可在线施工的反相微乳液聚合物压裂液

何大鹏; 刘通义; 郭庆; 林波; 孙长春

doi:10.3969/j.issn.1001-5620.2018.05.020

可在线施工的反相微乳液聚合物压裂液

doi: 10.3969/j.issn.1001-5620.2018.05.020

1. 延长油田股份有限公司勘探开发技术研究中心, 陕西延安 716000;
2. 西南石油大学, 成都 610500;
3. 陕西延长石油(集团)有限责任公司研究院, 西安 710075;
4. 成都佰椿石油科技有限公司, 成都 610000;
5. 渤海钻探工程有限公司管具技术服务分公司, 河北任丘 062552

基金项目:

国家973计划项目“页岩气储层超临界二氧化碳压裂及增渗机理”（2014CB239203）。

详细信息

作者简介:
何大鹏,工程师,1983年生,毕业于西南石油大学石油与天然气地质勘查专业,现从事石油勘探开发技术研究工作。E-mail:409818173@qq.com。

中图分类号: TE357.12
计量
- 文章访问数: 669
- HTML全文浏览量: 190
- PDF下载量: 187
- 被引次数: 0
出版历程
- 收稿日期: 2018-07-11
- 刊出日期: 2018-09-30

An Online Operable Fracturing Fluid Treated with Reverse Microemulsion Polymer

1. Research Center of Exploration and Development of Yanchang Oilfeld Co., Ltd., Yan'an, Shaanxi 716000;
2. Southwest University of Petroleum, Chengdu, Sichuan 610500;
3. Research Institute of Yanchang Petroleum Group Ltd., Xi'an, Shaanxi 710075;
4. Chengdu BaiChun Petroleum Technology co., Ltd., Chengdu, Sichuan 610000;
5. Tubing Service Company, BHDC, Renqiu, Hebei 062552

摘要

摘要: 为了使微乳液/反相微乳液聚合物能够配制用于加砂压裂的凝胶压裂液，以丙烯酸、丙烯酰胺、强亲水单体、2-丙烯酰胺基-2-甲基丙磺酸、甲基丙烯酸甲酯、乙烯基磺酸钠等为主要聚合单体，以复合脂肪醇聚氧乙烯醚和环己烷为连续相，反应制备了反相微乳液聚合物——速溶乳液稠化剂BCG-2，其可采用清水和高矿化度盐水配液，配套研发了延缓型弱交联剂，优选了功能助剂，形成了滑溜水压裂液和弱凝胶压裂液配方。利用连续油管测试，该滑溜水压裂液在600 L/min排量下降阻率可达70.9%，并随排量的增大而增大；弱凝胶压裂液受高剪切速率的影响小，并且在150℃、170 s^-1下剪切120 min后黏度保持在80 mPa·s以上；压裂液彻底破胶后呈半透明，无沉淀，表面张力为23.87 mN/m，并且几乎无残渣（3 mg/L以下）；破胶液与延长油田某井原油在4 h内破乳率可达100%。在延长油田某井利用地层返排液在线配制120℃的弱凝胶压裂液并进行了实验性压裂施工，解决了现场压裂存在的诸多难题，对促进压裂改造向简单、高效、重复利用等方向发展具有重大意义。
- 反相微乳液 /
- 弱交联 /
- 速溶 /
- 在线施工 /
- 返排液利用
Abstract: To use microemulsion/reverse microemulsion polymers in preparing gel fracturing fluids with sands, an instant emulsion thickening agent BCG-2 has been developed through reverse microemulsion polymerization, with acrylic acid, acrylamide, strong hydrophilic monomers, 2-acrylamido-2-methylpropane sulfonic acid (AMPS), methyl methacrylate, ethylene, sodium salt of vinyl sulfonate etc. as the monomers, and aliphatic alcohol polyethoxylate and cyclohexane compound as the external phase. BCG-2 is soluble in both fresh water and high salinity saltwater. A slick water fracturing fluid and a weak gel fracturing fluid were formulated with a retarded weak crosslinking agent and selected functional agents. In well testing with coiled tubing, the rate of friction reduction of the slick water at a flowrate of 600 L/min was 70.9%, and was increasing with the increase of the flowrate. The weak gel fracturing fluid, after shearing for 120 min at 150℃ and 170 s^-1, still had viscosity of at least 80 mPa·s, indicating that the weak gel fracturing fluid is less affected by high shearing rate. The fracturing fluids, after thorough gel breaking, become semitransparent and have no precipitate and almost no residue (< 3 mg/L). The surface tension of the gel-breaking fracturing fluids is 23.87 mN/m. The mixture of the gel-breaking fracturing fluids and a crude oil sample from a well in Yanchang oilfeld can be completely demulsifed in 4 hours. In a feld experiment, a well in Yanchang oilfeld was fractured with an online prepared fracturing fluid of 120℃. The experimental operation has solved many problems encountered in feld fracturing operations in the past, and is of signifcance in promoting fracturing operations toward the direction of simplicity, high effciency and recyclability.
- Reverse microemulsion /
- Weak crosslinking /
- Instant /
- Online operation /
- Reuse of flowback fluid

HTML全文

参考文献(16)

[1]	罗攀登, 张俊江, 鄢宇杰, 等. 耐高温低浓度瓜胶压裂液研究与应用[J]. 钻井液与完井液, 2015, 32(5):86-88. LUO Pandeng, ZHANG Junjiang, YAN Yujie, et al. Study and application of high temperature low concentration guar gum fracturing fluid[J].Drilling Fluid & Completion Fluid, 2015, 32(5):86-88.
[2]	明华, 舒玉华, 卢拥军, 等. 一种速溶无残渣纤维素压裂液[J]. 油田化学, 2014, 31(4):492-496. MING Hua, SHU Yuhua, LU Yongjun, et al.A cellulose fracturing fluid with instant solution and nonresidue[J].Oilfield Chemistry, 2014, 31(4):492-496.
[3]	崔会杰, 李建平, 王立中. 清洁压裂液室内研究[J]. 钻井液与完井液, 2005, 22(3):41-43. CUI Huijie, LI Jianping, WANG Lizhong.Laboratory research on clean fracturing fluid[J].Drilling Fluid &Completion Fluid, 2005, 22(3):41-43.
[4]	张林. 聚合物压裂液的合成及压裂关键技术研究[D]. 陕西科技大学, 2014. ZHANG Lin.Study on the synthesis of polymer fracturing fluids and the key technology of fracturing[D].Shaanxi University of Science & Technology, 2014.
[5]	林波, 刘通义, 赵众从, 等. 抗高温无残渣压裂液的研究与应用[J]. 钻井液与完井液, 2012, 29(5):70-73. LIN Bo, LIU TongYi, ZHAO Zhongcong, et al.Research and application of high temperature clear fracturing fluid system[J].Drilling Fluid & Completion Fluid, 2012, 29(5):70-73.
[6]	王建莉, 王金良, 周晓楠, 等. 乳液聚合在油田开发应用中的研究进展[J]. 石油化工, 2013, 42(2):243-247. WANG Jianli, WANG Jinliang, ZHOU Xiaonan, et al. Progresses in research of emulsion polymerization for oilfield exploitation[J].Petrochemical Technology, 2013, 42(2):243-245.
[7]	王磊, 张建强, 李瑞冬, 等. 丙烯酰胺类反相微乳液聚合研究及应用进展[J]. 油田化学, 2009, 26(4):458-463. Wang Lei, ZHANG Jianqiang, LI Ruidong et al. Advances in hydrogel microspheres of acrylamide copolymersmade via inverse microemulsion polymerization[J].Oilfield Chemistry, 2009, 26(4):458-463.
[8]	刘通义, 向静, 赵众从, 等. 滑溜水压裂液中减阻剂的制备及特性研究[J]. 应用化工, 2013, 42(3):484-487. LIU TongYi, XIANG jing, ZHAO Zhongcong, et al. Preparation of resistance reducing agent in slick-water fracturing and characteristic research[J].Applied Chemical Industry, 2013, 42(3):484-487.
[9]	马玄, 岳前升, 吴洪特, 等. 国内外水力压裂减阻剂研究进展及展望[J]. 中外能源, 2014, 19(12):32-36. MA Xuan, YUE Qiansheng, WU Hongte, et al. Research progress and prospect of friction reducer for hydraulic fracturing at home and abroad[J].Sino-Global Energy, 2014, 19(12):32-36.
[10]	顾行彦, 冯玉军, 吕永利, 等. 一种功能复合型乳液态聚合物压裂液及其制备方法:CN, 105238381A[P].2016-01-13. GU Xingyan, FENG Yujun, LIU Yongli et al.A functional composite-type emulsion-state polymer fracturing fluid and a preparation method thereof:CN, 105238381A[P].2016-01-13.
[11]	林波, 刘通义, 陈光杰. 一种海水基清洁压裂液体系研究[J]. 油田化学, 2015, 32(3):336-340. LIN Bo, LIU Tongyi, CHEN Guangjie.The formulation and properties of on a seawater-based clean fracturing fluid[J].Oilfield Chemistry, 2015, 32(3):336-340.
[12]	刘通义, 谭坤, 陈光杰. 交联压裂液抗剪切性能评价方法探讨[C]//全国流变学学术会议.2002:409-413. LIU Tongyi, TAN Kun, CHEN Guangjie. Discuss for evaluate method of fracturing fluid shear property[C]//National Academic Conference on Rheology.2002:409 -413.
[13]	罗庆梅, 郭敏, 白玉军, 等.HPAM/有机锆交联体系压裂液的研究[J]. 陕西科技大学学报, 2015(1):117-121. LUO Qingmei, GUO Min, BAI Yujun, et al.Study on HPAM/Zirconium-organic cross-linking system for fracturing fluid[J].Journal of Shaanxi University of Science, 2015 (1):117-121.
[14]	张红, 李国锋, 刘洪升, 等. 表面活性剂在水基压裂液中的应用[J]. 钻井液与完井液, 2003, 20(1):24-26. ZHANG Hong, LI Guofeng, LIU Hongsheng, et al. Application of surfactant in water base fracturing fluid[J]. Drilling Fluid & Completion Fluid, 2003, 20(1):24-26.
[15]	张佳华. 压裂助剂对乳状液稳定性影响及压裂乳状液破乳研究[D]. 天津工业大学, 2014. ZHANG Jiahua.Research on influence of emulsion stability by fracturing assistants and demulsification of fracturing emulsion[D].Tianjin Polytechnic University, 2014.
[16]	王忠民. 破乳剂在处理油田压裂液中的研究应用[J]. 当代化工, 2011, 40(2):136-138. WANG Zhongmin.Research and application of a new demulsifier in treatment of fracturing fluid[J]. Contemporary Chemical Industry, 2011, 40(2):136-138.