Synthesis and Application of a Temperature Sensitive Deformable Plugging Agent
-
摘要: 针对现有可变形封堵防塌处理剂作用温度过窄的问题，基于地层温度诱导控制材料形态变化实现对地层定向吸附的技术思路，开展温敏变形封堵处理剂分子结构设计，通过优化设计骨架、形变和分散性能，利用诱发分子内交联反应逐级拓宽有效作用温度区间，研发出适用于100～150 ℃的温敏变形封堵剂SMSHIELD-2。通过红外光谱、核磁和压力传递实验等对SMSHIELD-2进行结构表征和性能评价。结果表明SMSHIELD-2在100～150 ℃广谱温度范围内，有效封堵硬脆性泥岩的微裂缝，提高钻井液的封堵防塌性能且具有良好的配伍性。SMSHIELD-2在新疆顺北X1井复杂井段应用中，通过封堵地层原生孔隙和微裂缝，提高钻井液的封堵能力，稳定井壁，保障了复杂地层钻井安全。Abstract: Molecular structure design of temperature-sensitive deformable lost circulation materials (LCMs) was conducted in an effort to find a way of overcoming the problems existed in the current LCMs which can only be used in too narrow a temperature range. Based on the technical clue of directional adsorption of LCMs on the formations via deformation of the LCMs under the influence of formation temperature, a temperature-sensitive deformable LCM named SMSHIELD-2 was successfully developed through optimized design of molecular chain, deformability and dispersibility. The SMSHIELD-2 can be used in temperatures from 100 ℃ to 150 ℃ and the temperature range in which the SMSHIELD-2 can perform effectively is gradually broadened using induced intramolecular crosslinking reaction. Molecular structure characterization and performance evaluation of SMSHIELD-2 with IR spectrometry, NMR and pressure transfer tests show that SMSHIELD-2 functions properly in a wide temperature range between 100 ℃ and 150 ℃. SMSHIELD-2 has good compatibility with other additives. It is able to effectively seal off microfractures in hard brittle shales and to improve the plugging and anti-collapse performance of drilling fluids. SMSHIELD-2 was used in drilling the complex hole section of the well X1 in Shunbei block in Xinjiang. By plugging the primary pores and micro-fractures in the formations with SMSHIELD-2, the well was successfully drilled, and two new engineering records was made.
-
Key words:
- Temperature sensitive /
- Anti-collapse /
- Seal and plug /
- Design of molecular structure /
- Drilling fluid
-
表 1 SMSHIELD-2与其他封堵剂的对比
封堵剂 FLHTHP/mL △FL/% 空白 56 2.5%国内1 28 50 2.5% 国内2 26 54 2.5%国内3 27 52 2.5%Baker Hughes 23 59 2.5%Chevron 21 62 1%SMSHIELD-2 20 64 2.5%SMSHIELD-2 13 77 注：基浆配方：4% 预水化膨润土浆+4%英国评价土；在120 ℃滚动16 h后在120 ℃温度下测定滤失量 
下载: 导出CSV
表 2 岩样受温敏变形封堵防塌剂作用前后的渗透率
测试试液 岩样的渗透率/mD 空白岩样 1.24×10−2 基浆 3.21×10−4 基浆+2% SMSHIELD-2 2.52×10−5 注：实验温度为100 ℃
下载: 导出CSV
表 3 岩样受温敏变形封堵防塌剂作用前后的渗透率
测试试液 岩样的渗透率/mD 空白岩样 2.90×10−3 基浆 1.05×10−4 基浆+3% SMSHIELD-2 5.54×10−5 注：实验温度为150 ℃
下载: 导出CSV
表 4 不同温度下的SMSHIELD-2性能评价
基
浆封 堵 /
剂%实验
条件PV/
mPa·sYP/
PaFLAPI/
mLFLHTHP/
mL△FL/
%1# 0 100 ℃、16 h 22 6 2.8 14.2 1.5 100 ℃、16 h 21 5.5 2.4 8.0 43.7 2# 0 120 ℃、16 h 26 7.5 2.3 14.6 2 120 ℃、16 h 25.5 7.5 2.4 8.2 43.8 3# 0 150 ℃、16 h 28 8 2.4 15.4 3 150 ℃、16 h 28.5 8.5 2.2 8.4 45.5 注：1#基浆 ：4%预水化膨润土浆+ (0.2%～0.3%)PAC-LV+1%SMC+1%SMP+0.1%NaOH；2#基浆：4%预水化膨润土浆+ (0.3%～0.4%) PAC-LV+1.5%SMC+1.5%SMP+
0.1%NaOH；3#基浆：4%预水化膨润土浆+(0.4%～
0.5%)PAC-LV+2%SMC+2%SMP+0.1%NaOH
下载: 导出CSV
-
[1] 孔勇,杨小华,徐江,等. 抗高温强封堵防塌钻井液体系研究与应用[J]. 钻井液与完井液,2016,33(6):17-22. doi: 10.3969/j.issn.1001-5620.2016.06.003KONG Yong, YANG Xiaohua, XU Jiang, et al. Study and application of a high temperature drilling fluid with strong plugging capacity[J]. Drilling Fluid & Completion Fluid, 2016, 33(6):17-22. doi: 10.3969/j.issn.1001-5620.2016.06.003 [2] 杨加伟,熊青山,吴胜,等. 页岩气水平井防塌水基钻井液体系研究[J]. 科学技术与工程,2021,21(12):4891-4896. doi: 10.3969/j.issn.1671-1815.2021.12.020YANG Jiawei, XIONG Qingshan, WU Sheng, et al. Anti-sloughing water based drilling fluid system for shale gas horizontal wells[J]. Science Technology and Engineering, 2021, 21(12):4891-4896. doi: 10.3969/j.issn.1671-1815.2021.12.020 [3] 李雄,董晓强,金军斌,等. 超高温高密度钻井液体系的研究与应用[J]. 钻井液与完井液,2020,37(6):694-700. doi: 10.3969/j.issn.1001-5620.2020.06.003LI Xiong, DONG Xiaoqiang, JIN Junbin, et al. Study and application of an ultra-high temperature high density drilling fluid[J]. Drilling Fluid & Completion Fluid, 2020, 37(6):694-700. doi: 10.3969/j.issn.1001-5620.2020.06.003 [4] 孔勇,杨小华,徐江,等. 抗高温防塌处理剂合成研究与评价[J]. 钻井液与完井液,2016,33(2):17-21.KONG Yong, YANG Xiaohua, XU Jiang, et al. Synthesis and evaluation of a high temperature inhibitive additive[J]. Drilling Fluid & Completion Fluid, 2016, 33(2):17-21. [5] 余加水,尤志良,付超胜,等. 胶结型强封堵防塌剂的研制与性能评价[J]. 油田化学,2020,37(4):571-574+580.YU Jiashui, YOU Zhiliang, FU Chaosheng, et al. Development and performance evaluation of strong plugging and anti-collapse agent with cementation type[J]. Oilfield Chemistry, 2020, 37(4):571-574+580. [6] 豆宁辉,王志远,刘殿琛. 复杂地层防塌钻井液体系优化研究[J]. 钻采工艺,2020,43(6):103-106.DOU Ninghui, WANG Zhiyuan, LIU Dianchen. Study on drilling fluid system optimization for preventing collapse in complex formation[J]. Drilling & Production Technology, 2020, 43(6):103-106. [7] 陈修平,李双贵,于洋,等. 顺北油气田碳酸盐岩破碎性地层防塌钻井液技术[J]. 石油钻探技术,2020,48(2):12-16. doi: 10.11911/syztjs.2020005CHEN Xiuping, LI Shuanggui, YU Yang, et al. Anti-collapse drilling fluid technology for broken carbonate formation in Shunbei oil and gas field[J]. Petroleum Drilling Techiques, 2020, 48(2):12-16. doi: 10.11911/syztjs.2020005 [8] 吴雄军,林永学,金军斌,等. 川西低渗气藏井壁修补强化钻井液技术[J]. 断块油气田,2021,28(2):269-273.WU Xiongjun, LIN Yongxue, JIN Junbin, et al. Wellbore stability drilling fluid technology for low permeability gas reservoir in western Sichuan[J]. Fault-Block Oil & Gas Field, 2021, 28(2):269-273. [9] 李蕾,郭保雨,王旭东,等. 一种化学胶结类防塌剂防塌效果的评价方法[J]. 钻井液与完井液,2020,37(5):608-612.LI Lei, GUO Baoyu, WANG Xudong, et al. A method of evaluating the effect of a chemical bonding anti-sloughing agent[J]. Drilling Fluid & Completion Fluid, 2020, 37(5):608-612. [10] 李成,白杨,于洋,等. 顺北油田破碎地层井壁稳定钻井液技术[J]. 钻井液与完井液,2020,37(1):15-22.LI Cheng, BAI Yang, YU Yang, et al. Study and application of drilling fluid technology for stabilizing fractured formations in Shunbei oilfield[J]. Drilling Fluid & Completion Fluid, 2020, 37(1):15-22. [11] 李建山. 杭锦旗区块防塌防漏钻井液技术[J]. 钻井液与完井液,2019,36(3):308-314. doi: 10.3969/j.issn.1001-5620.2019.03.008LI Jianshan. Drilling fluid technology for borehole wall stabilization and mud loss control in block Hangjinqi[J]. Drilling Fluid & Completion Fluid, 2019, 36(3):308-314. doi: 10.3969/j.issn.1001-5620.2019.03.008 -
点击查看大图
图(7) / 表(4)
计量
- 文章访问数: 680
- HTML全文浏览量: 281
- PDF下载量: 97
- 被引次数: 0
