油基钻屑热解析油的异味去除实验研究

李建林; 王昌军; 郑延成

doi:10.3969/j.issn.1001-5620.2019.06.012

油基钻屑热解析油的异味去除实验研究

doi: 10.3969/j.issn.1001-5620.2019.06.012

长江大学化学与环境工程学院, 湖北荆州 434023

详细信息

作者简介:
李建林,在读硕士研究生,1994年生,研究方向为油气田应用化学。电话15670860119;E-mail:jlli1022@126.com

通讯作者:
王昌军,教授,硕士生导师,1963年生。电话13908611016

中图分类号: TE92
计量
- 文章访问数: 577
- HTML全文浏览量: 190
- PDF下载量: 157
- 被引次数: 0
出版历程
- 收稿日期: 2019-09-23
- 刊出日期: 2019-12-30

Study on Deodorizing Thermally Desorbed Oil from Oil Cuttings

Yangtze University College of Chemistry & Environmental Engineering, Jingzhou, Hubei 434023

摘要

摘要: 油基钻井液产生的含油钻屑大多采用热解析的方法净化处理，但这种高温热解析回收的残余油存在难闻的异味，严重影响了热解析油在油基钻井液中的回收利用效果。通常情况下，物质产生异味的主要原因是其中含有易挥发的异味组分。采用蒸馏方法测定了现场柴油基钻屑热解析油中的低沸点馏分含量，研究了酸解方法、吸附-离心方法以及蒸馏方法对热解析油的异味去除效果，同时，采用气-质联用仪测定了热解析油处理后的组分，分析了热解析油产生异味的原因。结果表明：热解析油中低于150℃的馏分含量为2.5%，这些轻质组分是其产生异味的主要原因。该热解析油经酸解或吸附-离心后，仍然存在一定量的低沸点烯烃等成分，不能去除异味。蒸馏方法能有效去除热解析油中的低沸点馏分，将收集的高沸点馏分油回收用于油基钻井液，异味去除效果明显，现场可操作性强。
- 油基钻井液 /
- 热解析油 /
- 异味去除 /
- 组分测定 /
- 回收利用
Abstract: Oil cuttings produced in drilling with oil base drilling fluids are generally cleaned by thermal desorption method which, when heating the cuttings at high temperatures, produces bad smelled oils, seriously affecting the recycling and reusing of the oils obtained from the cuttings. Generally speaking, the bad odor comes from the volatile components with bad odor in the oils. Using oil distillation, the low-boiling-point components of the oils desorbed from drilled cuttings (obtained from field diesel oil base mud) were obtained and were deodorized with various methods, such as acidolysis, adsorption-centrifuging and distillation. The components of the oils desorbed from drilled cuttings were ascertained with GLC-MS and the bad odor from the thermally desorbed oils was analyzed. It was found that the content of the fraction in the thermally desorbed oils with boiling point less than 150℃ was 2.5%, and it is this light fraction who produces the bad odor. By acidolyzing or adsorption-centrifuging, the thermally desorbed oils still contain some low boiling point olefins, making the bad odor very difficult to remove. Distillation can effectively remove the low boiling point components from the thermally desorbed oils. The high boiling point components can be reused to mix oil base mud. This method is effective and efficient and is easy to perform in field application.
- Oil base drilling fluid /
- Thermally desorbed oil /
- Deodorize /
- Component determination /
- Recycle

HTML全文

参考文献(6)

[1]	鄢捷年. 钻井液工艺学[M]. 第二版. 东营:中国石油大学出版社,2012:234-244. YAN Jienian. Drilling Fluid Technology[M].Second Edition.Dongying:China University of Petroleum Press, 2012:234 -244.
[2]	孙静文,许毓,刘晓辉,等. 油基钻屑处理及资源回收技术进展[J]. 石油石化节能,2016,6(1):30-33. SUN Jingwen,XU Yu,LIU Xiaohui, et al. Progress of oil-based mud treatment and resource recovery technology[J].Energy Conservation in Petroleum & Petrochemical Industry, 2016,6(1):30-33.
[3]	张媛媛,祝威,王利君. 油气田企业固体废物处理处置及资源化技术展望[J]. 油气田环境保护,2018,28(1):1-3 ,9. ZHANG Yuanyuan, ZHU Wei,WANG Li jun. Prospect of oily solid waste treatment and resource utilization technology in oil and gas field enterprises[J]. Environmental Protection of Oil & Gas Field, 2018,28(1):1-3,9.
[4]	GB/T 6536-2010石油产品常压蒸馏特性测定法[S]. GB/T 6536-2010 Standard test method for distillation of petroleum products at atmospheric pressure[S].
[5]	杨金鑫,熊道陵,王庚亮,等. 分光光度法应用于石油产品色度测定的优化研究[J]. 江西理工大学学报, 2014,35(5):6-11. YANG Jinxin, XIONG Daoling,WANG Gengliang, et al. The optimization research of petroleum products chroma by spectrophotometry[J]. Journal of Jiangxi University of Science and Technology,2014,35(5):6-11.
[6]	GB/T 8929-2006原油水含量的测定蒸馏法[S]. GB/T 8929-2006 Crude petroleum-determination of water-distillation method[S].