Study and Application of Formation Environment Responsive Plugging Material
-
摘要: 针对现有井壁稳定材料难以精准匹配地层微裂缝,缺乏地层识别和选择性作用的能力,提出了地层环境响应井壁稳定材料研发技术思路。通过建立基于地层环境因素驱动的响应机制,优化地层环境下活性组分的反应形式和形态变化,活性组分与载体材料的组装方式,设计研发出地层环境响应封堵材料SMFG-1。该产品表现出优异的地层响应性能和极佳的配伍性能,显著改善泥饼质量且环保无毒,pH值敏感范围为6~8之间,可在地层中快速响应形成沉淀,封堵地层孔喉和微裂缝,具有响应释放灵敏性和可控性。6次pH响应循环后,释放析出率仍高达99.55%。SMFG-1在北XY-HF井复杂井段成功现场应用中,提高钻井液的封堵能力、稳定井壁,成功解决硬脆性泥岩发育、裂隙发育、易垮塌掉块等井壁失稳难题,保障复杂井段钻井安全。Abstract: The borehole wall stabilizing materials presently in use have particle sizes that are unable to accurately match the sizes of micro-fractures in the formations drilled and lack the ability to identify the formation with fractures to plug and the required selective action. A technical clue for developing formation environment responsive borehole wall stabilizing materials is presented to solve these problems. A responsive mechanism based on driving factors that are formation-related is established for the purpose of optimizing the reaction form, the morphological change of the active components in formation environment and the assembling methods of the active components and the carrier materials. Based on these studies, a formation environment responsive plugging material, SMFG-1, was developed. SMFG-1 has excellent formation responsive performance and compatibility with other drilling fluid components, it remarkably improves the quality of mud cakes, and is environmentally friendly. The pH of SMFG-1 is 6 - 8. SMFG-1 can form sediments in formation through quick responsiveness, thereby plugging pore throats and microfractures. SMFG-1 can release particles to plug microfractures with great sensitivity under controllable manner. After six pH response cycles, the release rate is still as high as 99.55%. SMFG-1 has been successfully used in drilling the complex hole section of the well Bei-XY-HF. As a result of using the SMFG-1 plugging agent, the plugging capacity of the drilling fluid was improved, and the borehole wall was stabilized. The problems encountered in drilling the easy-to-collapse hard and brittle shales with fractures and cracks were avoided and the safety of drilling the complex hole section was achieved.
-
Key words:
- Environment responsive /
- Wellbore stabilization /
- Formation Factor-induced /
- Plugging /
- Drilling fluid
-
表 1 不同温度下的SMFG-1钻井液性能评价
SMFG-1/
%实验
条件PV/
mPa·sYP/
PaFLAPI/
mLFLHTHP/
mL0 常温 4.0 4.5 17.5 52.4 0.5 7.0 2.0 13.2 30.4 1.0 9.0 2.0 11.4 28.0 1.5 10.0 2.5 9.8 21.2 2.0 11.5 2.5 7.2 18.4 0 120 ℃×16 h 5.5 3.5 24.6 66.8 0.5 4.0 1.5 21.4 38.2 1.0 5.5 1.0 19.4 34.6 1.5 5.5 1.5 14.6 29.8 2.0 6.5 2.0 9.8 25.4 0 150 ℃×16 h 6.0 1.5 28.0 84.2 0.5 4.0 0.5 23.8 49.6 1.0 5.0 1.0 21.2 42.8 1.5 5.0 1.0 18.6 36.4 2.0 6.0 1.0 12.8 31.2 -
[1] 孔勇. 温敏变形封堵剂合成研究与应用[J]. 钻井液与完井液,2021,38(6):677-683.KONG Yong. Synthesis research and application of the temperature sensitive deformation plugging drilling fluid additive[J]. Drilling Fluid & Completion Fluid, 2021, 38(6):677-683. [2] 杨加伟,熊青山,吴胜,等. 页岩气水平井防塌水基钻井液体系研究[J]. 科学技术与工程,2021,21(12):4891-4896. doi: 10.3969/j.issn.1671-1815.2021.12.020YANG Jiawei, XIONG Qingshan, WU Sheng, et al. Anti-sloughing water based drilling fluid system for shale gas horizontal wells[J]. Science Technology and Engineering, 2021, 21(12):4891-4896. doi: 10.3969/j.issn.1671-1815.2021.12.020 [3] 李雄,董晓强,金军斌,等. 超高温高密度钻井液体系的研究与应用[J]. 钻井液与完井液,2020,37(6):694-700. doi: 10.3969/j.issn.1001-5620.2020.06.003LI Xiong, DONG Xiaoqiang, JIN Junbin, et al. Study and application of an ultra-high temperature high density drilling fluid[J]. Drilling Fluid & Completion Fluid, 2020, 37(6):694-700. doi: 10.3969/j.issn.1001-5620.2020.06.003 [4] 孔勇,杨小华,徐江,等. 抗高温防塌处理剂合成研究与评价[J]. 钻井液与完井液,2016,33(2):17-21.KONG Yong, YANG Xiaohua, XU Jiang, et al. Synthesis and evaluation of a high temperature inhibitive additive[J]. Drilling Fluid & Completion Fluid, 2016, 33(2):17-21. [5] 豆宁辉,王志远,刘殿琛. 复杂地层防塌钻井液体系优化研究[J]. 钻采工艺,2020,43(6):103-106.DOU Ninghui, WANG Zhiyuan, LIU Dianchen. Study on drilling fluid system optimization for preventing collapse in complex formation[J]. Drilling & Production Technology, 2020, 43(6):103-106. [6] 陈修平,李双贵,于洋,等. 顺北油气田碳酸盐岩破碎性地层防塌钻井液技术[J]. 石油钻探技术,2020,48(2):12-16. doi: 10.11911/syztjs.2020005CHEN Xiuping, LI Shuanggui, YU Yang, et al. Anti-collapse drilling fluid technology for broken carbonate formation in Shunbei oil and gas field[J]. Petroleum Drilling Techiques, 2020, 48(2):12-16. doi: 10.11911/syztjs.2020005 [7] 李成,白杨,于洋,等. 顺北油田破碎地层井壁稳定钻井液技术[J]. 钻井液与完井液,2020,37(1):15-22.LI Cheng, BAI Yang, YU Yang, et al. Study and application of drilling fluid technology for stabilizing fractured formations in Shunbei oilfield[J]. Drilling Fluid & Completion Fluid, 2020, 37(1):15-22. [8] 余加水,尤志良,付超胜,等. 胶结型强封堵防塌剂的研制与性能评价[J]. 油田化学,2020,37(4):571-574,580.YU Jiashui, YOU Zhiliang, FU Chaosheng, et al. Development and performance evaluation of strong plugging and anti-collapse agent with cementation type[J]. Oilfield Chemistry, 2020, 37(4):571-574,580. [9] 吴雄军,林永学,金军斌,等. 川西低渗气藏井壁修补强化钻井液技术[J]. 断块油气田,2021,28(2):269-273.WU Xiongjun, LIN Yongxue, JIN Junbin, et al. Wellbore stability drilling fluid technology for low permeability gas reservoir in Western Sichuan[J]. Fault-Block Oil & Gas Field, 2021, 28(2):269-273. [10] 李蕾,郭保雨,王旭东,等. 一种化学胶结类防塌剂防塌效果的评价方法[J]. 钻井液与完井液,2020,37(5):608-612.LI Lei, GUO Baoyu, WANG Xudong, et al. A method of evaluating the effect of a chemical bonding anti-sloughing agent[J]. Drilling Fluid & Completion Fluid, 2020, 37(5):608-612. -