A New Low-Cost High-Density Solids Free Anti-Scaling Compound Salt Kill Mud
-
摘要: 高温高压油气藏所用的普通压井液包含的溴盐、锌盐、重钙等与地层水配伍性差、易污染地层、具有高腐蚀性,且甲酸盐高密度压井液成本高,针对这些难题采用高效阻垢技术并研制了一种新型加重剂,同时广泛选用廉价的无机盐用于配制基液,研发了一种新型低成本防结垢复合盐高密度无固相压井液体系。该体系不含固相成分,不含钙镁等易结垢的二价离子,全部为一价盐,密度最高可达1.70 g/cm3,且与同级别甲酸盐体系相比成本可降低50%以上,同时保留了甲酸盐体系的全部优点,满足国家新安全环保法低损害、低成本、高密度、无固相、无毒性的要求。该技术在大港油田先导性应用1口井,平均恢复期1 d,平均恢复率100%,油层保护效果显著。Abstract: Bromide, zinc salts and heavy calcium salts used in kill mud for HTHP reservoirs have poor compatibility with formation waters, formation contamination and high corrosivity. High density kill muds formulated with formats are quite expensive. A new weighting agent was recently developed with the help of efficient scale inhibiting technology. Using this weighting agent, a low-cost high-density solids free anti-scaling compound salt kill mud was formulated. The base fluid of the kill mud was formulated with some cheap inorganic salts. This kill mud is free of calcium and magnesium ions, all salts presented in the kill mud are monovalent salts. The maximum density of the kill mud is 1.70 g/cm3. This kill mud, with its cost being only 50% of a formate kill mud of the same density, retains all the advantages of the formate kill mud. The new kill mud is low damage, lost cost, high density, solids free and nontoxic., satisfying the requirements of the new national safety and environment protection laws. Pilot test of the new kill mud on a well drilled in Dagang Oilfield showed that the average yield recovery period of the well was 1 d and the average percent recovery of yield was 100%, demonstrating that the kill mud has the capacity of reservoir protection.
-
Key words:
- Kill mud /
- Low-cost /
- Solids free /
- Anti-scaling /
- Compound salt /
- High-density
-
[1] 刘平德, 刘承华, 廖仕孟, 等. 新型无固相压井液的研制及性能评价[J]. 天然气工业, 2004, 25(4):83-85.LIU Pingde, LIU Chenghua, LIAO Shimeng, et al. Development of novel solid-free well control fluid and its behavior evaluation[J].Natural Gas Industry, 2005, 25(4):83-85. [2] 杨小平, 郭元庆, 樊松林, 等. 高密度低腐蚀无固相压井液研究与应用[J].钻井液与完井液, 2010, 27(5):51-54.YANG Xiaoping, GUO Yuanqing, FAN Songlin, et al. Study and application on high weight low corrosion and clay-free killing fluid[J].Drilling Fluid & Completion Fluid, 2010, 27(5):51-54. [3] 李萌. 耐高温气井低伤害压井液体系研究[D]. 东北石油大学, 2013, 硕士研究生论文. LI Meng. Research on low damage contol fluid resisting high temperature of gas well[D]. Northeast Petroleum University, 2013, Thesis for the Master Degree in Engineering. [4] 陈叙生, 王勇, 冯彬. 适用于气藏的高温高密度低伤害无固相压井液的研究[J]. 石油天然气学报, 2014, 39(7):103-106.CHEN Xusheng,WANG Yong,FENG Bin.Research on high temperature and solid-free high density killing fluid system with low damage for gas reservoirs[J].Journal of Oil and Gas Technology,2014,39(7):103-106. [5] 王诗征. 大庆徐深气田保护储层压井液体系的研究[D]. 东北石油大学,2013,硕士研究生论文. WANG Shizheng,Research of Reservoir Protection Well Killing System in Daqing Xun Shen Gas Field[D]. Northeast Petroleum University,2013,Thesis for the Master Degree in Engineering. [6] 郑新权,汪海阁. 中国石油钻井技术现状及需求[J]. 石油钻采工艺,2003,25(2):1-4.ZHENGXinquan,WANG Haige.Present state and demand of petroleum china drilling technology[J].Oil Drilling & Production Technology,2003,25(2):1-4. [7] 万绪新,刘绍元,王树强. 耐温耐盐深井钻井液技术[J]. 钻井液与完井液,2002,19(6):59-61.WAN Xuxin,LIU Shaoyuan,WANG Shuqiang, Temperature tolerant and salt resistant drilling fluid for deep hole drilling[J].Drilling Fluid & Completion Fluid, 2002,19(6):59-61. [8] 王亮,杨旭,吴小玲. 新型压井液体系的研究及性能评价[J]. 钻井液与完井液,2004,21(2):35-38.WANG Liang,YANG Xu,WU Xiaoling. Study and evaluation of a novel kil ling fluid[J].Drilling Fluid & Completion Fluid,2004,21(2):35-38. [9] 李貌. 低损害高密度无固相压井液技术研究[D]. 成都:西南石油大学,2015,硕士研究生学位论文:30-32. LI Mao. Research on low damage high-density solid free completion fluid technology[D].Chengdu:2015,Master's Thesis.30-32. -

计量
- 文章访问数: 732
- HTML全文浏览量: 211
- PDF下载量: 143
- 被引次数: 0