油套管钢在甲酸盐-磷酸盐复配完井液中的腐蚀行为

马磊; 岳小琪; 赵密锋; 张慧娟; 邢星; 王华; 张雷; 路民旭

doi:10.3969/j.issn.1001-5620.2020.03.023

油套管钢在甲酸盐-磷酸盐复配完井液中的腐蚀行为

doi: 10.3969/j.issn.1001-5620.2020.03.023

1. 中国石油塔里木油田公司油气工程研究院, 新疆库尔勒 841000;
2. 北京科技大学新材料技术研究院, 北京 100083

基金项目:

国家重大科技专项“超深超高压高温气井优快捷井与采气技术”课题中央财政资金（2016ZX05051003）

详细信息

作者简介:
马磊,工程师,1989年生,现在从事石油专用管及装备腐蚀与防护工作。E-mail:zhanglei@ustb.edu.cn

中图分类号: TE257
计量
- 文章访问数: 1053
- HTML全文浏览量: 377
- PDF下载量: 75
- 被引次数: 0
出版历程
- 收稿日期: 2020-02-23
- 刊出日期: 2020-06-28

The Corrosion Behavior of Tubing and Casing Steels in Formate-Phosphate Compound Completion Fluid

1. Petrochina Tarim Oilfield Company, Shihua RD, Korla, Xinjiang 841000;
2. Institute for Advanced Material and Technology, Material Science and Technology Beijing, Beijing 100083

摘要

摘要: 采用高温高压模拟浸泡试验并结合多种表面分析手段，对超级13Cr马氏体不锈钢（油管钢）和P110碳钢（套管钢）在不同体积百分比的甲酸钾-焦磷酸钾复配完井液的腐蚀行为进行了研究。结果表明，对于超级13Cr马氏体不锈钢，复配完井液的主要腐蚀风险来源于其中的S元素夹杂，产物膜中S的富集是造成其耐蚀性降低的主要原因；而对于P110碳钢，高温下腐蚀产物厚且疏松，甲酸盐比例的增加可以缓解其表面腐蚀产物的沉积，从而提高产物膜的致密性，提高其高温耐蚀性。
- 焦磷酸钾 /
- 甲酸钾 /
- 超级13Cr /
- P110碳钢
Abstract: The corrosion behavior of the 13Cr super-martensitic stainless steel (tubing steel) and P110 carbon steel (casing steel) in completion fluid formulated with potassium formate and potassium pyrophosphate in different volumetric ratios was studied with high temperature high pressure simulated soaking test method. It was found in the test that corrosion of the 13Cr super-martensitic stainless steel in the compound completion fluid comes from the inclusion of S element in the steel; enrichment of S in the product film of the steel is the major factor for the deterioration of its corrosion resistance. For the P110 carbon steel, the corrosion product at high temperatures is thick and loose. An increase in the ratio of formate in the compound completion fluid can mitigate the deposition of corrosion product on the surface of the P110 steel, thereby enhancing the tightness of the product film and improving the high temperature corrosion resistance of the steel.
- Potassium pyrophosphate /
- Potassium formate /
- 13Cr super-martensitic steel /
- P110 carbon steel

HTML全文

参考文献(14)

[1]	陈乐亮, 汪桂娟. 甲酸盐基钻井液完井液体系综述[J]. 钻井液与完井液, 2003, 20(1):31-36. CHEN Leliang, WANG Guijuan. An overview of formate base drilling and completion fluids system[J]. Drilling Fluid & Completion Fluid, 2003, 20(1):31-36.
[2]	刘福国. 油田钻具、管道系统腐蚀规律及缓蚀剂缓蚀性能和机制研究[D]. 青岛:中国海洋大学, 2008. LIU Fuguo. The study of corrosion mechanism of drill pipe and pipline, inhibition and mechanism of the inhibitor for drill pipe and pipeline[D]. Qingdao:Ocean University of China, 2008.
[3]	楼一珊, 郑力会. 基于有机盐钻井液的稳定井壁新技术应用研究[J]. 石油天然气学报, 2005, 27(6):888-890. LOU Yishan, ZHENG Lihui. A novel technology for stabilizing borehole by using organic-salts drilling fluids[J].Journal of Oil and Gas Technology, 2005, 27(6):888-890.
[4]	陈乐亮, 汪桂娟. 甲酸盐基钻井液完井液体系综述(续)[J]. 钻井液与完井液, 2003, 20(2):33-38. CHEN Leliang, WANG Guijuan. Overview of formatebased drilling and completion fluids(continued)[J]. Drilling Fluid & Completion Fluid, 2003, 20(2):33-38.
[5]	杨振杰. 环保钻井液技术现状及发展趋势[J]. 钻井液与完井液, 2004, 21(2):39-42. YANG Zhenjie. Present state of environmental protection drilling fluid and its development direction[J].Drilling Fluid & Completion Fluid, 2004, 21(2):39-42.
[6]	周代生, 王小石, 兰太华. 新疆台60井PRT-有机盐钻井液技术[J]. 钻井液与完井液, 2008, 25(1):76-80. ZHOU Daisheng, WANG Xiaoshi, LAN Taihua. Organic salt drilling fluid technology:well Tai-60[J]. Drilling Fluid & Completion Fluid, 2008, 25(1):76-80.
[7]	赵金洲, 赵金海, 薛玉志, 等. 胜利油田保护储层的水平井钻、完井液技术[J]. 石油钻采工艺, 2009, 31(6):64-69. ZHAO Jinzhou, ZHAO Jinhai, XUE Yuzhi, et al. Drilling and completion fluids with reservoir protection of horizontal wells in Shengli oilfield[J]. Oil Drilling & Production Technology, 2009, 31(6):64-69.
[8]	TANG B, TANG Z, GENG Y, et al. Drilling and completion technologies for efficient exploitation of lowpermeability oil & gas fields in China:A state-of-the-art review[J].Natural Gas Industry, 2013, 33(2):65-70.
[9]	刘斌, 徐金凤, 蓝强, 等. 甲酸盐及其在钻井液中的应用[J]. 西部探矿工程, 2007, 19(12):73-77. LIU Bin, XU Jinfeng, LAN Qiang, et al. Formate and its application in drilling fluid[J]. West-China Exploration Engineering, 2007, 19(12):73-77.
[10]	DOWNS J, HOWARD S, CARNEGIE A.Improving hydrocarbon production rates through the use of formate fluids-A review[C]//SPE International Improved Oil Recovery Conference in Asia Pacific, Kuala Lumpur, Society of Petroleum Engineers, 2005.
[11]	万里平, 孟英峰, 伊成先. P110钢在有机盐完井液中的腐蚀行为[J]. 钻井液与完井液, 2007, 24(1):17-19. WAN Liping, MENG Yingfeng, YI Chengxian. Corrosion of the P110 steel in organic completion fluids[J]. Drilling Fluid & Completion Fluid, 2007, 24(1):17-19.
[12]	SIMPSON M A, ALREDA S, FOREMAN D, et al. Application and recycling of sodium and potassium formate brine drilling fluids for ghawar field HTHP gas wells[C]//Offshore Technology Conference, Houston, 2009.
[13]	杨向同, 肖伟伟, 刘洪涛, 等. 甲酸盐对套管/油管腐蚀速率评价方法与影响因素[J]. 钻井液与完井液, 2016, 33(6):51-57. YANG Xiangtong, XIAO Weiwei, LIU Hongtao, et al. Method of evaluating corrosion rate of formates to casing and tubing strings and the influencing factors[J]. Drilling Fluid & Completion Fluid, 2016, 33(6):51-57.
[14]	CHEN J, ASMUSSEN R M, ZAGIDULIN D, et al. Electrochemical and corrosion behavior of a 304 stainlesssteel-based metal alloy wasteform in dilute aqueous environments[J].Corrosion Science,2012,66(1):142-152.