北部湾水基钻井液固相控制与重复利用技术

程玉生; 张立权; 莫天明; 向雄; 张明

doi:10.3969/j.issn.1001-5620.2016.02.013

北部湾水基钻井液固相控制与重复利用技术

doi: 10.3969/j.issn.1001-5620.2016.02.013

中海油田服务股份有限公司油田化学事业部, 广东湛江 524057

详细信息

作者简介:
程玉生,工程师,硕士,1980年生,毕业于中国石油大学(华东)石油与天然气工程专业,现在从事钻井液与完井液的技术管理与应用工作。电话(0759)3911585;E-mail:chengysh@cosl.com.cn。

中图分类号: TE92
计量
- 文章访问数: 622
- HTML全文浏览量: 122
- PDF下载量: 225
- 被引次数: 0
出版历程
- 收稿日期: 2015-11-17
- 刊出日期: 2016-03-31

Solids Control and Re-use of Water Base Drilling Fluid in Beibu Gulf

Shenzhen Base of Division of Oilfield Chemistry, COSL, Zhanjiang, Guangdong 524057, China

摘要

摘要: 北部湾地区地质条件复杂,钻井难度大,结合北部湾地区钻探的实际情况,通过对影响水基钻井液重复利用因素的分析,对废弃钻井液的粒度分析和性能检测制定了一套成熟的固相控制技术。通过检测废弃钻井液中固相颗粒粒径分布,优化固控设备的搭配和参数配置(尤其是振动筛筛布选择),选择离心机分离能力、布局和台数等,从而提高固相控制效率,达到有效净化废弃钻井液的目的;制定了一套合适的废弃钻井液处理方式:先检测回收的废弃钻井液性能,然后通过固控设备来净化废弃钻井液,合理配制新浆量进行稀释处理废弃钻井液,使钻井液性能满足下一口井或井段的开钻要求,节省了材料成本、人工成本和运输成本。北部湾水基钻井液固相控制与重复利用技术在北部湾地区29口开发井进行了成功应用。
- 废弃钻井液 /
- 重复利用 /
- 固相控制 /
- 水基钻井液 /
- 北部湾
Abstract: Formation geology in the Beibu Gulf area is complex,making drilling operation very difficult.Solids control plays an important role in the success of drilling in this area.A complete set of solids control technology has been developed through laboratory analyses and experiments.The configuration and parameter specifications of solids control equipment (especially the selection of the screen cloth for shale shakers) are optimized through inspection of particle size distribution of the water drilling fluids.The treatment capacity,configuration and number of centrifuges are carefully determined to enhance the efficiency of solids control.In the treatment of the waste drilling fluids,the properties of the waste drilling fluids are firstly measured,then the waste drilling fluids are cleaned through the solids control equipment,and some new drilling fluids are prepared for use with the cleaned waste drilling fluids.In this way the properties of the drilling fluid satisfy the needs for the next hole section or the next well,and the mud cost,labor cost and transportation cost are all reduced.This technology has been successfully used on 29 wells in the Beibu Gulf area.
- Waste drilling fluid /
- Re-use /
- Solids control /
- Water base drilling fluid /
- Beibu Gulf

HTML全文

参考文献(8)

梁文利. 现场废弃油基钻井液的优化研究[J]. 钻井液与完井液, 2012, 29(3):9-12. LIANG Wenli. Optimization research of the well site waste oil-based drilling fluid[J].Drilling Fluid & Completion Fluid, 2012, 29(3):9-12.

鲍泽富, 刘江波, 王江萍, 等. 钻井液回收净化再利用系统的设计[J], 石油机械, 2006, 34(6):46-49. BAO Zefu, LIU Jiangbo, WANG Jiangping, et al. The design of a system for drilling fluid recovery and purification[J].Petroleum Machinery, 2006, 34(6):46-49.

程玉生, 符士山, 王韶春. 涠西南地区探井钻井液技术[J]. 钻井液与完井液, 2009, 26(2):105-107. CHENG Yusheng, FU Shishan, WANG Shaochun. Drilling fluid technology used for exploration wells in weixinan area[J]. Drilling Fluid & Completion Fluid, 2009, 26(2):105-107.

陈孝彦. 钻井废弃泥浆固化处理技术综述[J]. 科技与企业, 2012(14):338-339. CHEN Xiaoyan. Solidification treatment of waste drilling fluid[J].Science-Technology & Enterprise, 2012(14):338-339.

潘宝风, 兰林, 李尚贵等. 废弃钻井液的固化烧结与再利用研究[J]. 钻井液与完井液, 2011, 28(1):66-68. PAN Baofeng, LAN Lin, LI Shanggui, Study on curing sintering and utilization of waste drilling fluid[J]. Drilling Fluid & Completion Fluid, 2011, 28(1):66-68.

于承朋. 钻井废弃物处理的计算机模型[J]. 国外油田工程, 2007, 23(1):27-29. YU Chengpeng. Computer models address drilling waste management[J].Foreign Oilfield Engineering, 2007, 23(1):27-29.

周风山, 曾光, 何纶, 等. 废弃钻完井液固液分离技术研究进展[J]. 钻井液与完井液, 2007, 34(S0):59-64. ZHOU Fengshan, ZENG Guang, HE Lun, et al. The technology research progress of solid-liquid separation of waste drilling and completion fluid[J]. Drilling Fluid & Completion Fluid. 2007, 34(S0):59-64.

赵向阳, 林海, 张振活, 等. 长北气田钻井液回收重复利用实践与认识[J]. 钻井液与完井液, 2013, 30(1):80-82. ZHAO Xiangyang, LIN Hai, ZHANG Zhenhuo, et al. The practice and understanding of Changbei drilling fluid recycling[J]. Drilling Fluid & Completion Fluid, 2013, 30(1):80-82.

施引文献

资源附件(0)

访问统计