清洁自生热压裂液技术与实验方法

熊波; 徐敏杰; 王丽伟; 车明光; 刘玉婷

doi:10.3969/j.issn.1001-5620.2016.01.024

清洁自生热压裂液技术与实验方法

doi: 10.3969/j.issn.1001-5620.2016.01.024

1.
中国石油大学(北京)石油工程学院, 北京 102249
2. 中国石油勘探开发研究院廊坊分院, 河北廊坊 065007

基金项目: 国家科技重大专项"低渗特低渗油气储层高效改造技术"(2011ZX05013-003);股份公司课题"特低、超低渗油藏高效改造关键技术"(2011B-1202)

详细信息

作者简介:
熊波,男,高级工程师,博士后,1979年生,研究方向为油气田开发研究。电话(010)69213252;E-mail:xiongb69@petrochina.com.cn。

中图分类号: TE357.12
计量
- 文章访问数: 601
- HTML全文浏览量: 135
- PDF下载量: 199
- 被引次数: 0
出版历程
- 收稿日期: 2015-11-09
- 刊出日期: 2016-01-30

Clear Autogenetic Heat Fracturing Fluid and Its Experiment

1.
College of Petroleum Engineering, China University of Petroleum(Beijing), Beijing 102249, China
2. Langfang Branch of Research Institute of Petroleum Exploration and Development, Langfang Hebei 065007, China

摘要

摘要: 目前已有的多种自生热压裂液体系,通常需要加入活化剂,配制过程复杂。研究了一种采用疏水聚合物作为稠化剂的清洁自生热压裂液体系,该稠化剂在合成过程中添加了耐盐单体,保证其在盐水中有高溶解性;采用有机锆酸性交联剂,提供酸性交联环境,无需加入生热反应所需要的活化剂和交联反应所需要的调节剂。稠化剂使用浓度为0.6%,具有良好的耐温耐剪切性能、黏弹性能及破胶性能,在100℃、170 s^-1下剪切60 min后黏度为140 mPa·s左右,黏弹性与常规瓜胶压裂液相当,残渣含量为11.9 mg/L,残渣伤害小,适用于中低温储层。采用高温高压动态酸化腐蚀仪,通过监测压力变化,计算了生热剂的反应程度,该操作简单,计量准确,可用于自生热压裂液体系配方优化及反应程度的估算。研究结果表明,在40℃时,基液中生热剂之间不发生反应,80℃时反应程度约为55%,120℃时反应完全,因此该体系适合提前配制,实施方法与常规压裂液相同。
- 自生热压裂液 /
- 清洁压裂液 /
- 疏水聚合物稠化剂 /
- 有机锆酸性交联剂 /
- 高温高压动态酸化腐蚀仪
Abstract: Several autogenetic heat fracturing fluids find their use in reservoir fracturing. In autogenetic heat fracturing, activating agent is added into the fracturing fluid for heat generation, and this makes the process much less efficient. A clear autogenetic fracturing fluid was prepared using a hydrophobic polymer as the thickening agent. The thickening agent has a salt-resistant component added during its synthesis, enabling the thickening agent to be readily dissolving in saltwater. Using organo-zirconiumacidic crosslinking agent, activating agent using for heat generation and modifying agent for crosslinking reaction are not necessary anymore. Fracturing fluid treated with 0.6% of the thickening agent has good heat-resistance and shear-resistance, good elasticity and gel breaking capacity. After shearing for 60 min at 100℃ and 170 s^-1, the fracturing fluid retains a viscosity of about 140 mPa·s, and its visco-elasticity equivalent to that of conventional guar gum fracturing fluids. Residue of the fracturing fluid is 11.9 mg/L. This fracturing fluid is suitable for use in fracturing medium-to low-temperature reservoirs. By monitoring pressure changes of the reaction, the extent of reaction of heat generators is measured on a HTHP dynamic acidizing corrosion tester, and this measurement is both simple and accurate, suitable for the optimization of the formulation of autogenetic heat fracturing fluids, and the assessment of the extent of reaction of heat generators. The study shows that no reaction has ever taken place between heat generators in base fluid at 40℃, and 55% of the heat generators react at 80℃, while at 120℃, all heat generators react with each other, indicating that the fracturing fluid should be prepared in advance, and the operation process is the same as that of conventional fracturing fluids.
- Autogenetic heat fracturing fluid /
- Clear fracturing fluid /
- Hydrophobic polymer thickening agent /
- Organo-zirconium acidic crosslinking agent /
- HTHP dynamic acidizing corrosion tester

HTML全文

参考文献(10)

吴安明,陈茂涛,顾树人,等. NaNO₂与NH₄Cl反应动力学及其在油田的应用研究[J]. 石油钻采工艺, 1995,17(5):60-64. Wu Anming, Chen Maotao, Gu Shuren, et al. Study on the reaction kinetics of sodium nitrite with ammonium chloride and its applications in oilfields[J].Oil Drilling & Production Technology, 1995,17(5):60-64.

Mitchell T I,Donovan S C,Collesi J B,et al. Field application of a chemical heatand nitrogen eenerating system[C]. SPE 12776,1984:423-428.

Ashton J P,Kirspel L J,Nguyen H T,et al. In-situ heat system stimulates paraffinic crude producers in gulf of mexieo[J].Spe Production Engineering,1989, 4(2):157-160.

刘蜀知,孙艾茵,刘福健,等. 自生热压裂生热剂用量优化方法. 石油钻采工艺,2003,25(1):45-48. Liu Shuzhi,Sun Aiyin,Liu Fujian, et al.Optimization methods of concentration of heat-generation agents in in-situ heat fracturing treatment[J]. Oil Drilling & Production Technology,2003,25(1):45-48.

程运甫,李延美,何志勇,等. 自生热压裂液的研制及现场应用. 油田化学,1997,14(1):24-27. Cheng Yunfu,Li Yanmei,He Zhiyong,et al. Preparation and field uses of heat-generating hydrofracturing fluids[J]. Oilfield Chemistry,1997,14(1):24-27.

彭轩,刘蜀知,刘福健. 针对高凝油油藏的自生热压裂技术. 特种油气藏,2003,10(2):80-81. Peng Xuan, Liu Shuzhi, Liu Fujian. Thermogenic fracturing technique for high pour-point oil reservoir[J]. Special oil and gas reservoirs, 2003,10(2):80-81.

欧阳坚,孙广华,王贵江,等.耐温抗盐聚合物TS-45流变性及驱油效率研究[J]. 油田化学,2004, 21(4):330-333. Ouyang Jian,Sun Guanghua,Wang Guijiang,et al. Studies on rheologial behavoir and oil displacement efficiency ofheat resistant and salts tolerant tercopolymer TS-45[J]. Oilfield Chemistry,2004,21(4):330-333.

杨振周,陈勉,胥云,等.新型合成聚合物超高温压裂液体系[J]. 钻井液与完井液,2011,28(1):49-51. Yang Zhenzhou, Chen Mian, Xu Yun,et al. Research of new ultra high temperature synthetic polymer fracturing fluid[J].Drilling Fluid & Completion Fluid,2011,28(1):49-51.

周成裕, 陈馥, 黄磊光.一种疏水缔合物压裂液稠化剂的室内研究[J]. 石油与天然气化工, 2008, 5(1):62-67. Zhou Chenyu,Chen Fu,Huang Leiguang. A laboratory study on one kind of hydrophobic association fracturing fluid gelatinizer[J]. Chemical Engineering of Oil and Gas,2008,5(1):62-67.

王丽伟,程兴生,翟文,等. 压裂液黏弹特性与悬浮支撑剂能力研究[J]. 油田化学,2014,31(1):38-41. Wang Liwei, Cheng Xingsheng, Zhai Wen,et al. Viscoelasticity of fracturing fluid and the proppant suspending capacity[J]. Oilfield Chemistry,2014,31(1):38-41.

施引文献

资源附件(0)

访问统计