Calculation of Harmful Low Density Solids Content in Oil Base Drilling Fluids Using Linear Regression Method
-
摘要: 随着页岩气大规模开发,高密度油基钻井液应用越来越广泛。在钻井过程中,小颗粒钻屑将不断进入油基钻井液中,极大地影响了钻井液的性能,目前的研究缺乏计算油基钻井液中钻屑含量的方法。在GB/T 16783.2《石油天然气工业钻井液现场测试第2部分:油基钻井液》中只规定了低密度固相含量的计算方法,并未对有用低密度固相和有害低密度固相进行有效区分。通过对比井浆和室内新配浆的固相含量,利用线性回归得出了一种有害低密度固相含量计算方法,并以现场钻井液为例进行校核,通过线性回归的方法,计算得到的固相含量与实测固相含量相差较小,误差小于3%,可以更精确地计算出有害固相含量,给油基钻井液的性能维护提供了重要的标准。该方法计算简便、误差小,具有较高的现场应用价值。Abstract: With the large scale development of shale gas, high density oil base drilling fluids are finding wide application in shale gas drilling. During drilling, small particles are continuously entering into the drilling fluid, greatly affecting the performance of the drilling fluid. Presently there is no method for calculating the drilled cutting content of oil base drilling fluids. The standard GB/T 16783.2 only gives a method of calculating the content of low density solids, which is unable to differentiate the wanted low density solids and the unwanted harmful low density solids. By comparing the solids contents of drilling fluid taken from a well and the mud freshly made in laboratory, a method for calculating the content of harmful low density solids was developed through linear regression. This method was also checked for its accuracy using muds taken from fields. Errors between the solids content obtained from linear regression and the solids content actually measured were less than 3%, indicating that this method can be used to accurately calculate the content of harmful solids. This simple method has provided an important standard on which the properties of oil base drilling fluids can be maintained. Small calculation errors make the method valuable and feasible to field application.
-
Key words:
- Solids content /
- Linear regression /
- Oil base drilling fluid /
- harmful solids
-
[1] 芦志坚. 钻井液性能评价[J]. 辽宁化工, 2015(9):1135-1136. LU Zhijian. Evaluation of drilling fluid performance[J]. Liaoning Chemical Industry, 2015(9):1135-1136. [2] 董悦, 盖姗姗, 李天太,等. 固相含量和密度对高密度钻井液流变性影响的实验研究[J]. 石油钻采工艺, 2008, 30(4):36-40.DONG Yue, GE Shanshan, LI Tiantai, et al. Experimental study on the effect of solid content and density of high density drilling fluid on its rheological properties[J]. Oil Drilling & Production Technology, 2008, 30(4):36-40. [3] 李公让, 赵怀珍, 薛玉志,等. 超高密度高温钻井液流变性影响因素研究[J]. 钻井液与完井液, 2009, 26(1):12-14.LI Gongrang, ZHAO Huaizhen, XUE Yuzhi, et al. Study on factors affecting rheology of ultra high density high temperature drilling fluid[J]. Drilling Fluid & Completion Fluid, 2009, 26(1):12-14. [4] NICORA L F, PIROVANO P, BLOMBERG N, et al. SPE International symposium on oilfield chemistry-high-density invert-emulsion system with very low solids content to drill ERD and HPHT well[C].SPE 56871 PA.Society of Petroleum Engineers SPE International Symposium on Oilfield Chemistry-Houston, Texas, 2001-02-13. [5] DAVISON J M, DACCORD G, PROUVOST L P, et al. Rig-site monitoring of the drilling fluid solids content and solids-control equipment discharge[J]. SPE Drilling & Completion,1999,6. [6] 张小平, 王京光, 杨斌,等. 低切力高密度无土相油基钻井液的研制[J]. 天然气工业, 2014, 34(9):89-92.ZHANG Xiaoping, WANG Jingguang, YANG Bin, et al. Development of a clay free oil-based drilling fluid with a low shearing force and high density[J]. Natural Gas Industry, 2014, 34(9):89-92. [7] 陈光星, 冯炼, 赵薇. 浅谈钻井液固相含量测定方法的改进[J]. 吐哈油气, 2011(3):247-249. CHEN Guangxing, FENG Lian, ZHAO Wei. Discussion on improvement of measuring methods of solids content of drilling fluid[J]. Tuha Oil & Gas, 2011(3):247-249. [8] GA/T 1355-2018, 国家标准GB/T 28181-2016符合性测试规范[S]. GA/T 1355-2018, Specifications for compliance tests with national standard GB/T 28181-2016[S]. [9] 蔡利山. 固相含量测定结果的分析与讨论[J]. 西部探矿工程, 2001, 13(2):50-51.CAI Lishan. Analysis and discussion of solid phase content determination results[J]. West China Exploration Engineering, 2001, 13(2):50-51.
点击查看大图
计量
- 文章访问数: 507
- HTML全文浏览量: 137
- PDF下载量: 230
- 被引次数: 0