压差激活密封剂的制备、密封性能及机理研究

幸雪松; 许林; 冯桓榰; 刘书杰; 许明标; 陈侃

doi:10.3969/j.issn.1001-5620.2019.06.023

压差激活密封剂的制备、密封性能及机理研究

doi: 10.3969/j.issn.1001-5620.2019.06.023

1. 中海石油(中国)有限公司北京研究中心, 北京 100028;
2. 浙江海洋大学石化与能源学院, 浙江舟山 316022;
3. 长江大学石油工程学院, 武汉 430100;
4. 荆州嘉华科技有限公司, 湖北荆州 433100

基金项目:

“中海油井完整性技术体系研究（二期）—海上气井完整性检测与封堵技术研究”（YXKY-2017-ZY-09）；浙江省教育厅一般科研项目“新型压差激活密封剂的微缺陷自适应修复行为研究”（Y201840431）；舟山市科技计划项目“海洋油气井密封损伤的压力控释靶向修复技术研发”（2019C21006）

详细信息

作者简介:
幸雪松,高级工程师,现在主要从事钻完井设计及管理工作。E-mail:xingxs@cnooc.com.cn

通讯作者:
许林,博士,现从事油田化学、计算化学等领域研究。E-mail:xuhu_11@yeah.net

中图分类号: TE257.6
计量
- 文章访问数: 669
- HTML全文浏览量: 220
- PDF下载量: 200
- 被引次数: 0
出版历程
- 收稿日期: 2019-09-08
- 刊出日期: 2019-12-30

A Differential Pressure Activated Sealant: Preparation, Sealing Performance and Working Mechanisms

1. Beijing Research Center of CNOOC (China) Co., Ltd, Beijing 100028;
2. College of Petrochemical and Energetic Engineering, Zhejiang Ocean University, Zhoushan, Zhejiang 316022;
3. Hubei Collaborative Innovation Center for Unconventional Oil and Gas, Yangtze University, Wuhan, Hubei 430100;
4. Jingzhou Jiahua Tech. Ltd., Jingzhou, Hubei 434000

摘要

摘要: 压差激活密封剂是一种具有自适应密封、施工简单、费用低等特点的新型密封体系，对于油气井管柱完整性的快速修复具有重要意义。笔者以羧基丁腈胶乳（XNBRL）、MgCl₂、OP-10、VIS-B为原料，设计四因素四水平正交实验，考察了胶乳浓度、激活剂浓度、剪切速率、停搅时间对压差激活剂固相颗粒生长及微结构的影响，评价了压差激活剂的动态密封性能，分析了压差激活密封机理。结果表明，压差激活密封剂固相颗粒形貌规则，具有层级体型结构，粒径小于400 μm ；粒径生长影响顺序为：停搅时间>胶乳浓度>激活剂浓度>剪切速率；制备密封剂可在50℃、7.5 MPa压差下对0.5 mm×0.8 mm×10 mm微缺陷成功实施封堵；根据微粒形貌、分子聚集态结构及其射流场剪切形变行为，提出了密封流体在微缺陷压差作用下的液固转化力学-化学耦合构效模型，初步揭示了压差激活密封剂的自适应修复机理。
- 压差激活密封剂 /
- 正交实验 /
- 微观分析 /
- 动态密封测试 /
- 自适应修复
Abstract: Differential pressure activated sealant is a kind of sealant with self-adaptive sealing capacity. The application of this sealant is both easy and cost effective. It can be used to fast repair the integrity of oil and gas well strings. Four-factor four-level orthogonal experiment has been performed in laboratory with raw materials such as carboxylated butadiene-acrylonitrile latex (XNBRL), MgCl₂, OP-10, VIS-B, to study the effects of the concentration of the latex, concentration of the activator, agitating time and rest time on the growth of the differential pressure activator particles and the microstructure of the activator. The dynamic sealing performance of the activator was evaluated and the differential pressure activated sealing mechanisms were analyzed. It was found that the morphology of the differential pressure activated sealant particles is regular, having a tiered spatial structure. The particle size of the sealant is less than 400 μm. Factors affecting the growth of the particles are in the following order:rest time > concentration of the latex > concentration of the activator > shearing rate. The sealant prepared can successfully seal a microfracture of 0.5 mm×0.8 mm×10 mm at 50℃ and 7.5 MPa. Based on the morphology of the particles, the molecular aggregation structure and the shear deformation behavior of the aggregated molecules, a physical-chemical coupling structure-activity model has been presented to describe the liquid-solid conversion behavior of sealing fluids under the differential pressure from microfractures. The model preliminarily reveals the selfadaptive reparation mechanisms of the differential pressure activated sealants.
- Differential pressure activated sealant /
- Orthogonal experiment /
- Microanalysis /
- Dynamic sealing test /
- Self-adaptive reparation

HTML全文

参考文献(19)

[1]	MENDOZA M A,HERNANDEZ J,RUSCH D W.Leak-sealant in hydraulic systems minimizes maintenance costs in offshore wells[C].SPE 59026,2000.
[2]	CHIVVIS R W,JULIAN J Y,CARY D N.Pressure activated sealant economically repairs casing leaks on prudhoe bay wells[C]. SPE 120978,2009.
[3]	SINGH A K,PATIL B,KISHORE K,et al.Casing leak investigation & successful repair by application of pressure activated liquid sealant in a newly completed well in offshore environment-a case study[C].SPE 173826,2015.
[4]	RUSCH D W.Internal repair of pipeline leaks using pressure-activated sealant[C].SPE 91400,2004.
[5]	RUSCH D W,SABINS F,ASLAKSON J.Microannulus leaks repaired with pressure-activated sealant[C].SPE 91399,2004.
[6]	AL-DOSSARY A F,AL-WARTHAN A,ALBADRAN M,et al.The ideal approach for casing leak repairs in old wells[C]. SPE188478,2017.
[7]	CARY D N,GROOMER V.Drilling riser alternative repair methods for leaking joint seals utilizing pressure activated sealant technology[C].SPE101216,2006.
[8]	JOHNS J E,CARY D N,ELLICS B C,et al. Locating and repairing casing leaks with tubing in place-ultrasonic logging and pressure-activated sealant methods[C].SPE 108195,2007.
[9]	RUSCH D W,ELLIS B C.Use of pressure activated sealants to cure sources of casing pressure[C].SPE Conference Paper,SPE 55996,1999.
[10]	JULIAN J Y,JACKSON J C,CARY D N.Pressure activated sealants-non-rig solutions in mature fields in alaska[C]. SPE163944,2013.
[11]	郭丽梅,肖淼,刘举祥. 压差激活密封剂[J]. 钻井液与完井液,2015,32(1):65-68. GUO Limei,XIAO Miao,LIU Juxiang.Pressure activated sealant[J].Drilling Fluid & Completion Fluid, 2015,32(1):65-68.
[12]	顾强,张恺,胡春玲,等. 核壳乳液在电解质作用下的破乳过程[J]. 应用化学,2006,23(2):122-125. GU Qiang,ZHANG Kai,HU Chunling,et al.The breaking process of core-shell emulsion affected by electrolytes[J].Chinese Journal of Applied Chemsitry, 2006,23(2):122-125.
[13]	吕开河,邱正松,魏慧明,等. 自适应防漏堵漏钻井液技术研究[J]. 石油学报,2008,29(5):757-765. LYU Kaihe,QIU Zhengsong,WEI Huiming,et al. Study on techniques of auto-adapting lost circulation resistance and control for drilling fluid[J].Acta Petrolei Sinica,2008,29(5):757-765.
[14]	O'REILLY R K,HAWKER C J,WOOLEY K L.Cross-linked block copolymer micelles:functional nanostructures of great potential and versatility[J].Chem Soc Rev,2006,35:1068-1083.
[15]	刘向东,陈永平,张程宾,等. 双乳液液滴形变及破碎特性[J]. 工程热物理学报,2012,33(3):457-459. LIU Xiangdong,CHEN Yongping,ZHANG Chengbiu, et al. Deformation and breakup characterisitics of double emulsion drop[J]. Journal of Engineering Thermophysics, 2012,33(3):457-459.
[16]	刘冬薇,宁智,吕明,等. 液滴撞击超疏水壁面反弹及破碎行为研究[J]. 计算力学学报,2016,33(1):107-113. LIU Dongwei,NING Zhi,LYU Ming,et al.Study on the rebound and breakup of the droplet after impacting on the super-hydrophobic wall[J].Chinese Journal of Computational Mechanics,2016,33(1):107-113.
[17]	张红光,董守平,姜雪梅. 剪切流场中液滴形变模型的理论研究[J]. 科学技术与工程,2006,6(19):3028-3031. ZHANG Hongguang,DONG Shouping,JIANG Xuemei.Theory study on model of deformation of a liquid in a shear flow[J].Science Technology and Engineering, 2006(19):3028-3031.
[18]	LUO Z,HE L, BAI B.Deformation of spherical compound capsules in simple shear flow[J].Journal of Fluid Mechanics,2015, 775:77-104.
[19]	廖斌,张桂夫,王鲁海,等.冲击作用下液滴在环境液体中的变形破碎行为[J]. 实验流体力学,2016,30(5):9-16. LIAO Bin,ZHANG Guifu,WANG Luhai,et al. Deformation and breakup behaviors of a drop in ambient liquid under impact[J].Journal of Experiments in Fluid Mechanics,2016,30(5):9-16.