留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

TC4钛合金在有机盐完井液中的腐蚀性能

赵国仙 高飞

赵国仙, 高飞. TC4钛合金在有机盐完井液中的腐蚀性能[J]. 钻井液与完井液, 2020, 37(2): 264-268. doi: 10.3969/j.issn.1001-5620.2020.02.022
引用本文: 赵国仙, 高飞. TC4钛合金在有机盐完井液中的腐蚀性能[J]. 钻井液与完井液, 2020, 37(2): 264-268. doi: 10.3969/j.issn.1001-5620.2020.02.022
ZHAO Guoxian, GAO Fei. Anti-Corrosion Behavior of TC4 Alloy In Organic Salt Completion Fluid[J]. DRILLING FLUID & COMPLETION FLUID, 2020, 37(2): 264-268. doi: 10.3969/j.issn.1001-5620.2020.02.022
Citation: ZHAO Guoxian, GAO Fei. Anti-Corrosion Behavior of TC4 Alloy In Organic Salt Completion Fluid[J]. DRILLING FLUID & COMPLETION FLUID, 2020, 37(2): 264-268. doi: 10.3969/j.issn.1001-5620.2020.02.022

TC4钛合金在有机盐完井液中的腐蚀性能

doi: 10.3969/j.issn.1001-5620.2020.02.022
基金项目: 

西安石油大学研究生创新与实践能力培养计划资助项目(YCS18212047)

详细信息
    作者简介:

    赵国仙,教授,1968生,2005年毕业于西安交通大学,现在从事石油管的腐蚀与防护工作。电话13891999332,E-mail:419670963@qq.com

    通讯作者:

    高飞,电话15509233195,E-mail:1149793464@qq.com

  • 中图分类号: TE988.2

Anti-Corrosion Behavior of TC4 Alloy In Organic Salt Completion Fluid

  • 摘要: 针对钛合金在苛刻油田环境中的适用性,通过模拟腐蚀失重实验以及电化学测试分析,研究了TC4钛合金在高温高压完井液中的抗腐蚀及电化学腐蚀行为。结果表明,在总压为10 MPa,密度为1.4 g/cm3的甲酸钾完井液环境中经过360 h腐蚀,TC4钛合金有较高的腐蚀速率,其抗腐蚀性能较差,在210℃时,腐蚀速率达0.1361 mm/a。TC4钛合金阳极极化曲线均有钝化区,随温度升高,自腐蚀电流密度增大,腐蚀倾向性增大。电化学阻抗谱有明显的容弧特征,电荷转移电阻随温度升高减小很快,钝化膜的保护性减弱,表明TC4钛合金在高温高压甲酸钾完井液中的抗腐蚀性逐渐降低。

     

  • [1] 杨向同, 肖伟伟, 刘洪涛, 等. 甲酸盐对套管/油管腐蚀速率评价方法与影响因素[J]. 钻井液与完井液, 2016, 33(6):51-57.

    YANG Xiangtong, XIAO Weiwei, LIU Hongtao, et al. Method of evaluating corrosion rate of formates to casing and tubing strings and the influencing[J].Drilling Fluid & Completion Fluid, 2016, 33(6):51-57.
    [2] 赵国仙, 吕祥鸿. 塔里木油田国产油套管订货补充技术条件制定及推广应用[R]. 库尔勒:塔里木油田公司油气工程院, 2011. ZHAO Guoxian, LYU Xianghong.Formulation and application of supplementary technical conditions for ordering domestic oil casings in Tarim oilfield[R].Korla:Institute of oil and gas engineering, Tarim Oilfield Company, 2011.
    [3] 杜伟, 李鹤林. 海洋石油装备材料的应用现状及发展建议(下)[J]. 石油管材与仪器, 2015, 1(6):1-5.

    DU Wei, LI Helin. Application status and development suggestions on offshore oil equipment materials(Part Ⅱ)[J]. Petroleum Tubular Goods & Instruments,2015,1(6):1-5.
    [4] 訾群. 钛合金研究新进展及应用现状[J]. 钛工业进展, 2008(2):23-27. ZI Qun.New development of titanium alloy and its application actuality[J].Titanium Industry Progress, 2008

    (2):23-27.
    [5] HARGRAVE B, GONZALEZ M, MASKOS K, et al. Titanium Alloy Tubing for HPHT OCTG Applications. 65th NACE Annual Conference, San Antonio, Texas, March 14-18, 2010[R].Houston:Omnipress, 2010.
    [6] MANUEL GONZALEZ, MASKOS KRYSTIAN, HARGRAVE, et al.Titanium alloy tubing for HPHT applications[C]//SPE International.Society of Petroleum Engineers, 2008.
    [7] 刘强, 惠松骁, 宋生印, 等. 油气开发用钛合金油井管选材及工况适用性研究进展[J]. 材料导报, 2019, 33(5):841-853.

    LIU Qiang, HUI Songxiao, SONG Shengyin, et al. Materials selection of titanium alloy OCTG used for oil and gas exploration and their applicability under service condition:a survey[J].Material Reports, 2019, 33(5):841-853.
    [8] 李渭亮, 张慧娟, 杜春朝, 等.CO2 渗入对C110管柱在甲酸盐完井液中腐蚀行为的影响[J]. 材料保护, 2018, 51(10):47-49.

    LI Weiliang, ZHANG Huijuan, DU Chunchao, et al. Effect of CO 2 on the corrosion behavior of C110 carbon steel in formate solution environment[J].Material Protection, 2018, 51(10):47-49.
    [9] 张智, 郑钰山, 李晶, 等. 含CO2 甲酸盐完井液中超级13Cr不锈钢的局部腐蚀性能[J]. 材料保护, 2018, 51(8):26-31.

    ZHANG Zhi, ZHENG Yushan, LI Jing, et al. Localized corrosion resistance of super 13Cr stainless steel in formate completion fluid containing CO2[J]. Material Protection, 2018, 51(8):26-31.
    [10] 杨向同, 吕祥鸿, 谢俊峰, 等. 高强15Cr马氏体不锈钢在有机盐完井液中的腐蚀行为[J]. 腐蚀与防护, 2018, 39(12):901-905

    , 911. YANG Xiangtong, LU Xianghong, XIE Junfeng, et al. Corrosion behavior of high strength 15Cr martensitic stainless steel in organic salt completion fluid[J]. Corrosion & Protection, 2018, 39(12):901-905, 911.
    [11] 吕祥鸿, 高文平, 谢俊峰, 等. 钛合金油管在苛刻井下环境中的抗腐蚀性能研究[J]. 热加工工艺, 2017, 46(6):58-62.

    LYU Xianghong, GAO Wenping, XIE Junfeng, et al. Study on corrosion resistance of titanium alloy tube in harsh downhole environment[J].Hot Working Technology, 2017, 46(6):58-62.
    [12] TOTOLIN V, PEJAKOVI V, CSANYI T, et al. Surface engineering of Ti6Al4V surfaces for enhanced tribocorrosion performance in artificial seawater[J]. Materials & Design, 2016, 104:10-18.
    [13] 林玉珍, 杨德钧. 腐蚀和腐蚀控制原理[M]. 北京:中国石化出版社, 2007:203-209. LIN Yuzhen, YANG Dejun. Principles of corrosion and corrosion control[M].Beijing:Sinopec press, 2007:203

    -209.
    [14] 谢飞, 杨晓峰, 王丹, 等. 库尔勒土壤模拟溶液的pH对X80管线钢电化学腐蚀行为的影响[J]. 机械工程材料, 2015, 39(4):59-62.

    XIE Fei, YANG Xiaofeng, WANG Dan, et al. Effect of pH value of soil simulation solution on electrochemical corrosion behavior of X80 pipeline steel[J].Mechanical Engineering Materials, 2015, 39(4):59-62.
    [15] GROWCOCK F, JASINSKI R J.Time-resolved impedance spectroscopy of mild steel in concentrated hydrochloric acid[J].Journal of Electrochemical Society, 136(8):23102-314.
    [16] 谢丽华, 陈长风, 李鹤林, 等. 镍基合金和铬在高温下的腐蚀电化学特征[J]. 西安石油大学学报(自然科学版), 2012, 27(2):76. XIE Lihua, CHEN Changfeng, LI Helin, et al. Electrochemical characteristics of corrosion of nickel base alloy and chromium at high temperature[J].Journal of Xi'an University of Petroleum(Natural Science Edition), 2012, 27(2):76.
    [17] WILLIAM C.WEST, ZACHARY D.HOOD, SHIBA P.Adhikah,et al. Reduction of charge-transfer resistance at the solid electrolyte-electrode interface by pulsed laser deposition of films from a crystalline Li2PO2N source[J]. Journal of Power Sources, 2016:116-122.
    [18] 吕祥鸿, 张晔, 谢俊锋, 等. 高pH值完井液中超级13Cr油管的腐蚀失效及SCC机制[J]. 中国石油大学学报(自然科学版), 2020, 44(1

    ):141-148. LYU Xianghong, ZHANG Ye, XIE Junfeng, et al. Corrosion failure and SCC mechanism of super 13Cr tubings in high pH completion fluid[J].Journal of China University of Petroleum(Edition of Natural Science), 2020, 44(1):141-148.
  • 加载中
计量
  • 文章访问数:  691
  • HTML全文浏览量:  174
  • PDF下载量:  129
  • 被引次数: 0
出版历程
  • 收稿日期:  2020-02-25
  • 刊出日期:  2020-04-28

目录

    /

    返回文章
    返回