Selection of Curable Resin Based Cementing Material and the Curing Agent thereof
-
摘要: 水泥基固井材料存在脆性大、抗腐蚀性差等缺点,在油气井长期生产过程中易发生脆性破坏导致环空带压、层间窜流等问题。可固化树脂基固井材料具有强度高、弹性模量低、弹塑性强等优点,具有作为固井材料的潜力。通过对几种主要可固化树脂基材料进行分析,在对适合固井需求的环氧树脂优选和固化剂初选的基础上,提出了一种使用黏度-时间曲线代替水泥浆研究中常用的稠化曲线来评价树脂基固井液稠化过程的方法,通过实验进行了树脂固化液体系的优选。结果表明,HSPT固化剂可操作时间较长,反应产物抗压强度超过70 MPa,弹性模量低于3 GPa,气测渗透率低,适合50~90℃下的油气井固井;聚醚胺固化剂的固化产物抗压强度超过75 MPa,弹性模量小于2 GPa,适合30~50℃下的油气井固井。Abstract: Cement as the main component of well cementing material, has the disadvantages of high brittleness and poor corrosion resistance. Oil and gas wells cemented with cement slurry are susceptible to brittle failure which in turn results in pressurizing in annulus and channeling across layers. Curable resin based cementing materials have many advantages over cement, such as high strength, low elastic modulus and strong elasticity, hence can be used in well cementing. Several curable resins have been analyzed and epoxy resin was finally chosen as the cementing material. A curing agent was also selected for use with epoxy resin. In evaluating the thickening process of the resin based cementing material, a viscosity-time curve was used to replace the old thickening curve. Laboratory experiments were conducted to optimize the curing fluid. It was found that HSPT, a curing agent, remained in working status for a longer time than other curing agents. The reaction product of HSPT had compressive strength of greater than 70 MPa, elastic modulus of less than 3 GPa, and low gas permeability, suitable for well cementing at 50 - 90 ℃. The reaction product of another polyetheramine curing agent had compressive strength of greater than 75 MPa and elastic modulus of less than 2 GPa, which is suitable for well cementing at 30 - 50 ℃.
-
Key words:
- Pressurizing in annulus /
- Epoxy resin /
- Curing agent /
- Compressive strength /
- Elastic modulus
-
[1] 齐奉忠, 刘硕琼, 袁进平. 气井环空带压的原因分析及解决措施浅析[C]//石油钻井院所长会议, 2008. QI Fengzhong, LIU Shuoqiong, YUAN Jinping. Analysis of causes and solutions of annulus pressure in gas well[C]//Meeting of Directors of Petroleum Drilling Institute, 2008. [2] 古小红, 母建民, 石俊生, 等. 普光高含硫气井环空带压风险诊断与治理[J]. 断块油气田, 2013, 20(5):663-666.GU Xiaohong, MU Jianmin, SHI Junsheng, et al.Diagnosing and managing on risk of annular casing pressure in high-sulfur gas well of Puguang gas field[J]. Fault-Block Oil & Gas Field, 2013, 20(5):663-666. [3] 马小龙. 焦石坝工区页岩气整体固井技术[J]. 石油钻采工艺, 2017, 39(1):57-60.MA Xiaolong. Overall cementing technologies used for shale gas wells in Jiaoshiba block[J]. Oil Drilling & Production Technology, 2017, 39(1):57-60. [4] WellLock® resin system[EB/OL].https://www.halliburton.com/en-US/ps/cementing/cementing-solutions/slurries-cements/lockcem.html. [5] 黎凌, 张宗谭, 周莜宁, 等. 水乳环氧树脂对水硬性凝胶工作液性能的影响[J]. 西安石油大学学报(自然科学版), 2019, 34(1):108-114. LI Ling, ZHANG Zongtan, ZHOU Xiaoning, et al. Influence of waterborne epoxy resin emulsion on performance of hydrogel working fluid[J]. Journal of Xi'an Shiyou University(Natural Science Edition), 2019, 34(1):108-114. [6] 赵玉春, 刘浩, 李智慧, 等. 环氧树脂中温潜伏型固化剂研究进展[J]. 热固性树脂, 2019, 34(4):66-70.ZHAO Yuchun, LIU Hao, LI Zhihui, et al. Research progress of medium temperature latent curing agent for epoxy resin[J]. Thermosetting Resin, 2019, 34(4):66-70. [7] 阎培渝, 岳蕾, 代丹, 等. 环氧树脂乳液对油井水泥石水化过程和力学性能的影响[J]. 硅酸盐通报, 2016, 35(7):2019-2023.YAN Peiyu, YUE Lei, DAI Dan, et al. Effect of epoxy resin on the hydration and mechanical property of oil well cement stone[J]. Bulletin of the Chinese Ceramic Society, 2016, 35(7):2019-2023. [8] 顾香. 防H2S腐蚀TH树脂水泥浆体系研究[D]. 成都:西南石油大学, 2012. GU Xiang. Study on TH resin cement slurry system for preventing H2S corrosion[D]. Chengdu:Southwest Petroleum University, 2012. [9] 刘昱亮, 李早元, 薛元陶, 等. 固井水性环氧树脂水泥石力学性能研究[J]. 硅酸盐通报, 2019, 38(2):339-343.LIU Yuliang, LI Zaoyuan, XUE Yuantao, et al. Study on mechanical properties of cementing waterborne epoxy cement[J]. Bulletin of the Chinese Ceramic Society, 2019, 38(2):339-343. [10] 郭辛阳, 步玉环, 李娟, 等. 井下复杂条件下固井水泥环的失效方式及其预防措施[J]. 天然气工业, 2013, 33(11):86-91.GUO Xinyang, BU Yuhuan, LI Juan, et al. Modes and prevention of cement sheath failures under complex downhole conditions[J]. Natural Industry, 2013, 3(311):86-91. [11] 王澜, 王佩璋, 陆晓中. 高分子材料[M]. 中国轻工业出版社, 2009. WANG Lan, WANG Peizhang, LU Xiaozhong. Polymer materials[M]. China light industry press, 2009. [12] 李建章, 李文军, 周文瑞, 等. 脲醛树脂固化机理及其应用[J]. 北京林业大学学报, 2007(4):90-94. LI Jianzhang, LI Wenjun, ZHOU Wenrui, et al. Curing mechanism of urea-formaldehyde resin and its application[J]. Journal of Beijing Forestry University, 2007(4):90-94. [13] 李光东. 脲醛树脂胶黏剂[M]. 化学工业出版社, 2002. LI Guangdong. Urea-formaldehyde resin adhesive[M]. Chemical Industry Press, 2002. [14] 黄发荣, 焦杨声. 酚醛树脂及其应用[M]. 化学工业出版社, 2003. HUANG Farong, JIAO Yangsheng. Phenolic resin and its application[M]. Chemical Industry Press, 2003. [15] 胡玉明. 环氧树脂固化剂及添加剂[M]. 化学工业出版社, 2011. HU Yuming. Epoxy resin curing agent and additives[M]. Chemical Industry Press, 2011. [16] 刘丹, 伍方, 赵文杰, 等. 环氧树脂防腐性能研究进展[J]. 中国材料进展, 2015, 34(11):852-861.LIU Dan, WU Fang, ZHAO Wenjie, et al. Advance in anticorrosion performance of epoxy resin[J]. Materials China, 2015, 34(11):852-861. [17] 宫大军, 魏伯荣, 柳丛辉. 不饱和聚酯树脂增韧改性的研究进展[J]. 绝缘材料, 2009, 42(6):36-40.GONG Dajun, WEI Borong, LIU Conghui. The research progress of toughening modification for unsaturated polyester resin[J]. Insulating Materials, 2009, 42(6):36-40. [18] 张文军, 朱春宇. 不饱和聚酯树脂改性研究进展[J]. 热固性树脂, 2007(4):41-43, 46.ZHANG Wenjun, ZHU Chunyu. Advances in modification of unsaturated polyester resin[J]. Thermosetting Resin, 2007(4):41-43, 46. [19] 谭家顶, 程珏, 郭晶, 等. 几种胺类固化剂对环氧树脂固化行为及固化物性能的影响[J]. 化工学报, 2011, 62(6):1723-1729.TAN Jiading, CHENG Jue, GUO Jing, et al. Effect of amine curing agents on curing behavior of epoxy resin and properties of cured compounds[J]. Ciesc Journal, 2011, 62(6):1723-1729. [20] 刘明哲, 冯望成, 敬波, 等. 一种室温快速固化超强环氧树脂胶黏剂的制备及性能[J]. 化学与黏合, 2017, 39(6):435-437, 444. LIU Mingzhe, FENG Wangcheng, JING Bo, et al. Preparation and properties of an epoxy resin adhesive with high strength and room temperature fast curing property[J]. Chemistry and Adhesion, 2017, 39(6):435-437, 444. [21] 曾娟娟, 杨元龙, 马哲. 低温固化环氧树脂灌浆材料的性能研究[J]. 新型建筑材料, 2017, 44(10):112-115.ZENG Juanjuan, YANG Yuanlong, MA Zhe. Study on the properties of low-temperature curing epoxy-resin grouting material[J]. New Building Materials, 2017, 44(10):112-115. [22] 钟辉, 黄红军, 王晓梅, 等. 环氧固化剂及其应用与发展[J]. 装备环境工程, 2016, 13(4):136-142.ZHONG Hui, HUANG Hongjun, WANG Xiaomei, et al. Application and development of epoxy curing agent[J]. Equipment Environmental Engineering, 2016, 13(4):136-142. [23] 王钟熠, 张连红, 梁红玉. 环氧树脂室温快速固化剂的合成[J]. 合成树脂及塑料, 2013, 30(3):25-28.WANG Zhongyi, ZHANG Lianhong, LIANG Hongyu. Synthesis of epoxy resin fast curing agent at room temperature[J]. China Synthetic Resin and Plastics, 2013, 30(3):25-28. [24] 苏亚, 谢小林, 陈鹏群, 等. 环氧树脂室温快速固化剂的研究[J]. 热固性树脂, 2017, 32(5):42-45.SU Ya, XIE Xiaolin, CHEN Pengqun, et al. Research on the fast curing agent at room temperature for epoxy resin[J]. Thermosetting Resin, 2017, 32(5):42-45. [25] 苏曹宁, 范广宏, 陈蕴博. RTM用中温固化环氧树脂基体的研究[J]. 热固性树脂, 2014, 29(2):14-17, 21. SU Caoning, FAN Guanghong, CHEN Yunbo. Study on the moderate temperature curing epoxy matrix for resin transfer molding[J]. Thermosetting Resin, 2014, 29(2):14-17, 21. [26] 王肖宾, 王芳. 中温固化热熔胶膜法制备环氧树脂预浸料及其复合材料[J]. 黏接, 2017, 38(9):34-38, 43. WANG Xiaobin, WANG Fang. Preparation of epoxy resins prepreg and its composites curable at middle temperature via hot melt film method[J]. Adhesion, 2017, 38(9):34-38, 43. [27] 潘锦平, 范和平, 李桢林. 中温潜伏性固化剂在环氧胶黏剂中的研究进展[J]. 化学与黏合, 2010, 32(6):45-49, 54. PAN Jinping, FAN Heping, LI Zhenlin. The progress in research on the moderate temperature latent curing agent for epoxy adhesives[J]. Chemistry and Adhesion, 2010, 32(6):45-49, 54. [28] 苏曹宁, 任明伟, 何琪, 等. 低粘度中温固化环氧树脂基体的研究[J]. 热固性树脂, 2012, 27(3):46-49.SU Caoning, REN Mingwei, HE Qi, et al. Study on moderate temperature curing epoxy resin with low viscosity[J]. Thermosetting Resin, 2012, 27(3):46-49. [29] 王斌, 谢瑞广, 丘哲明, 等. 一种湿法缠绕用中温固化环氧树脂体系[J]. 化学与黏合, 2003(6):271-273, 282.WANG Bin, XIE Ruiguang, QIU Zheming, et al. A moderate temperature curing epoxy resin system for wet fiber-winding[J]. Chemistry and Adhesion, 2003(6):271-273, 282. [30] 谢瑞广, 丘哲明, 王斌, 等. 先进复合材料中温固化树脂基体的研究[J]. 航空材料学报, 2003(S1):175-178. XIE Ruiguang, QIU Zheming, WANG Bin, et al. Study on resin matrix of advanced composite[J]. Journal of Aeronautical Materials, 2003(S1):175-178. [31] 陈平, 刘胜平, 王德中. 环氧树脂及其应用[M]. 化学工业出版社, 2011. CHEN Ping, LIU Shengping, WANG Dezhong. Epoxy resin and its application[M]. Chemical Industry Press, 2011. [32] 欧红娟, 李明, 蒙飞, 等. 长封固段大温差固井水泥浆技术研究进展[J]. 硅酸盐通报, 2017, 36(1):104-109.OU Hongjuan, LI Ming, MENG Fei, et al. Research progress on key technologies of cementing slurry for long sealing section and large temperature difference[J]. Bulletin of the Chinese Ceramic Society, 2017, 36(1):104-109. [33] 房恩楼, 李浩然, 张浩, 等. 一种低温低密度可固化隔离液的研制与性能评价[J]. 钻井液与完井液, 2020, 37(1):86-92.FANG Enlou, LI Haoran, ZHANG Hao, et al. Development and performance evaluation of a low temperature low density solidifiable spacer fluid[J]. Drilling Fluid & Completion Fluid, 2020, 37(1):86-92. [34] ASTM. Standard test method for young's modulus, tangent modulus and Chord Modulus E 111-04[S]. ASTM Standards, 2004. [35] 孙曼灵. 环氧树脂应用原理与技术[M]. 机械工业出版社, 2002. SUN Manling. Application principle and technology of epoxy resin[M]. Machinery Industry Press, 2002.
点击查看大图
计量
- 文章访问数: 719
- HTML全文浏览量: 191
- PDF下载量: 156
- 被引次数: 0