Development of Polymer Gel Temporary Plugging Agent and the Application
-
摘要: 老君4井为普光边缘的一口高含硫气井，经酸压后，地层压力系数低，液面亏空达1200 m，需进行高强度暂堵后才可进行投产作业，且该井安装两个间隔1 m且内径小（45 mm）循环阀，常规暂堵剂无法顺利通过循环阀内径。针对以上难题，以AMPS、AM为单体，复合一定粒径的无机材料，协同盐和除氧剂等材料，开发出了聚合物凝胶暂堵剂并在老君4井进行了成功应用，室内和现场实验表明：聚合物凝胶暂堵体系130 ℃下高黏度维持时间长达15 d以上，封堵承压达27 MPa，可阻滞高含硫气从井筒逸出，解堵率高，投产后产量约1.20×106 m3/d，应用效果良好。Abstract: Laojun 4 Well is a high sulfur gas well located on the edge of Puguang, after acid fracturing, The formation pressure coefficient is low, before putting into production, the temporary plugging is necessary,but there has two Circulation valves stalled within 1m,the normal temporary plugging agents cannot smoothly pass through the inner diameter of the circulation valve.In view of the above problems, a polymer gel temporary plugging agent has been developed and successfully applied in Laojun 4 Well.Laboratory and field experiments show that the polymer gel temporary plugging agent has a plugging pressure of 27 MPa and a validity period of 15 days at 130 ℃, with the high plugging removal rate,it can block the gas escape from the wellbore. After being put into production, the output is about 1.2 million m3/d, the effect of site application is super.
-
Key words:
- Polymer gel /
- Temporary plugging /
- Gas stagnation /
- Plugging
-
表 2 悬浮稳定性实验
ρ常温5 h/g·cm-3 ρ130 ℃/5 d/g·cm-3 ρ130 ℃/15 d/g·cm-3 上部 1.20 1.18 1.15 1.20 1.18 1.18 中部 1.19 1.20 1.17 1.19 1.20 1.19 下部 1.20 1.20 1.22 1.20 1.20 1.20 
下载: 导出CSV
-
[1] 熊继有,蒲克勇,王平全,等. 物理法随钻防漏堵漏机制与试验[J]. 中国石油大学学报:自然科学版,2009,33(4):76-80.XIONG Jiyou, PU Keyong, WANG Pingquan, et al. Mechanism and experiment of physical leak resistance and sealing while drilling[J]. Journal of China University of Petroleum:Natural Science Edition, 2009, 33(4):76-80. [2] 郭锦棠,王美玉,张克明,等. 高温油藏暂堵剂的制备与性能研究[J]. 天津大学学报,2019,52(1):1-6.GUO Jintang, WANG Meiyu, ZHANG Kepeng, et al. Synthesis and performance evaluation of temporary plugging agent used in high-temperature reservoir[J]. Journal of Tianjin University, 2019, 52(1):1-6. [3] 张艳英. 低温油藏调剖用聚合物凝胶体系研究及应用[D]. 成都: 西南石油大学, 2012.ZHANG Yanying. Research and application of polymer gel system for profile control of low-temperature reservoirs[D]. Chengdu: Southwest Petroleum University, 2012. [4] 黄春龙. 无机有机复合型颗粒堵漏剂的制备及应用研究[D]. 天津: 天津科技大学, 2015.HUANG Chunlong. Preparation and application research of inorganic organic composite particle plugging agent[D]. Tianjin: Tianjin University of Science and Technology, 2015. [5] 李劢,郭兴芳,申世峰,等. 过硫酸盐不同活化方式的研究进展[J]. 天津科技,2021,48(1):37-41. doi: 10.3969/j.issn.1006-8945.2021.01.009LI Mai, GUO Xingfang, SHEN Shifeng, et al. et al research progress on different activation methods of persulfate[J]. Tianjin Science & Technology, 2021, 48(1):37-41. doi: 10.3969/j.issn.1006-8945.2021.01.009 [6] 杨世迎,陈友媛,胥慧真,等. 过硫酸盐活化高级氧化新技术[J]. 化学进展,2008,20(9):1433-1438.YANG Shiying, CHEN Youyuan, XU Huizhen, et al. A novel advanced oxidation technology based on activated persulfate[J]. Progress in Chemistry, 2008, 20(9):1433-1438. [7] 高玉军. 耐高温耐盐聚丙烯酰胺类调堵剂的研究[D]. 武汉: 武汉工程大学, 2013.GAO Yujun. Research on high temperature and salt resistant polyacrylamide type plugging agents[D]. Wuhan: Wuhan University of Engineering, 2013. [8] 李志臻,杨旭,王中泽,等. 一种抗温抗盐交联聚合物堵水剂的合成及性能评价[J]. 应用化工,2014,43(7):1288-1293.LI Zhizhen, YANG Xu, WANG Zhongze, et al. Synthesis and evaluation of a high-temperature and salt resistance polymer water shutoff agent[J]. Applied Chemical Industry, 2014, 43(7):1288-1293. [9] 刘阳阳. 适用于高温高盐油藏新型聚合物的合成及其凝胶体系开发[D]. 成都: 西南石油大学, 2016.LIU Yangyang. Development of synthetic machine gel system suitable for new polymers in high-temperature and high salinity reservoirs[D]. Chengdu: Southwest Petroleum University, 2016. [10] 赖小林,王中华,郭建华,等. 吸水材料在石油钻井堵漏中的应用[J]. 精细石油化工进展,2010,11(2):17-21.LAI Xiaolin, WANG Zhonghua, GUO Jianhua, et al. Application of water-absorbent materials in petroleum drilling loss control[J]. Advances in Fine Petrochemicals, 2010, 11(2):17-21. [11] 杨连利,梁国正. 黄原胶辐射接枝丙烯酸及其耐盐性研究[J]. 精细化工,2008,25(4):397-400.YANG Lianli, LIANG Guozheng. Grafting of acrylic acid onto xanthan gum by 60Co irradiation and its resistance to salt[J]. Fine Chemicals, 2008, 25(4):397-400. [12] 吴小军,童群义. 耐热性黄原胶的制备与性能[J]. 高分子材料科学与工程,2008,24(3):152-154,158. doi: 10.3321/j.issn:1000-7555.2008.03.039WU Xiaojun, TONG Qunyi. Preparation and properties of xanthan gum with high thermal stability[J]. Polymer Materials Science & Engineering, 2008, 24(3):152-154,158. doi: 10.3321/j.issn:1000-7555.2008.03.039 [13] 李辉,李宇剑. 黄原胶/AMPS/膨润土制备油田堵水剂的研究[J]. 石油化工高等学校学报,2011,24(6):42-45.LI Hui, LI Yujian. Synthesis of xanthan gum/AMPS/bentonite composite water plugging agent for oil field[J]. Journal of Petrochemical Universities, 2011, 24(6):42-45. [14] 刘静,康毅力,刘大伟,等. 考虑裂缝宽度及压差的裂缝-孔隙型储层屏蔽暂堵实验研究[J]. 钻采工艺,2006,29(2):97-98.LIU Jing, KANG Yili, LIU Dawei, et al. Research on the temporary shielding plugging experiment in considering fracture- pore reservoir of fracture width and pressure difference[J]. Drilling & Production Technology, 2006, 29(2):97-98. [15] 杨健,骆进,冉金成,等. 低压气井暂堵修井工艺技术探讨[J]. 天然气工业,2007,27(5):81-84. doi: 10.3321/j.issn:1000-0976.2007.05.025YANG Jian, LUO Jin, RAN Jincheng, et al. Probe into temporary plugging technology used in low-pressure gas well for workover[J]. Natural Gas Industry, 2007, 27(5):81-84. doi: 10.3321/j.issn:1000-0976.2007.05.025 -
点击查看大图
图(5) / 表(3)
计量
- 文章访问数: 216
- HTML全文浏览量: 72
- PDF下载量: 46
- 被引次数: 0
