Study and Application of a High Temperature Drilling Fluid with Strong Plugging Capacity
-
摘要: 针对高温深部复杂地层的钻探需求,通过分子设计研发出一种抗温达200℃、具有刚性结构和高温形变能力的抗高温封堵防塌剂SMNA-1。该剂在140~200℃广谱温度范围内,能够通过其变形性和黏结性有效地堆积填充黏结滤饼,同时利用其自身的疏水性能在滤饼表面形成封堵膜,束缚自由水,增强滤饼的韧性和致密性、降低高温高压滤失量,提高钻井液的封堵防塌能力。以抗高温封堵防塌处理剂为主剂SMNA-1,优选抗高温降滤失剂SMPFL-L、SML-4和高效润滑剂SMJH-1等抗高温处理剂,构建出抗高温强封堵钻井液体系。抗高温聚合物降滤失剂SMPFL-L以丙烯酰胺、2-丙烯酰胺基长链烷基磺酸、双烯磺酸等单体采用自由基聚合制得,分子量较低,且分子量分布具有多分散性,饱和盐水基浆中加入2% SMPFL-L后可使高温高压滤失量降低至54 mL,该剂还具有良好的解絮凝作用,耐温达210℃。抗高温抗盐降滤失剂SML-4是针对高密度钻井液固相加重材料含量高对降滤失剂要求,研发的一种降滤失剂,其能够部分改变加重材料表面性质,提高加重材料的分散性,降低水化膜厚度,4% SML-4可使高密度盐水浆的API滤失量由164 mL降至5.8 mL,且不增加钻井液的黏度。在密度为2.0 g/cm3钻井液中加入2%高效润滑剂SMJH-1,极压润滑系数降低率为24%。该体系在新疆顺北1-1H井三开井段现场应用近1 300 m,施工顺利,未出现任何复杂情况,试验井段平均井径扩大率仅6.88%,井身质量好,取得了良好的应用效果。Abstract: A high temperature borehole wall stabilizing agent SMNA-1 was developed to resolve problems encountered in high temperature deep well drilling. SMNA-1 functions at high temperature to above 200℃. It has a rigid molecular structure and is deformable at high temperature. SMNA-1 is able to enhance the strength of mud cake through its deformability and cohesion capacity. SMNA-1, through its hydrophobicity, also forms a sealing membrane on the surface of mud cake to bind free water and enhance the toughness and consistence of the mud cake, thereby reducing HTHP flter loss and enhancing the capacity of drilling fluid to plugging and stabilizing borehole wall. A high temperature polymer flter loss reducer, SMPFL-L, was synthesized with acrylamide, 2-acrylamide long carbon chain sulfonic acid and diene sulfonic acid through free radical polymerization. SMPFL-L has low widely distributed molecular weight. A saturated saltwater drilling fluid treated with 2%SMPFL-L had its HTHP flter loss reduced to 54 mL. The property of SMPFL-L remained stable at 210℃, and had good deflocculating ability. SML-4, a high temperature salt-resistant flter loss reducer, has been developed for use in high density muds weighted with weighting materials that will result in high solids content. SML-4 is able to alter the surface behavior, enhance the dispersity, and thin the hydration flm of weighting material. A high density saltwater drilling fluid treated with 4% SML-4 had its API flter loss reduced from 164 mL to 5.8 mL, without increasing the viscosity of the drilling fluid. A drilling fluid of 2.0 g/cm3 treated with 2% SMJH-1 had its extreme pressure friction coeffcient reduced by 24%. A high temperature drilling fluid with strong plugging capacity has been developed with SMNA-1 as the main additive, SMPFL-L and SML-4 as flter loss reduces, SMJH-1 as high effciency lubricant. This drilling fluid formulation was successfully used in drilling the third interval (1,300 m) of the well Shunbei-1-1H located in Xinjiang, and no downhole troubles were encountered. The average percent hole enlargement was only 6.88%, and good application results were achieved.
-
[1] LI N, SHI X, LI J, et al. Completely cationic drilling fluid system relieved ultra-deep wells drilling difficulties[C]. SPE 176369, 2015. [2] ZHONG H, QIU Z, CHEN G, et al. Improving the wellbore stability while drilling long open hole shale intervals in tahe oil field[C]. SPE 176165, 2015. [3] CHEN P, CHENG C, XIN J, et al. Drilling of an ultra-deep exploratory well-problems and aolutions:a case study[C]. SPE 155826. 2012. [4] 王沫, 杜欢, 伊尔齐木, 等. 顺南井区优快钻井技术[J]. 石油钻探技术, 2015, 43(3):50-54.WANG Mo, DU Huan, EERQM, et al. Optimal and fast drilling technology for shunnan block[J]. Petroleum Drilling Techniques, 2015, 43(3):50-54. [5] 陈富全, 夏荣徽, 聂强勇, 等. 专项封堵防塌技术在塔中油田的应用[J]. 钻井液与完井液, 2015, 32(2):58-60.CHEN Fuquan, XIA Ronghui, NIE Qiangyong, et al. Application of special plugging and collapse prevention technology in Tazhong oilfield[J]. Drilling Fluid & Completion Fluid, 2015, 32(2):58-60. [6] 杨小华. 提高井壁稳定性的途径及水基防塌钻井液研究与应用进展[J]. 中外能源, 2012, 17(5):53-57.YANG Xiaohua. The way of improving wellbore stability and progress of research and application of water-based anti-sloughing drilling fluid[J]. Sino-Global Energy, 2012, 17(5):53-57. [7] 刘音, 崔远众, 张雅静, 等. 钻井液用页岩抑制剂研究进展[J]. 石油化工应用, 2015, 34(7):7-10.LIU Yin, CUI Yuanzhong, ZHANG Yajing, et al. Research progress of shale inhibition for drilling fluid[J]. Petrochemical Industry Application, 2015, 34(7):7-10. [8] 林常茂, 张永青, 刘超, 等. 新型井壁稳定剂DLF-50的研制与应用[J]. 钻井液与完井液, 2015, 32(4):17-20.LIN Changmao, ZHANG Yongqing, LIU Chao, et al. Development and application of the new shale stabilizer DLF-50[J]. Drilling Fluid & Completion Fluid, 2015, 32(4):17-20. [9] 曹成, 蒲晓林, 王贵, 等. 水基钻井液用防塌封堵剂封堵效果实验研究[J]. 应用化工, 2015, 44(2):247-249.CAO Cheng, PU Xiaolin, WANG Gui, et al. Research on the sealing performance of sealing agents for waterbased drilling fluids[J]. Applied Chemical Industry, 2015, 44(2):247-249. [10] 邱正松, 张世锋, 黄维安, 等. 新型铝基防塌剂的研制及防塌作用机理[J]. 石油学报, 2014, 35(4):754-758.QIU Zhengsong, ZHANG Shifeng, HUANG Wei' an, et al. A novel aluminum-based shale/mudstone stabilizer and analysis of its mechanism for wellbore stability[J]. Acta Petrolei Sinica, 2014, 35(4):754-758. [11] 孔勇, 杨小华, 徐江, 等. 抗高温防塌处理剂合成研究与评价[J]. 钻井液与完井液, 2016, 33(2):17-21.KONG Yong, YANG Xiaohua, XU Jiang, et al.Synthesis and evaluation of a high temperature inhibitive additive[J]. Drilling Fluid & Completion Fluid, 2016, 33(2):17-21. [12] 马文英. 中国石化沥青类处理剂标准探析[J]. 石油工业技术监督, 2015(1):29-33. MA Wenying. Analysis of standards of Sinopec for asphalt treatment agents[J]. Technology Supervision in Petroleum Industry, 2015(1):29-33 [13] 高永会, 刘晓栋, 谭文礼, 等. 提高聚醚多元醇钻井液性能的添加剂研究[J]. 钻井液与完井液, 2014, 31(6):5-8.GAO Yonghui, LIU Xiaodong, TAN Wenli, et al. Study on key additives for improving performance of polyether polyalcohol drilling fluid[J]. Drilling Fluid & Completion Fluid, 2014, 31(6):5-8. [14] 张洪伟, 左凤江, 李洪俊, 等. 微裂缝封堵剂评价新方法及强封堵钻井液配方优选[J]. 钻井液与完井液, 2015, 32(6):43-45.ZHANG Hongwei, ZUO Fengjiang, LI Hongjun, et al. Method for evaluation of plugging of nano-micron fractures[J]. Drilling Fluid & Completion Fluid, 2015, 32(6):43-45. [15] 张洪伟, 解经宇, 左凤江, 等. 强封堵有机盐钻井液在致密油水平井中的应用[J]. 钻井液与完井液, 2013, 30(3):43-46.ZHANG Hongwei, XIE Jingyu, ZUO Fengjiang, et al.Application on high sealing organic salt drilling fluid system in tight oil reservoir horizontal well[J]. Drilling Fluid & Completion Fluid, 2013, 30(3):43-46.
点击查看大图
计量
- 文章访问数: 598
- HTML全文浏览量: 150
- PDF下载量: 425
- 被引次数: 0