Drilling Fluid Technology for Drilling Nanpu Buried Hill Oil Reservoir
-
摘要: 冀东油田南堡潜山油气藏埋藏深(4000~5600 m),地温梯度大(4.22°/100 m),井底最高温度为223℃,地层压力系数低,为0.96,储层微裂缝发育,气油比大。为满足其储层保护和安全生产的需要,研究了抗220℃高温低密度低固相钻井液和抗170℃高温冻胶阀技术。抗高温低密度低固相钻井液选择2种四元共聚物分别作抗高温增黏剂和抗高温降滤失剂,并配合使用SMP和SPNH以及耐温封堵剂FT3000,抗高温水包油钻井液由研制的抗温能力强、抗盐能力好的HWZR和HWFR乳化剂,优选出的增黏剂HVF-H和抗高温降滤失剂HWFL-H与HVS-H等组成,2套体系在220℃老化48 h性能良好,可满足井眼清洁的需要,使用密度范围为0.98~1.08 g/cm3;抗高温冻胶阀实现了起下钻和套管回接过程分隔油气层和保护油气层的目的。目前已钻井22口,8口探井应用了抗高温低固相钻井液,13口开发井应用了水包油钻井液,2口井应用了抗高温冻胶段塞封堵技术,均取得良好的效果,确保了全过程油气层保护。Abstract: The Nanpu buried hill oil reservoir(Jidong Oilfield) is characteristic of deep burial at 4, 000-5, 600 m, high formation temperature(4.22℃/100 m, and 223℃ atbottom hole), low formation pressure(pressure coefficient 0.96), and developed fractures.The produced oil has high gas/oil ratios.A high temperature low density low solids content drilling fluid and a high temperature gel plug have been developed for use in reservoir drilling in Nanpu.The high temperature drilling fluid retains its good performance at 220℃, and the gel plug functions at 170℃.In formulating the high temperature low density low solids drilling fluid, two tetra-polymers were chosen as the high temperature viscosifiers and high temperature filter loss reducer, respectively.SMP, SPNH and a high temperature sealing agent, FT3000, were also used to improve the properties of the drilling fluid.A high temperature oil-in-water drilling fluid was formulated with two emulsifiers, HWZR and HWFR, (both are high temperature stable and salt resistant) a viscosifier HVF-H and two high temperature filter loss reducers, HWFL-H and HVS-H.The two drilling fluids have good performance after aging at 220℃ for48 h, and densities ranging between 0.98 g/cm3 and 1.08 g/cm3.Using the gel plug, oil and gas zones are isolated and protected during pipe tripping and casing tieback.The high temperature low density low solids drilling fluid has been used in 8 wells, the oil-in-water drilling fluid used in 13 wells, and the gel plug used in 2 wells, all proved successful in reservoir protection.
-
谢彬强,邱正松. 基于新型增黏剂的低密度无固相抗高温钻井液体系[J]. 钻井液与完井液, 2015, 32(1):1-6. Xie Binqiang, Qiu Zhengsong. Development and evaluation of low density solids-free high temperature drilling fluid[J]. Drilling Fluid & Completion Fluid, 2015, 32(1):1-6. 朱宽亮, 王富华, 徐同台,等. 抗高温水基钻井液技术研究与应用现状及发展趋势(Ⅰ)[J]. 钻井液与完井液, 2009,26(5):60-68. Zhu Kuanliang, Wang Fuhua, Xu Tongtai, et al.Status in qua and progress(Ⅰ):study and application of high temperature drilling fluids(Ⅰ)[J].Drilling Fluid & Completion Fluid,2009,26(5):60-68. 朱宽亮, 王富华, 徐同台,等. 抗高温水基钻井液技术研究与应用现状及发展趋势(Ⅱ)[J]. 钻井液与完井液, 2009,26(6):56-64. Zhu Kuanliang, Wang Fuhua, Xu Tongtai, et al.Status in qua and progress(Ⅱ):study and application of high temperature drilling fluids(Ⅱ)[J].Drilling Fluid & Completion Fluid,2009,26(6):56-64. 黄维安,王在明,胡中志,等. 低固相超高温水基钻井液研究及应用[J]. 钻井液与完井液, 2015, 32(2):1-5. Huang Weian, Wang Zaiming, Hu Zhongzhi, et al. Study and application of low solids ultra-high temperature water base drilling fluid[J]. Drilling Fluid & Completion Fluid, 2015, 32(2):1-5. 张高波, 徐家良, 史沛谦, 等. 抗高温低密度水包油钻井液在文古2井的应用[J]. 钻井液与完井液,2002,19(3):30-32. Zhang Gaobo, Xu Jialiang,Shi Peiqian,et al.Application of high temperature and low density oil-in-water drilling fluid in well Wengu-2[J].Drilling Fluid & Completion Fluid, 2002,19(3):30-32. 马文英, 刘彬, 卢国林,等. 抗温180℃水包油钻井液研究及应用[J]. 断块油气田,2013, 20(2):228-230. Ma Wenying, Liu Bin, Lu Guolin, et al.Study and application of anti-temperature 180℃ oil-in-water drilling fluid[J]. Fault-Block Oil & Gas Field,2013, 20(2):228-230. 胡挺,曾权先, 李华磊,等. 冻胶阀完井技术研究与应用石油[J]. 石油钻采工艺,2012,34(1):32-35. Hu Ting, Zeng Quanxian,Li Hualei,et al.Study and application of smart pack completion technology[J].Oil Drilling & Production Technology,2012,34(1):32-35. 王维,杨波,李占伟,等. 抗高温聚束钻井液在南堡3-15井的应用[J]. 钻井液与完井液,2014,31(4):15-18. Wang Wei, Yang Bo, Li Zhanwei, et al. Application of high temperature polymeric micelle drilling fluid in Well Nanpu3-15[J].Drilling Fluid & Completion Fluid,2014, 31(4):15-18. 朱宽亮, 卢淑芹, 徐同台, 等. 南堡5-4井抗200℃高温钻井液的研究及应用[J]. 钻井液与完井液,2009,26(2):49-51. Zhu Kuanliang, Lu Shuqin, Xu Tongtai, et al. A study and application of high temperature drilling fluid for well nanpu5-4[J].Drilling Fluid & Completion Fluid,2009,26(2):49-51. 李栓, 张家义, 秦博,等.BH-KSM钻井液在冀东油田南堡3号构造的应用[J]. 钻井液与完井液, 2015, 32(2):93-96. Li Shuan, Zhang Jiayi, Qin Bo, et al. Application of BH-KSM Drilling Fluid in Nanpu 3# Structure of Jidong Oilfield[J].Drilling Fluid & Completion Fluid,2015,32(2):93-96. 张立民, 赵亚宁, 卢淑芹, 等. 无固相弱凝胶钻井完井液在南堡油田的应用[J]. 钻井液与完井液, 2010, 27(2):81-83. Zhang Limin, Zhao Yaning, Lu Shuqin, et al. The application of solids-flee weak gel drill-in fluid in block nanpu[J].Drilling Fluid & Completion Fluid,2010,27(2):81-83.
点击查看大图
计量
- 文章访问数: 610
- HTML全文浏览量: 135
- PDF下载量: 169
- 被引次数: 0