留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

杨倩云, 王宝田, 杨华. 泡沫钻井液发泡剂抗温性评价方法[J]. 钻井液与完井液, 2021, 38(3): 305-310. doi: 10.3969/j.issn.1001-5620.2021.03.007
引用本文: 杨倩云, 王宝田, 杨华. 泡沫钻井液发泡剂抗温性评价方法[J]. 钻井液与完井液, 2021, 38(3): 305-310. doi: 10.3969/j.issn.1001-5620.2021.03.007
YANG Qianyun, WANG Baotian, YANG Hua. Applicability of Methods for Evaluating Temperature Resistance of Foaming Agents Used in Foam Drilling Fluids[J]. DRILLING FLUID & COMPLETION FLUID, 2021, 38(3): 305-310. doi: 10.3969/j.issn.1001-5620.2021.03.007
Citation: YANG Qianyun, WANG Baotian, YANG Hua. Applicability of Methods for Evaluating Temperature Resistance of Foaming Agents Used in Foam Drilling Fluids[J]. DRILLING FLUID & COMPLETION FLUID, 2021, 38(3): 305-310. doi: 10.3969/j.issn.1001-5620.2021.03.007

泡沫钻井液发泡剂抗温性评价方法

doi: 10.3969/j.issn.1001-5620.2021.03.007
详细信息
    作者简介:
  • 中图分类号: TE254.3

Applicability of Methods for Evaluating Temperature Resistance of Foaming Agents Used in Foam Drilling Fluids

  • 摘要: 为了满足钻井深部低压地层、地热和干热岩等不同地层温度的泡沫钻井液,笔者对关键组分发泡剂的抗温性评价方法进行了适应性研究。基于机械搅拌的热滚评价法和干粉加热法,对比分析了3种工业化抗高温发泡剂十二烷基苯磺酸钠SDBS、十二烷基硫酸钠SDS和α-烯烃磺酸钠AOS,考察了温度对其起泡性、泡沫流体稳定性和流变性影响。实验结果表明,采用评价方法不同,同一发泡剂实验结果不同,采用热滚评价法时,室温~190℃,SDS抗温性能优于AOS和SDBS,但SDS抗温小于200℃,而AOS和SDBS在240℃、16 h环境下,依然具有良好的起泡性;采用干粉加热评价法,AOS和SDBS抗温不低于260℃、4 h,SDS抗温低于150℃、3 h。在实验的基础上,针对微泡沫钻井液的研发,推荐使用热滚法评价发泡剂的抗温性能,并针对不同地层温度给出适宜性建议。

     

  • [1] 胡继良,陶士先,单文军,等. 超深井高温钻井液技术概况及研究方向的探讨[J]. 地质与勘探,2012,48(1):155-159.

    HU Jiliang,TAO Shixian,SHAN Wenjun,et al. Discussion on technology overview and research direction of the high temperature drilling fluid in ultra-deep well[J]. Geology and Exploration,2012,48(1):155-159.
    [2] 单文军,陶士先,胡继良,等.高温盐水钻井液技术难点及国内外研究现状[J]. 地质与勘探,2013,49(5):976-980.

    SHAN Wenjun,TAO Shixian,HU Jiliang,et al. Technical difficulties of high-temperature brine drilling fluid and its research status at home and abroad[J]. Geology and Exploration,2013,49(5):976-980.
    [3] 董海燕,单文军,李艳宁,等. 耐高温泡沫钻井液技术研究概况及研究方向探讨[J]. 地质与勘探,2014, 50(5):991-996.

    DONG Haiyan,SHAN Wenjun,LI Yanning,et al. Research progress and direction of the anti-high temperature foam drilling fluid technology[J].Geology and Exploration,2014,50(5):991-996.
    [4] GROWCOCK F B,BELKIN A,FOSDICK M,et al. Recent advances in aphorn drilling fluids[C].IADC/SPE 97982:1-7.
    [5] CRAIG C WHITE,ADRIAN P,CATALIN DAND ROB. Aphron-based drilling fluid:novel technology for drilling depleted formations in the NorthSea[R].SPE 79840:1-6.
    [6] 刘振东,唐代绪,刘从军,等.无固相微泡沫钻井液的研究及应用[J].钻井液与完井液,2012,29(3):33-35.

    LIU Zhendong,TANG Daixv,LIU Congjun,et al. Research and application of solid-free micro-foam drilling fluid[J].Drilling Fluid & Completion Fluid,2012,29(3):33-35.
    [7] 赵建兵,王世兵,王蒙蒙,等. 泡沫流体稳定性受温度影响分析[J]. 广州化工,2015,43(7):98-117.

    ZHAO Jianbing,WANG Shibing,WANG Mengmeng, et al.Analysis of foaming fluid's stability influenced by temperature[J].Guangzhou Chemical Industry,2015,43(7):98-117.
    [8] 李公让. 泡沫钻井流体温度敏感性研究[J]. 石油钻探技术,2011,39(4):34-39.

    LI Gongrang.Study of foam drilling fluid temperature sensitivity[J].Drilling Petroleum Techniques,2011,39(4):34-39.
    [9] 赖晓晴,楼一珊,屈沅治,等.超高温地热井泡沫钻井流体技术[J].钻井液与完井液,2009,26(2):37-38.

    LAI Xiaoqing,LOU Yishan,QU Yuanzhi,et al. Foam drilling fluid technology for ultra-high temperature geothermal wells[J].Drilling Fluid & Completion Fluid, 2009,26(2):37-38.
    [10] 王文勇,孟英峰,刘博伟,等.超高温地热井钻井泡沫抗高温性能研究[J]. 钻采工艺,2012,35(1):78-80.

    WANG Wenyong,MENG Yingfeng,LIU Bowei,et al. Research on anti-high temperature performance of foam for drilling ultra-high temperature geothermal wells[J]. Drilling & Production Technology,2012,35(1):78-80.
    [11] 邱正松,张锐,徐加放,等.泡沫钻井液高温高压密度特性模拟实验研究[J]. 石油钻探技,2002,30(1):4-6.

    QIU Zhengsong,ZHANG Rui,XU Jiafang,et al. Studies on HTHP density characteristics simulating test of foam drilling fluids[J].Drilling Petroleum Techniques, 2002,30(1):4-6.
    [12] 胡钶,王其伟,郭平,等.耐高温泡沫剂的综合评价与新产品开发[J].青岛科技大学学报:自然科学版, 2010,31(3):274-278.

    HU Ke,WANG Qiwe i,GUO Ping, et al. Comprehensive evaluation of high temperature foaming agent and new product developing[J].Journal of Qingdao University of Science and Technology (Natural Science Edition),2010,31(3):274-278.
    [13] 王军志. 高温高压条件下DP-4泡沫剂的稳定性能评价[J].油气地质与采收率, 2009,16(1):66-68.

    WANG Junzhi.Foam stability evaluation of foam agent DP-4 on high temperature and pressure[J].Petroleum Geology and Recovery Efficiency,2009,16(1):66-68.
    [14] 孙建峰,郭东红,辛浩川,等.JP系列高温泡沫剂的合成及性能评价[J].石油钻采工艺,2011,33(2):117-119.

    SUN Jianfeng,GUO Donghong,XIN Haochuan,et al. Synthesis and property evaluation of JP series high temperature resistant foam agents[J].Oil Drilling & Production Technology,2011,33(2):117-119.
    [15] 王腾飞,王杰祥,樊泽霞.抗温耐盐泡沫剂QP-2的评价[J].油田化学,2012,29(4):431-434.

    WANG Tengfei,WANG Jiexiang,FAN Zexia. Evaluation of temperature and salt resistance foaming agent QP-2[J].Oilfield Chemistry,2012,29(4):431-434.
    [16] 王庆,刘永革,吕朝辉,等.高温发泡剂性能评价新方法[J]. 特种油气藏,2015,22(3):93-96.

    WANG Qing,LIU Yongge,LYU Zhaohui,et al.A new performance evaluation of high-temperature foaming agent[J].Special Oil and Gas Reservoir,2015,22(3):93-96.
    [17] 闫方平.泡沫封堵体系发泡剂的筛选与评价[J].辽宁化工,2018,47(2):97-102.

    YAN Fangping.Evaluation and selection of foaming agents in foam sealing system[J].Liaoning Chemical Industry,2018,47(2):97-102.
    [18] 翁大丽,高启超,任树亮,等.热采变温条件下发泡剂评价指标及方法研究[J]. 陕西理工学院学报(自然科学版),2016,32(1):30-33.

    WENG Dali,GAO Qichao,REN Shuliang,et al. Research of the evaluation index and method for foaming agents under the variable temperature conditions of thermal recovery[J].Journal of Shanxi University of Technology(Natural Science Edition),2016,32(1):30-33.
    [19] 刘涛,刘万琴.稠油热采高温发泡剂的性能评价[J]. 江汉石油科技,2016,26(3):44-49.

    LIU Tao,LIU Wangqin.Performance evaluation of high temperature foaming agent for heavy oil thermal recovery[J].Jianghan Petroleum Science and Technology, 2016,26(3):44-49.
  • 加载中
计量
  • 文章访问数:  28
  • HTML全文浏览量:  4
  • PDF下载量:  11
  • 被引次数: 0
出版历程
  • 收稿日期:  2021-01-23

目录

    /

    返回文章
    返回