[1] |
秦国宏,宋元洪,刘书东,等. 平衡压力固井工艺在束探1H(P)井的应用[J]. 钻井液与完井液,2013,30(5):63-66.QIN Guohong,SONG Yuanhong,LIU Shudong,et al. Balanced pressure cementing technology in well Sutan 1H (P)[J].Drilling Fluid & Completion Fluids,2013,30(5): 63-66.
|
[2] |
李世斌,冯春,郝丽丽. 鹤岗煤层气固井顶替流态选择及压力计算方法[J]. 科学技术与工程,2011,31(11): 7762-7765.LI Shibin,FENG Chun,HAO Lili.Well cementing replacement flow regime selecting andcomputing method of coal bed gas in Hegang[J].Science Technology and Engineering,2011,31(11):7762-7765.
|
[3] |
张顺平,张森,覃毅,等. 威远页岩气水平井高密度防窜水泥浆固井技术[J]. 钻井液与完井液,2016,33 (1):63-67.ZHANG Shunping,ZHANG Sen,TAN Yi,et al.Antichanneling high density cement slurry technology for horizontal shale gas well in weiyuan[J].Drilling Fluid & Completion Fluid,2016,33(1):63-67.
|
[4] |
丁士东. 塔河油田紊流、塞流复合顶替固井技术[J]. 石油钻采工艺,2002,24(1):20-23.DING Shidong.Combination displacement cementing of turbulent and plug flow in tahe oil field[J].Oil Drilling & Production Technology,2002,24(1):20-23.
|
[5] |
刘崇建,黄柏宗,徐同台,等. 油气井注水泥理论与应用[M]. 北京:石油工业出版社,2001:278. LIU ChongJian,HUANG Bozong,XU Tongtai,et al.Oil and gas well cementing theory and applications[M]. Beijing:Petroleum Industry Press,2001:278.
|
[6] |
林辉,林志辉,王贵富,等. 南堡3-81 井高温尾管固井技术[J]. 钻井液与完井液,2014,31(6):89-91.LIN Hui,LIN Zhihui,WANG Guifu,et al.Liner cementing under high temperature for well Nanpu3-81[J]. Drilling Fluid & Completion Fluid,2014,31(6): 89-91.
|
[7] |
步玉环,侯献海,郭胜来. 低温固井水泥浆体系的室内研究[J]. 钻井液与完井液,2016,33(1):79-83.BU Yuhuan,HOU Xianhai,GUO Shenglai.Study on low temperature cementing slurry cementing[J].Drilling Fluid & Completion Fluid,2016,33(1):79-83.
|
[8] |
李早元,支亚靓,邓智中,等. 库车山前井防漏固井方法技术研究[J]. 钻井液与完井液,2015,32(3): 55-58.LI Zaoyuan,ZHI Yaliang,DENG Zhizhong,et al.Technology for lost circulation control during well cementing in piedmont wells[J].Drilling Fluid & Completion Fluid,2015,32(3):55-58.
|
[9] |
钟福海,何树华,高飞,等. 阳探1 井循环高泵压条件下的固井技术[J]. 钻井液与完井液,2015,32(5): 98-100.zhongfuhai,heshuhua,gaofei,et al.Well cementing technology for well yangtan-1 with high circulation pressure[J].Drilling Fluid & Completion Fluid,2015,32(5): 98-100.
|