Risk Evaluation of Cementing Job Quality of Wells Drilled in Kuche Piedmont Structure
-
摘要: 塔里木山前构造油气资源丰富,但其气藏埋深在7 000 m左右,应用油基钻井液可有效地解决盐膏岩、泥页岩层段钻进过程中井下复杂问题,但在此环境下油基钻井液影响了水泥石与井壁/套管的胶结能力。为此,以已施工井的相关数据为参考依据,分别从液固界面润湿反转能力、防漏条件下提高顶替效率的施工排量、固井井筒浆体性能匹配以及套管扶正器安放情况为研究对象,系统分析影响固井质量的主要因素。研究结果表明,在用隔离液中表面活性剂/水大于30%可实现胶结界面处于亲水状态、在未发生漏失条件下排量达到塞流流量以上均有助于提高顶替效率,每2个套管安放一个扶正器能确保套管居中度大于67%;综合分析表明,影响部分井固井质量不理想的主要原因是套管居中度差与部分井段井筒内的浆体匹配性差。基于本论文理论与现场相结合的针对性研究,为提高区域固井质量提供了切实可行的方法与依据。Abstract: The Kuche piedmont structure in Tarim Basin is abundant in oil and gas which, unfortunately, are buried at depth of about 7 000 m. Oil base muds can be used to overcome the drilling challenges such as salt and gypsum contamination, borehole instability through mudstone and shale formations. On the other hand, oil base muds negatively affect the bonding between set cement and borehole wall, and the bonding between set cement and casing string. To minimize these negative effects, researches were conducted based on the data from drilled wells to systematically analyze the main factors affecting well cementing job quality from several aspects, i.e., wettability reversion on liquid-solid interface, flow rate to increase displacement efficiency while avoiding lost circulation, compatibility between drilling fluid in hole and cement slurry, as well as the placement of centralizers along casing string. The research work showed that percentage of surfactants/water in spacer fluid above 30% makes the interfaces (cement sheath-casing string and cement sheathborehole wall) water wet. Flow rates enough to realize plug flow while lost circulation is avoided help increase displacement efficiency. One centralize every two singles of casing ensures that casing centricity is greater than 67%. It can be concluded that poor cementing job quality in some wells is resulted from poor casing centricity and poor compatibility of cement slurry with drilling fluid in hole. This study provides a feasible and reliable method and basis for the enhancement of well cementing job quality in the piedmont structure.
-
[1] 李健,李早元,辜涛,等.塔里木山前构造高密度油基钻井液固井技术[J]. 钻井液与完井液,2014,31(2):51-54.LI Jian,LI Zaoyuan,GU Tao,et al.Cementing technology for wells drilled with high density oil-base drilling fluid in piedmont structure of tarim basin[J]. Drilling Fluid & Completion Fluid,2014,31(2):51-54. [2] 齐静,李宝贵,张新文,等. 适用于油基钻井液的高效前置液的研究与应用[J]. 钻井液与完井液,2008, 25(3):49-51.QI Jing,LI Baogui,ZHANG Xinwen,et al.The study and application of a high performance pad fluid suitable for use in oil base drilling fluids[J].Drilling Fluid & Completion Fluid,2008,25(3):49-51. [3] 童杰,李明,魏周胜,等. 油基钻井液钻井的固井技术难点与对策分析[J]. 钻采工艺,2014,37(6):17-20.TONG Jie,LI Ming,WEI Zhousheng,et al.Difficulties and countermeasures of cementing technology in oilbase drilling fluid drilling[J].Drilling & Production Technology,2014,37(6):17-20. [4] 王翀,谢飞燕,刘爱萍. 固井前置液室内评价方法探讨[J]. 钻井液与完井液,2014,31(4):92-94.WANG Chong,XIE Feiyan,LIU Aiping.Discussion on the evaluation of preflush fluid for well cementing[J]. Drilling Fluid & Completion Fluid,2014,31(4):92-94. [5] 石林,蒋宏伟,郭庆丰. 易漏地层的漏失压力分析[J]. 石油钻采工艺,2010,32(3):40-44.SHI Lin,JIANG Hongwei,GUO Qingfeng.Analysis on the leakage pressure of thief formation[J].Oil Drilling & Production Technology,2010,32(3):40-44. [6] AADNOY B S,BELAYNEH M,ARRIADO M,et al. Design of well barriers to combat circulation losses[C]. SPE 105449,2007. [7] 李大奇,康毅力,刘修善,等. 基于漏失机理的碳酸盐岩地层漏失压力模型[J]. 石油学报,2011,32(5):900-904.LI Daqi,KANG Yili, LIU Xiushan,et al.The lost circulation pressure of carbonate formations on the basis of leakage mechanisms[J].Acta Petrolei Sinica,2011, 32(5):900-904. [8] 李大奇. 裂缝性地层钻井液漏失动力学研究[D]. 西南石油大学,2012. LI Daqi.Numerical and experimental investigations on drilling fluid losses in fractured formations[D].Southwest Petroleum University,2012. [9] 王涛. 注水泥环空动态顶替界面数值模拟[D]. 西南石油大学,2013. WANG Tao.Numerical simulation on dynamic displacement interface in the process of cementing in annulus[D].Southwest Petroleum University,2013. [10] 中华人民共和国石油天然气行业标准.SY/T 5334-1996套管扶正器安放间距计算方法[S]. 北京:中国石油天然气总公司,1996. THE OIL AND GAS INDUSTRY STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA.SY/T 5334-1996 calculation method of the spaced interspacing for the casing centralizer[S].Beijing:China National Petroleum Corporation,1996. [11] 邓建民,王永洪,贾晓斌,等. 注水泥流体密度与流变参数匹配的计算方法[J]. 石油钻探技术,2011,39(5):45-48.DENG Jianmin,WANG Yonghong,JIA Xiaobin,et al. The method to calculate cementing fluids' density and rheological parameters[J].Petroleum Drilling Techniques, 2011,39(5):45-48. [12] 刘崇建,黄柏宗,徐同台,等. 油气井注水泥理论与应用[M]. 北京:石油工业出版社,2001:81-84. LIU Chongjian,HUANG Baizong,XU Tongtai,et al. Theory and application in oil and gas well cementing[M], Beijing:Petroleum Industry Press,2011:81-84.
点击查看大图
计量
- 文章访问数: 560
- HTML全文浏览量: 191
- PDF下载量: 154
- 被引次数: 0