances in development of expandible lost circulation materials[J]. Oilfield Chemistry, 2009, 26(1):111-114.
    [6]
    ZHANG Zhan, LYU Kaihe.Research of flexible particle plugging agent[C]// Beijing:International Petroleum and Petrochemical Technology Conference, IPPTC-20182051.
    [7]
    常冬梅,齐赫东,郭丽梅. 储层改造可降解暂堵剂的制备及表征[J]. 精细化工,2018,35(10):1745-1750.

    CHANG Dongmei, QI Hedong, GUO Limei. Preparation and characterization of degradable temporary plugging agent for reservoir reconstruction[J]. Fine Chemicals, 2018, 35(10):1745-1750.
    [8]
    ZHU Daoyi , FANG Xingyu, SUN Renxian, et al. Development of degradable pre-formed particle gel (DPPG) as temporary plugging agent for petroleum drilling and production[J]. Petroleum Science, 2021（18）479-494.
    [9]
    张家旗. 淀粉基可降解暂堵剂研制及在钻井液中的应用[D]. 青岛: 中国石油大学(华东), 2018.

    ZHANG Jiaqi. Development and application of starch-based degradable temporary plugging agent in drilling fluid[D]. Qingdao: China University of Petroleum(East China), 2018.
    [10]
    王增宝,赵修太,陈木君泽,等. 基于架状结构内核的热采井内刚外柔颗粒堵剂研究及应用[J]. 西安石油大学学报(自然科学版),2017,32(2):86-92.

    WANG Zengbao, ZHAO Xiutai, CHENMU Mujunze, et al. Research and application of particulated plugging agent with hard framework core and soft external structure for thermal production wells[J]. Journal of Xi'an Shiyou University( Natural Science Edition), 2017, 32(2):86-92.
    [11]
    刘永兵,蒲万芬,胡琴. P(AA-AM)/MM T预交联凝胶颗粒调剖技术[J]. 地质科技情报,2005,24(2):105-108. doi: 10.3969/j.issn.1000-7849.2005.02.019

    LIU Yongbin, PU Wanfen, HU Qin. Synthesis and properties of P(AA-AM)/MMT water-swellable polymer as water-plugging and profile-modification agent[J]. Bulletin of Geological Science and Technology, 2005, 24(2):105-108. doi: 10.3969/j.issn.1000-7849.2005.02.019
    [12]
    苗娟. 可控膨胀堵漏剂的研制与性能研究[D]. 成都: 西南石油大学, 2010.

    MIAO Ju. Development and performance research of controllable expansion plugging agent[D]. Chengdu: Southwest Petroleum University, 2010.
    [13]
    郝琦玮,段晓宁,王趁义,等. 海洋生物质材料/无机矿物材料改进高吸水树脂的研究进展[J]. 化工新型材料,2017,45(7):18-20.

    HE Qiwei, DUAN Xiaoning, WANG Zhenyi, et al. Research progress of super absorbent resin modified by marine biomass/inorganic mineral[J]. New Chemical Materials, 2017, 45(7):18-20.
    [14]
    葛柳钦. 贝壳粉体的功能化及其在吸附材料和高分子复合材料中的应用[D]. 杭州: 浙江大学, 2018.

    GE Liuqin. Functionalization of shell waste and its application in adosrbents and polymer composites [D].Hangzhou: Zhejiang University, 2018.
    [15]
    李岩. 抗高温高强度凝胶堵漏技术的研究[D]. 北京: 中国石油大学(北京), 2017.

    LI Yan. Study on plugging technology of high temperature and high strength gel[D]. Beijing: China University of Petroleum (Beijing), 2017.
    [16]
    牛磊星,孙平贺. 丙烯酸高吸水膨胀树脂在深部钻探中的堵漏试验[J]. 地质科技情报,2017,36(1):208-212.

    NIU Leixing, SUN Pinghe. Experimental study on the plugging of acrylic acid high water absorbing resin in deep drilling.[J]. Bulletin of Geological Science and Technology, 2017, 36(1):208-212.
    [17]
    张彬,肖霄,韩芸娇,等. 碳酸钙三级红外光谱研究[J]. 无机盐工业,2021,53(1):97-101. doi: 10.11962/1006-4990.2020-0083

    ZHANG Bin, XIAO Xiao, HAN Yunjiao, et al. Study on third-step infrared spectroscopy of calcium carbonate[J]. Inorganic Chemicals Industry, 2021, 53(1):97-101. doi: 10.11962/1006-4990.2020-0083
    [18]
    褚奇, 罗平亚, 冯俊雄, 等. 抗高温有机硅共聚物降滤失剂的合成与性能[J]. 石油化工, 2011, 40(9): 991-996.

    CHU Qi, LUO Pingya, FENG Junxiong, et al. Synthesis and properties of an organosilicon copolymer used as high temperature fluid loss control additive[J]. Petrochemical Technology, 2011, 40(9) : 991-996.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(4)  / Tables(4)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (624) PDF downloads(68) Cited by()
    Proportional views
    Related

    Copyright 《Drilling Fluid & Completion Fluid》津ICP备13002319号-1

    Address：Editorial Department of Drilling Fluid and Completion Fluid, Bohai Drilling Engineering Institute, Yanshan South Road, Renqiu City, Hebei ProvinceChina Pos：062552

    Tel：（0317）2725487　2722354Email：zjyywjy@126.com

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return