热解油基钻屑资源化利用(I):废渣基固化剂固化实验研究

蔡浩; 姚晓; 肖伟; 董伟; 华苏东; 谷重

doi:10.3969/j.issn.1001-5620.2017.04.011

热解油基钻屑资源化利用(I):废渣基固化剂固化实验研究

doi: 10.3969/j.issn.1001-5620.2017.04.011

蔡浩¹,
姚晓^1,2, ,,
肖伟¹,
董伟³,
华苏东¹,
谷重¹

1. 南京工业大学材料科学与工程学院, 南京 210009;
2. 江苏先进生物与化学制造协同创新中心, 南京 210009;
3. 中石油长城钻探工程有限公司钻井液公司, 辽宁盘锦 124010

基金项目:

江苏高校优势学科建设工程项目（PAPD）；江苏高校品牌专业建设工程资助项目（PPZY2015B128）。

详细信息

作者简介:
蔡浩,在读硕士研究生,研究方向为油气田固体废弃物无害化处理。电话18260021216;E-mail:1130080473@qq.com。

通讯作者:
姚晓,E-mail:yaoxiao@njtech.edu.cn。

中图分类号: TE92
计量
- 文章访问数: 558
- HTML全文浏览量: 140
- PDF下载量: 144
- 被引次数: 0
出版历程
- 收稿日期: 2017-04-05
- 刊出日期: 2017-07-31

Resource Utilization of Pyrolyzed Oil Cuttings (I):Study on Solidification of Oil Cuttings with Waste-slag Solidifier

CAI Hao¹,
YAO Xiao^{1,2
, ,},
XIAO Wei¹,
DONG Wei³,
HUA Sudong¹,
GU Zhong¹

1. College of Material Science and Engineering, Nanjing University of Technology, Nanjing, Jiangsu 210009;
2. The Synergetic Innovation Center for Advanced Materials, Nanjing, Jiangsu 210009;
3. The Drilling Fluid Branch of the GWDC, Panjin, Liaoning 124010

摘要

摘要: 针对油基钻屑热解吸处理过程中产生的危险废物残渣，采用废渣基固化剂CS对其进行了固化处理。考察了CS掺量对固化体无侧限抗压强度、水稳性、抗冻性和污染物浸出特性的影响，并利用XRD、SEM和MIP等测试方法，讨论了固化剂对热解油基钻屑的固化机理。结果表明：CS作为固化剂固化热解油基钻屑，其抗压强度及水稳系数（大于0.87）均优于参比样（掺水泥固化体）；冻融循环15次后，掺CS热解油基钻屑固化体仍能保持较高的强度值，试件质量损失较小且完整性良好；CS掺量为6%~15%时，热解油基钻屑固化体浸出液成分达到GB 8978-1996 Ⅰ级的要求；CS固化处理后，热解油基钻屑固化体中生成了大量C-S-H凝胶和少量AFt，使其基体结构更为致密，明显提高了固化体抗压强度、水稳性和抗冻性，同时能抑制热解油基钻屑中污染物的浸出。
- 热解油基钻屑 /
- 固化 /
- 水稳性 /
- 冻融循环 /
- 固化机理
Abstract: Hazardous and waste residue resulted from pyrolyzed oil cuttings were solidified with a waste-slag solidifier CS. Laboratory studies have been conducted on the effect of the amount of CS on the unconfined compressive strength, water stability, frost resistance and the characteristics of the leached pollutants of the solidified cuttings. Using XRD, SEM and MIP, the solidification mechanisms of the prolyzed oil cuttings with solidifiers were studied. It has been discovered that prolyzed oil cuttings solidified with CS had higher compressive strength and coefficient of water stability (0.87) than those of the reference samples. After alternate freezing and thawing for 15 times, the solidified prolyzed oil cuttings treated with CS still had higher compressive strength, lower mass losses and good integrity. Leached liquids from the prolyzed oil cuttings treated with solidifiers containing 6%-15% CS conforms to the class I requirement of the standard GB 8978-1996. After the solidification treatment, there were large amount of C-S-H gels and small amount of Aft in the solidified cuttings, making them much denser. The solidified cuttings have higher compressive strength, better water stability and frost resistance, and the leaching of pollutants from the prolyzed oil cuttings is also inhibited.
- Prolyzed oil cuttings /
- Solidify /
- Water stability /
- Alternate freezing and thawing /
- Solidification mechanisms

HTML全文

参考文献(12)

[1]	董大忠, 王玉满, 李新景, 等. 中国页岩气勘探开发新突破及发展前景思考[J]. 天然气工业, 2016, 36(1):19-32. DONG Dazhong,WANG Yuman,LI Xinjing, et al. Breakthrough and prospect of shale gas exploration and development in China[J]. Natural Gas Industry,2016, 36(1):19-32.
[2]	何涛, 李茂森, 杨兰平, 等. 油基钻井液在威远地区页岩气水平井中的应用[J]. 钻井液与完井液, 2012,29(3):1-5. HE Tao,LI Maosen, YANG Lanping, et al. Application of oil-based drillings fluis in shale gas horizontal well in district of weiyuan[J]. Drilling Fluid&Completion Fluid, 2012,29(3):1-5.
[3]	李学庆,杨金荣,尹志亮, 等. 油基钻井液含油钻屑无害化处理工艺技术[J]. 钻井液与完井液, 2013, 30(4):81-83. LI Xueqing,YANG Jinrong,YIN Zhiliang, et al. Novel harmless treatment technology of oily cuttings[J]. Drilling Fluid & Completion Fluid, 2013, 30(4):81-83.
[4]	ALMUDHHI S M. Environmental impact of disposal of oil-based mud waste in Kuwait[J].Petroleum Science & Technology,2016,34(1):91-96.
[5]	孙静文, 许毓, 刘晓辉,等. 油基钻屑处理及资源回收技术进展[J]. 石油石化节能, 2016, 6(1):30-33. SUN Jingwen, XU Yu,LIU Xiaohui, et al. Progress of oil-based mud treatment and resource recovery technology[J].Energy Conservation in Petroleum & Petrochemical Industry, 2016,6(1):30-33.
[6]	WAIT S T,THOMAS D. The characterisation of base oil recovered from the low temperature thermal desorption of drill cuttings[C]. SPE 80594, 2003.
[7]	朱冬昌, 付永强, 马杰,等. 长宁、威远页岩气开发国家示范区油基岩屑处理实践分析[J]. 石油与天然气化工, 2016, 45(2):62-66. ZHU Dongchang,FU Yongqiang, MA Jie, et al. Treatment practical analysis of oily cuttings in Changning and weiyuan national demonstration shale gas area[J]. Chemical Engineering of Oil & Gas,2016, 45(2):62-66.
[8]	何焕杰, 张淑侠, 王爱华, 等. 气田深井聚磺钻井液废液复合固化处理技术研究[J]. 环境工程学报, 2010, 4(11):2489-2493. HE Huanjie, ZHANG Shuxia,WANG Aihua, et al. Study on complex solidification treatment technology for polymer sulfated waste drilling fluids from gas field's deep well[J]. Chinese Journal of Environmental Engineering, 2010, 4(11):2489-249.
[9]	马金, 何焕杰, 张淑侠, 等. 一种油基钻屑的复合固化稳定化处理方法:CN, 103480639A[P]. 2014-01-01. MA Jing,HE Huanjie,ZHANG Shuxia, et al. Method for compound stabilization of oil-based drilling cuttings:CN, 103480639A[P]. 2014-01-01.
[10]	金吉中, 周伯均, 周泽军, 等. 以油基钻屑残渣制备烧结砖的方法:CN,105967649A[P]. 2016-09-28. JIN Jizhong, ZHOU Bojun, ZHOU Zejun, et al. Mothod for Preparation of fired brick from oil-based drilling cuttings residue:CN,105967649A[P]. 2016-09-28.
[11]	杨南如. C-S-H凝胶及其研究方法[J]. 硅酸盐通报, 2003,22(2):46-52. YANG Nanru. C-S-H gel and its determination methods[J]. Bulletin of The Chinese Ceramic Society, 2003, 22(2):46-52.
[12]	彭美勋, 蒋建宏, 王正红, 等. 泥浆固化充填材料的制备、微结构及其固化机理的研究[J]. 硅酸盐通报, 2011, 30(6):1294-1298. PENG Meixun,JIANG JIanhong,WANG Zenghong, et al. Study on preparation,microstructure and solidifying mechanism of backfill materials from mud solidification[J].Bulletin of The Chinese Ceramic Society, 2011, 30(6):1294-1298.