伊拉克南部油田<i>φ</i>244.5 mm套管环空带压补救技术

王翔宇; 刘文明; 林志辉; 刘金鹏; 李文文; 桑明; 李中国

doi:10.3969/j.issn.1001-5620.2021.03.017

伊拉克南部油田φ244.5 mm套管环空带压补救技术

doi: 10.3969/j.issn.1001-5620.2021.03.017

渤海钻探工程有限公司第二固井分公司, 天津 300280

详细信息

作者简介:

中图分类号: TE256.6
计量
- 文章访问数: 420
- HTML全文浏览量: 118
- PDF下载量: 51
- 被引次数: 0
出版历程
- 收稿日期: 2020-01-09

Remedy of Sustained Casing Pressure in φ244.5 mm Casing Annulus in South Oilfield of Iraq

No. 2 Cementing Branch Bohai Drilling Engineering Companty, Ltd., Tianjin 300280

摘要

摘要: 伊拉克南部哈法亚、米桑等油田存在异常高压盐膏地层，部分井固井后环空带压（0.69～17.24 MPa），严重影响后期开发，针对上述问题，优选可固化环氧树脂进行封堵作业。评价了环氧树脂稠化时间、抗压强度、流变等综合性能，实验结果表明：通过调整固化剂加量，环氧树脂工作液稠化时间在100～500 min范围内可调，48 h抗压强度大于50 MPa，流性指数大于0.94，稠度系数小于0.10 Pa·sⁿ。现场采用阶梯式挤注环氧树脂进行封堵作业，挤入量达到100 L以上，现场实施3井次，72 h后井口压力降低为零，成功解决伊拉克南部油田高压盐膏层φ244.5 mm技术套管环空带压问题，对环空带压井治理具有一定借鉴作用。
- 高压盐膏层 /
- 环空带压 /
- 环氧树脂 /
- 阶梯式挤注
Abstract: Sustained casing pressure was encountered when cementing the wells penetrating abnormally high-pressure salt/gypsum formations in the Halfaya Oilfield and the Missan Oilfield in the south of Iraq. The sustained casing pressure was in a range of 0.69-17.24 MPa, seriously affecting the later development of the oilfields. A curable epoxy resin was used to solve this problem. Laboratory test was conducted to evaluate the thickening time, compressive strength and rheology of the epoxy resin fluid. The test results showed that by changing the concentration of the solidifying agent in the epoxy resin fluid, the thickening time of the epoxy resin fluid can be adjusted between 100 min and 500 min, the 48-hour compressive strength of the epoxy resin fluid can be greater than 50 MPa, the flow index of the epoxy resin is greater than 0.94, and the consistency coefficient is less than 0.10 Pa·sⁿ. In field operation, the epoxy resin was squeezed and injected stepwise into the well and plug it. The total volume of epoxy resin fluid used was more than 100 L and the plugging operation with epoxy resin was done for three times in three wells. After 72 hours of squeezing the epoxy resin, the wellhead pressure was reduced to zero. Using this method, the sustained casing pressure in the φ244.5 mm casing annulus encountered in the south oilfields of Iraq was successfully solved. This technology can be used to solve similar sustained casing pressure problem.
- High pressure salt and gypsum formation /
- Sustained casing pressure /
- Epoxy resin /
- Stepwise squeeze and inject

HTML全文

参考文献(13)

[1]	刘洋,鲜明,冯予淇. 川中高压气井钻完井期间环空带压原因分析及应对固井技术[J]. 钻井液与完井液, 2018,35(1):77-82. LIU Yang,XIAN Ming,FENG Yuqi. Causes of trapped annular pressure in high pressure gas wells in central Sichuan and well cementing solution[J]. Drilling Fluid & Completion Fluid,2018,35(1):77-82.
[2]	宋建建,许明标,吴宇萌,等. 气井环空带压形成原因及研究进展[J]. 科技通报,2018,35(9):8-12. SONG Jianjian,XU Mingbiao,WU Yumeng,et al. Causes and research progress of annular pressure in gas wells[J]. Bulletin of Science and Technology,2018,35(9):8-12.
[3]	宋建建, 陈小龙, 许明标, 等. 页岩气井环空带压防治难点分析及对策[J]. 钻采工艺,2019,42(2):32-35. SONG Jianjian,CHEN Xiaolong,XU Mingbiao, et al. Analysis and difficulties in prevention and control of annular pressure in shale gas wells[J]. Drilling & Production Technology, 2019,42(2):32-35.
[4]	李早元.有助于改善层间封隔能力的聚合物多元水泥体系材料特性研究[D]. 成都:西南石油大学,2006. LI Zaoyuan. Study on material properties of polymer multi-component cement system for improving interlayer sealing ability[D]. Chengdu:Southwest Petroleum University, 2006.
[5]	符军放,赵琥,项先忠. 一种固井合成水泥石的研制与室内评价[J]. 钻井液与完井液, 2015,32(2):61-63. FU Junf ang,ZHAO Hu,XIANG Xi anzhong. Development and laboratory evaluation of a synthetic cement for cementing[J].Drilling Fluid & Completion Fluid,2015,32(2):61-63.
[6]	王照辉,崔凯潇,蒋官澄,等. 基于形状记忆环氧树脂聚合物的温敏可膨胀型堵漏剂研制及性能评价[J]. 钻井液与完井液,2020,37(4):412-420. WANG Zhaohui,CUI Kaixiao,JIANG Guancheng, et al. Development and evaluation of a temperaturesensitive expandable lost circulation material made from a shape memory epoxy polymer[J]. Drilling Fluid & Completion Fluid,2020, 37(4):412-420.
[7]	曹成章,步玉环, 田磊聚, 等. 可固化树脂基固井材料及其固化剂的优选[J]. 钻井液与完井液,2020,37(4):498-506. CAO Chengzhang,BU Yuhuan,TIAN Leiju,et al. Selection of curable resin based cementing material and the curing agent thereof[J]. Drilling Fluid & Completion Fluid,2020,37(4):498-506.
[8]	李星,申连华. 环氧树脂的改性研究进展及发展趋势[J]. 云南化工, 2017, 44(6):13-15 . LI Xing, SHEN Lianhua. Research progress and development trend of epoxy resin modification[J]. Yunnan Chemical Technology,2017, 44(6):13-15
[9]	武龙,沈宁祥. 水性环氧树脂研究进展[J]. 化学与黏合, 2001(6):268-269. WU Long, SHEN Ningxiang. Research progress of waterborne epoxy resin[J]. Chemistry and Adhesion, 2001(6):268-269.
[10]	刘廷栋,王乃昌,许鑫平. 环氧树脂的固化机理[J]. 热固性树脂, 1989(2):38-48. LIU Tingdong, WANG Naichang, XU Xinping. Curing mechanism of epoxy resin[J]. Thermosetting resin, 1989(2):38-48.
[11]	卢海川,李宗要,高继超,等. 油气井用合成树脂胶凝材料研究综述[J]. 钻井液与完井液,2018,35(5):1-7. LU Haichuan, LI Zongyao, GAO Jichao, et al. Review of studies on synthetic resin cementitious materials used in oil and gas wells[J]. Drilling Fluid & Completion Fluid, 2018, 35(5):1-7.
[12]	BRYCE LONDON,BRAD TENNISON,JEFFER KARCHER,et al. Unconventional remediation in the Utica Shale using advanced resin technologies[R]. SPE 165699.
[13]	王纯全,邓理,李美平. 等. 新型环氧树脂在四川壳牌区块弃井项目的应用[J]. 钻采工艺,2019,35(5):110-112. WANG Chunquan, DENG Li, LI Meiping, et al. Application of new epoxy resin in abandoned well project in Sichuan shell block[J]. Drilling & Production Technology,2019, 35(5):110-112.